ProgramMaster Logo
Conference Tools for 2024 TMS Annual Meeting & Exhibition
Register as a New User
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Symposium
Meeting 2024 TMS Annual Meeting & Exhibition
Symposium 2D Materials – Preparation, Properties, Modeling & Applications
Sponsorship TMS Functional Materials Division
TMS: Thin Films and Interfaces Committee
Organizer(s) Nuggehalli M. Ravindra, New Jersey Institute of Technology
Madan Dubey, US Army Research Laboratory
Hesam Askari, University of Rochester
Ritesh Sachan, Oklahoma State University
Joshua Young, New Jersey Institute Of Technology
Sufian Abedrabbo, Khalifa University
Gerald Ferblantier, University of Strasbourg - IUT LP / ICube Laboratory - CNRS
Ramana Chintalapalle, University of Texas at El Paso
Scope Since the discovery of Graphene, interest in basic and applied research in 2D-Materials is on the rise. Challenges and opportunities continue to grow in the areas of process-property-performance correlations in 2D- Materials. Efforts to transfer technology from fundamental R&D to prototyping to manufacturing are being pursued rigorously on a global scale.

Studies on materials such as Carbon Nanotubes, Graphene, Hexagonal Boron Nitride, Perovskites, Phosphorene, Transition Metal Dichalcogenides (TMDCs), Xenes (Germanene, Silicene, Stanene) are of interest to the Symposium.

This symposium will include, but will not be limited to the following topics:

Scope 1: Methods of Fabrication, Material Properties
- Top-Down Approach – Mechanical Exfoliation, Liquid Phase Exfoliation, Ball-Milling Based Exfoliation
- Bottom-Up Approach – Chemical Vapor Deposition, Wet Chemical Synthesis, Hydro/Solvothermal Synthesis
Material Properties
-Electrical, Electronic, Magnetic, Mechanical, Optical, Structural & Thermal Properties.

Scope 2: Modelling & Simulation
Band-Structure, Transport Properties, Optical Properties, Device Simulation
- Tools & Methods
- Data sets of Properties
- Standards, Methods

Scope 3: Device Fabrication, Properties & Applications
Studies focused on the use of these materials for the fabrication of membranes, 2D-sheets, 2- and 3- Terminal active and passive devices, photodetectors, sensors, transistors, applications in batteries, solar cells, thermoelectrics, topological insulators, energy storage, ultracapacitors, hydrogen storage, valleytronics, CO2 capture are some of the examples of interest to the Symposium.

Abstracts Due 07/15/2023
Proceedings Plan Planned:

2D Amorphous Carbon Dielectric Prepared from Solution Precursor for Nanoelectronics
2D Materials in Photovoltaics – An Overview
A-1: Enhancing Gas Sensing Performance with 2D Material-integrated Sub-wavelength Grating Micro-ring Resonator: Improved Sensitivity and Selective Detection
A-2: Exploring Stability of WSe2 under Heavy Ion Irradiation
A New Phase of Silicon and Its Optical, Electrical, and Magnetic Properties
A Novel 2D van der Waals Phase-change Material Based on Transition-metal Binary Chalcogenide NbTe4
A Novel Solid Solution MXene with High Gravimetric Capacitance
Addressing Unmet Needs with 3D Printed Nanomaterials-based Electronics
An Overview of the Synthetic Route of Molybdenum Diselenide Nanoparticles
Chemical Vapor Deposition Synthesis of 2D Refractory Metal Carbides
Computational Investigation of MAX as Intercalation Host for Rechargeable Aluminum-ion Battery
Computational Search for van der Waals Layered Group-IV Monochalcogenides
Computational Study and Design of 2D MXenes for Applications Ranging from Metal-ion Batteries and Sensors to Membranes for Removal of Metal Ions
Computationally Guided Synthesis of MXenes by Dry Selective Extraction
Controlling the Growth of Wafer-scale 2D Materials: A Computational Framework for MOCVD Synthesis
Decoupling Acceleration Energy and Ion Effects in Defect Production through Ion Irradiation of Substrate Supported MoS2
Direct Ink Writing of Graphene Based Solutions for Gas and Water Sensing Applications
Electro-chemo-mechanics of Two-dimensional Materials-based Energy Storage Systems
Exploring the Remarkable Gas Sensing Capability of Molybdenum Diselenide Nanoparticles
Extensive Study of Graphene Growth Mechanism on Supported Cu Films Using Cold Wall CVD and Perspective on Growth Mechanism of Graphene From Scaling Functions of Graphene Island Size Distribution
Graphene as a Bioscaffold for Musculoskeletal Tissue Engineering
Graphene Based Protective Coatings
High-throughput Ab-Initio Study of 2D Janus-bulk Material Heterostructures for Photocatalysis
Investigation of MoS2-coated NITINOL60 for Triboelements in Ultra-High Vacuum Environments
Manufacturing and Characterization of Hybrid 2D Foams/ High-temperature Epoxy Nanocomposites
Mechanism of II-IV Semiconductor 2D Growth Facilitated by Crystallographic Anisotropy in Growth Kinetics in Wet Solution
Multifunctional Graphene Nanoplatelet (GNP) - Boron Nitride Nanoplatelet (BNNP) Hybrid Foam Sensors for Harsh Environments
MXene-Based Surface Coatings for Efficient Antiviral Air filtration
Novel 2D Materials Generated through LASiS
Optimization of the Ultrasound Liquid Phase Exfoliation of Graphite by MHz Synchrotron X-ray Imaging and Multiphysics Modelling
Processing and Performance of 2D- and 3D- sensor Materials
Processing of 2D Transition Metal Dichalcogenide Semiconductors: Electrical Contacts and Atomic Layer Deposition
Quantifying Thickness and Defects in 2D Materials
Radioluminescence Response and Catalytic Activity of Lanthanide-based Nanocomposites Upon X-ray Excitation
Stability of Pseudocapacitive Energy Storage in Ti3C2Tx MXene in a Wide Temperature Range
Strain Engineering of 2D van der Waals Materials for Nano-electronic and Quantum Devices
Structural Distortions and Optoelectronic Properties of Charged Point Defects and Dopants in 2D Materials
Study of Contact Metals to Transition Metal Dichalcogenides
Synthesis and Characterization of 2D WSe2 and Triple Cation Perovskite Based Photoabsorbers
Synthesis and Characterization of Q-carbon Layer Growth on 3D Nanostructures
Synthesis and Characterization of Q-silicon
Synthesis and Characterization of Selenides and Hybrid Halide Perovskites for Nanodevices
The Transverse Stiffness of Ti3C2Tx MXene and the Role of Inter-layer Water using Sub-angstrom Resolution Nanoindentation
Theory of Mechanical Exfoliation of van der Waals Layered Materials
Thermal Oxidation of Monolayer WS2
Two-Dimensional Solution-processed Tungsten Diselenide’s Response to Nitrogen Gas Flow
Two Dimensional Ferroelectric-based Catalysts for Enhanced CO2 Reduction
Uniaxial Strain-induced Stacking Order Change in Trilayer Graphene
Well-defined 3D Printing of Titanium Carbide (Ti3C2Tx) MXene Nanosheets into Complex and Hierarchical Microarchitectures with High Aspect Ratio

Questions about ProgramMaster? Contact