Conference Tools for 6th International Congress on 3D Materials Science (3DMS 2022)

Help

Submit An Abstract

Propose A Symposium

Presenter/Author Tools

Organizer/Editor Tools

About this Abstract

Meeting

6th International Congress on 3D Materials Science (3DMS 2022)

Symposium

6th International Congress on 3D Materials Science (3DMS 2022)

Presentation Title

Author(s)

On-Site Speaker (Planned)

Abstract Scope

Proceedings Inclusion?

Definite: Other

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

Ductile Damage UnderSshear Loading: Mechanisms Analysis Through In-situ Laminography Experiments for Dual-phase Steel and Aluminum Alloys

3D Aspects of Ice Compressive Failure During Ice-structure Interaction

3D Characterization of Damage in Spalled Tantalum

3D Characterization of Grain-scale Cyclic Twinning and Detwinning in Magnesium Alloys using High Energy X-ray Diffraction

3D Characterization of Inhalation Drug Formulations Using X-ray Microscopy

3D Mapping of Residual Stresses Using Synchrotron Micro-diffraction

3D Non-destructive Characterization of Electrical Steels for Quantitative Texture Analysis with Lab-based X-ray Diffraction Contrast Tomography (DCT).

3D Non-destructive Crystallographic Imaging of Peridotite with Lab-based X-ray Diffraction Contrast Tomography

3D Phase Formation of 2D Materials Embedded Lunar Regolith During Sintering

3D Strength Prediction of a Two-phase Material Using Two-point Statistics

4D Nanoscale Imaging of Powder Feedstock Processing for Additive Manufacturing

A High-fidelity Analytical Model for Multi-peak Bragg Coherent Diffraction Imaging of Compact Crystalline Domains

A Novel Approach for High-resolution Phase Analysis using Hybrid Machine Learning Segmentation of Multi-modal FIB-SEM Datasets and its Application for Analysis of Next Generation Wear-resistant Coatings

A Perspective on Serial Sectioning System Technology for Structural Materials Characterization

A Review on Emulsion Polymerization Based Synthesis, Fabrication and Photonic Application of 3D P(St-MMA-AA) Photonic Crystals

Achieving Large Volume Grain Statistics with Laboratory Based Diffraction Contrast Tomography

Alignment and Fusion of Multi-sensor Serial Section Data

Amorphous-crystalline Nanostructural Nd-Fe-B Permanent Magnets using Laser Powder Bed Fusion: Metallurgy and Magnetic Properties

Analysis of Fibers, Pores, and Mechanical Properties in µCT-scan of a Long Fiber-reinforced Thermoplastic

Application of 3D Characterization for Mechanical Modelling of Additively Manufactured AlSiMg

Application of a Laboratory-Based Multimodal X-ray Tomography to Study in 3D Correlations Between Grain Structure and Local Strain Distribution

Atomic-resolution 3D Analysis of Pt-Ru Alloy Nanoparticles by Electron Tomography

Automated 4D Reconstruction and Data-mining of Dislocation structures From In-situ TEM Experiments: Synthetic Training Data generation and Customized Deep Learning Strategies

Automated Serial-sectioning Method using Electrolytic Etching and Precision Cutting for 3D Microstructure Observation of Additively Manufactured Alloy 718

Buried Within: Targeted 3D Multiscale Imaging and Analysis in Bulk Samples

Calcium Oxalate Cluster Crystals Investigation of Ginseng Using Quantitative X-ray Micro-tomography

Calculating the Grain Boundary Inclination of Voxelated Grain Structures Using a Smoothing Algorithm

Casting Design Optimization using FEA Utilizing ICME Predicted Local Properties

Characterization of Microstructures and Deformation Mechanisms in Additively Manufactured 316L Stainless Steels

Combining Tomography and Scanning 3DXRD to Study Voids During Ductile Failure

Correlative Microscopy and Microstructural Characterization of Porosity Induced by Contouring in a Selective Laser Melted AA6061 Alloy

Correlative Microscopy: 3D EBSD with fs-Laser Plasma FIB-SEM

Corrosion of Nb-1% Zr-0.1% C Alloy in Lead-Bismuth Eutectic

Dark Field X-ray Microscopy

Deep Learning-Based 3D Damage Quantification for Natural Cellular Solids

Defect Interrogation in Additive Manufactured Inconel 738 Turbine Blades

Determination of Ligament Quality Factors in Additively Manufactured Lattice Structures Using In-situ Compression Testing Micro-CT

Development of 3D EBSD Serial Sectioning Workflows for Enhanced Local Orientation Analysis

Development of the Cube Component ({001}<100>) during Plane Strain Compression of Copper and its Importance in Recrystallization Nucleation

Dictionary and Spherical Indexing of EBSD Data Sets

Dual Energy XCT through Optimised Projection Fusion

Dynamic In-situ Imaging of Methane Hydrate Formation and Self-preservation in Porous Media

Eutectic Colony Evolution during Oscillatory Instability in Eutectic Solidification

Evaluation of an Improved Void Descriptor Function to Uniquely Characterize Three-dimensional Pore Networks and to Predict Failure Location in Additively Manufactured Metals

Examination of Dual Energy CT for Industrial X-ray

Fingerprints of Abnormal Grain Growth in a Three-Dimensional Microstructure

First Use of a Coded Aperture for Depth Resolved Scattering of a Pink Beam.

Formation of Three-phase Eutectic Grains on Primary Phases: Observations from Correlative Imaging

Full-field X-ray Nanoimaging Beamline at SSRF

Galaxy Framework for Next-generation Data Reduction Strategies at CHESS

Geometric Reconstruction and Volumetric Meshing Procedures for Mesoscale Level Finite Element Simulations

Global Local Modeling of Bead Formation and Geometry in Laser Bed Powder Melting Process Using a Comprehensive Multi-physics Simulation

Grain Boundary and Dislocation Structures in Metals Resolved by Transmission Electron Microscopy

Heat Transfer Modeling and Microstructure Evolution in Directed Energy Deposition Process for Al-0.5Sc-0.5Si Alloy

Helical Phyllotaxis and Conventional Laboratory Diffraction Contrast Tomography (LabDCT) Acquisition Strategies for Characterization of 3D Grain Orientations

Imaging Microplasticity Events by Combining High Energy Diffraction Microscopy and Bragg Coherent Diffraction Microscopy

Impact Mechanics Simulation of Laser Deposited High Entropy Alloys for Aerospace Applications

Implementing Nonlocal Ductile Damage into a Large Strain FFT-based Model for Predicting Failure in 3D Polycrystalline Materials

Implicit Geometrical Measurement of Grain Structures with a Phase Field Representation

Imposing Equilibrium on Measured 3-D Stress Fields Using Helmholtz Decomposition and FFT-based Optimization

In Operando 3D Characterization of Materials with Sub-15 nm Spatial Resolution Nano-tomography with the Transmission X-ray Microscope at APS

In Operando Multimodal and Multiscale Study of Degradation and Sodium Storage Process in Sodium-ion Batteries.

In Situ Heating for Laboratory-Based Nanoscale X-ray Microscopy

In Situ High Energy X-ray Diffraction Study of the Elastoplastic Transition in a Polycrystalline Metastable β Ti Alloy

Influence of Grain Boundary Energy Anisotropy on the Evolution of Grain Boundary Network Structure During 3D Anisotropic Grain Growth

Influence of Microtextured Regions on Early Plasticity in Ti64

Interpretation of Intragranular Strain Fields in High-energy Synchrotron X-ray Experiments via Finite Element Simulations and Analysis of Incompatible Deformation

Investigation of Grain Boundary Precipitation in Titanium Alloys using 3D FIB/SEM Tomography and 3D Phase Field Simulation

Investigation of Neutron-irradiated Microstructure of Fe-Cr System: A GPU Accelerated Phase-field Method

Investigation of Threshold Stress Level of Radially Reprecipitated Hydrides: A Phase-field Approach

Kinetic Pathway of Order-Order Transition in Diblock Copolymer by Time-resolved 3D Electron Microscopy

Laboratory X-ray Diffraction Contrast Tomography-improved Grain Mapping by Reconstruction with Magnified Diffraction Spots

Large Deformations of Metal Foams: Dynamic CT Results, Simulations, and Modeling

Liquid MetalJet X-ray Sources for High Resolution Characterization

Looking Deeper: A Realization of 3DXRD Microscopy with Enhanced Spatial Resolution

Machine-learning Model to Identify and Classify Dislocations in Aluminum via 3D Dark Field X-ray Microscopy

Machine Learning Framework for Spiking Defect Detection in Electron Beam Welding

Measurements of 3D Microstructures to Determine Grain Boundary Velocities in Polycrystal

Methods for Characterizing 3D Grain Boundary Network Structures: Tools from Spectral Graph Theory

Multimodal Investigation of Particle Stimulated Nucleation in Cold Rolled AA5182 Aluminum Alloy

Multiple Modal X-ray Microtomography for Material Science

Multiscale 3-dimensional Imaging and Modelling in Energy Materials Research

Multiscale Scattering Modeling from Deforming Titanium Alloy Polycrystals

New Insights in Materials Characterization – Spectral Computed Tomography

Noise, Sampling, and Phase: Understanding Spurious X-ray Signal

Novel tools to visualize 4D information at a glance: Flippoint Detection

Numerical Simulation for Prediction of Gas Porosity and Microstructure in Solidifying Aluminium Alloy Using LBM-CA (Cellular Automata) Model

Observing Bulk Plasticity in Ti-7Al by Topotomography

On the 3D Nature of Dislocation Lines and Core Structures in High Entropy Complex Alloys

Plateau-Rayleigh Instability with a Grain Boundary Twist

Porosity in L-PBF Additively Manufactured 316L

Pushing the Limits of HEDM / 3DXRD

Quantifying Microscale Drivers for Fatigue Failure via Coupled Synchrotron X-ray Characterization and Simulations

Quantitative Observation of Dendritic Growth in Metallic Alloys by Time-Resolve and In-situ Tomography

Recrystallization Boundary Migration in 3D

Reliable Semiconductor Die Attach Process with Ag/Sn/Ag Sandwich Structure

Residual Distortion Prediction through Fast Data Driven Model Approach in Additive Manufactured Components

Robust, Automated Analysis of Intragranular Heterogeneity

Searching for Life-limiting Localized Deformation in Inconel-718 using In-situ Cyclic Loading and High Energy X-rays

Study the Initiation of Hot Cracking Phenomenon During the Processes of Laser Welding

Sub-grain-level Fatigue Crack Growth Insights via High Energy X-ray Diffraction Microscopy

Sub-Second Three Dimensional Dynamic Imaging in Materials Application is Possible After the Relocation of X-ray Imaging Beamline at SSRF

Synergistic Nanoscale Precipitation in Austenitic Steels as Revealed by Atom-Probe Tomography

The Development of a Laboratory-scale High-energy Diffraction Microscopy Instrument

Thermal Microstructure Evolution of Deformed Mg Investigated in-situ by High-Energy Synchrotron Radiation

Towards Machine Learning-assisted Real-time Feedback and Guided Experiments

Tribeam Tomography of a Novel CoNi-superalloy for Laser Additive Processing

Understanding the Influence of Porosity and Defects on Mechanical Behavior in Additive Manufactured 316L Stainless Steel Using In-situ X-ray Computed Tomography

Uniting the Grain-scale Micromechanical and Intragranular Microstructural Response of a Titanium Alloy During Deformation Using High Energy X-ray Diffraction

Using Deep Learning to Reconstruct Grains from Simulated Far-field Diffraction Data

Virtual Indentation: Schematic Representation, Elementary Meshing, Material Models, Simulation Results

Visualizing and Analyzing 3D Dislocation Structures in Metals with Dark-field X-ray Microscopy

X-ray Microscopy Analysis of Functionally Graded SiC Particle Reinforced Aluminum Matrix Composites Using Dual-energy Tomography

Questions about ProgramMaster? Contact programming@programmaster.org | TMS Privacy Policy | Accessibility Statement