ProgramMaster Logo
Conference Tools for 2022 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2022 TMS Annual Meeting & Exhibition
Symposium Phase Stability, Phase Transformations, and Reactive Phase Formation in Electronic Materials XXI
Presentation Title Morphological Effect of Patterned Sapphire Substrate on Efficiency of White-light Phosphor LED Package
Author(s) Chia-Yueh Chou, Cheng-Yi Liu
On-Site Speaker (Planned) Chia-Yueh Chou
Abstract Scope Six-facets patterned sapphire substrates (A-PSS) are manufactured by wet-etching regular semispherical patterned sapphire substrates (r-PSS). MOCVD GaN epitaxial LED structure was grown on the c-plane sapphire wafer, r-PSS, and A-PSS. Remarkably, the output power of the white-light packaged LED on the A-PSS is larger than the white-light packaged LED on the r-PSS. The Monte Carlo ray tracing simulation shows that, before and after silicone-lens encapsulating, the sidewall emission power ratio of LED on r-PSS decreases by 3.44% after encapsulating. On the other hand, the sidewall emission power ratio of the LED on A-PSS increases by 1.06% after encapsulating. The reason for LED on A-PSS having a less package loss and the white-light package efficiency than LED on r-PSS will be discussed. In conclusion, the light radiation distribution pattern defined by A-PSS is the key for the better white-light package efficiency of the LED on A-PSS.
Proceedings Inclusion? Planned:
Keywords Electronic Materials, Ceramics, Surface Modification and Coatings

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

A Critical Analysis of Joining Processes for NiTi Shape Memory Alloys
Ab Initio Interfacial Stability and Cu-segregation Effect upon η’ and η2 Precipitates in Al-Zn-Mg-Cu Alloys
Bi Orientation-dependence and Mechanical Properties in a Sn-Bi-Ag Low-temperature Lead-free Solder
Comparison of NiCo and NiP Electroplating for Wear Resistant Probe Tip
Cu Sintering Process Modified by Adding a Low Temperature Liquid Sintering Step
Data-driven Rational Design of Conductive Copper-based Alloys with High Performance
Design of Multifunctional Architected Materials
Effect of Vertical Interfaces on Phase Transformation Behavior of MoS2
Electric Current-assisted Treatment for 7075 Aluminum Alloy to Withstand High-speed Impact
Electronic Material Properties Exploration Using Machine Learning: In Effective Charge, Hardness, and Dissipation Factor
Failure Analysis and Prediction of Solder Microbumps due to Side Wetting and Electromigration by 3D X-ray
Filp-chip Encapsulation with Hybrid Organic-inorganic Passivation of Perovskite Solar Cells
Interfacial Reaction between In Coated Cu Sheet and ENIG Substrate
Interfacial Reaction between Sn-rich Solder and FeCoNiCu High-entropy Alloy
Interfacial Reactions between Sn-0.7 Cu Alloys C194, Alloy25, and C1990 Substrates
Interfacial Reactions in the Sn/C194 and Sn-3.0Ag-0.5Cu/C194 Couples
Investigation of Thermal Properties and Thermal Reliability of Ga-based Low Melting Temperature Alloys as Thermal Interface Materials (TIMs)
Linked Metamaterials with Adaptable Stiffness
Mechanical Performance of Advanced Multicomponent Solder Alloy under Thermal Aging
Mesoscale Simulations Guiding Data-driven Design of Electronic Materials
Morphological Effect of Patterned Sapphire Substrate on Efficiency of White-light Phosphor LED Package
Novel Zr-based Alloy with Low Young's Modulus and Magnetic Susceptibility for Biomedical Implants
NOW ON-DEMAND ONLY - The Influence of Morphology in Ultrathin Ag Structure on ZnO/Ag/ZnO Transmittance Grown by Sputtering Compared with Simulation
Phase Transformation Temperatures of Sn-based Solder Alloys
Role of Composition in the Phase Transition of Ge-Sb-Te Alloys
Room-temperature Electrochemical Healing of Difficult-to-weld Metallic Materials
Self-healing Kirkendall Voids at the Joint Interface between Sn and <111> Oriented and Nano-twinned Cu
Self-healing of Fiber-composite Laminates via In Situ Thermal Remending
Solution-processed Perovskite Photoabsorbers with Mixed Cations for Improved Stability in Solar Cells
Study of Ferroelectricity and Phase Transitions in Hafnia
The Challenge of Machine Learning the Stability of Materials
Using Solid-liquid Phase Transformation in Fusible Metals as a Self-healing Mechanism for Next Generation Metal-ion Battery Anodes
Vat Polymerization of Adaptable and Reconfigurable Three-dimensional (3D) Micro-architected Materials

Questions about ProgramMaster? Contact programming@programmaster.org