ProgramMaster Logo
Conference Tools for 2020 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Symposium
Meeting 2020 TMS Annual Meeting & Exhibition
Symposium 2020 Technical Division Student Poster Contest
Sponsorship TMS Extraction and Processing Division
TMS Functional Materials Division
TMS Light Metals Division
TMS Materials Processing and Manufacturing Division
TMS Structural Materials Division
Organizer(s) TMS Administration
Scope The five technical divisions of TMS are pleased to sponsor the student poster contest held each year at the TMS Annual Meeting & Exhibition. Both undergraduate and graduate students are encouraged to participate in this dynamic and interactive event.

Contest qualifications in addition to developing poster presentations of technical interest to individuals in the various technical divisions, participants must satisfy the following qualifications:

* Authors must be full-time students who are pursuing undergraduate or graduate degrees.

* Authors must register to attend the TMS Annual Meeting & Exhibition and be present to put-up and take-down the posters.

* Authors must be present during a scheduled “Exhibit Showing” (similar to a science fair) to answer questions and discuss their work.

* Each author may use up to a 114 cm x 114 cm (45” x 45”) space. If poster exceeds this space, it will be neither presented nor eligible for contest. (Authors are assigned display numbers prior to the conference to designate where presentations should be posted.)

* Visual aids that could clarify the results of your own work are encouraged. Do not, however, post your paper text. Graphics should be simple, colorful, well labeled and clear. The title should be written in letters 2 cm (3/4") to 5 cm (2") high, and all material should be readable from a distance of 2 m (6').

Indicate whether you are a graduate student or an undergraduate student as this is a requirement. Your abstract will be rejected if you do not complete this field.

YOU MAY SUBMIT TO ONE DIVISION ONLY!

Abstracts Due 12/03/2019
Proceedings Plan Undecided
PRESENTATIONS APPROVED FOR THIS SYMPOSIUM INCLUDE

SPG- 41: Evaluation of Two Novel Techniques to Characterize the Bond Strengths of Cold Sprayed Single Particle Impacts
SPG-11: Efficient Photoelectrochemical Water Oxidation by Graphene-decorated WO3/Nb:SrTiO3 Heterostructures
SPG-12: Electrical Characterization of Reduced Graphene Oxide According to Thermal Reduction
SPG-13: Healable Transparent Supramolecular Polymer Nanocomposites-based Energy Storage Device for Wearables and Robotics
SPG-14: High-temperature Oxidation Behavior of Al-Cr-Nb-Si-Zr Nitride Thin Films under Air Atmosphere Environment
SPG-15: Impact of Cryogenic Temperature Cycling on Single Solder Joint Shear Stability
SPG-16: Impact of Isothermal Aging on Single Solder Joint Shear: Cu Depletion Zone Effect
SPG-17: Imprinting of Ti35Zr15Ni35Cu15 Metallic Glass with Superelasticity by Changing the Thermoplastic Forming Process
SPG-18: Influence of Nanotube Loading on Self-healing Composites: Molecular Dynamics Study
SPG-19: In-Vitro Prediction of Material Performance of Central Venous Catheters (CVCs) Exposed In-Vivo
SPG-1: An X-ray Spectromicroscopy Study of the Calcium Mineralization in the JEB Tailings Management Facility at McClean Lake, Saskatchewan
SPG-20: Magnetic Activation of Ferromagnetic Fibre Network for Bone Regeneration
SPG-21: MgO-based ReRAM for Neuromorphic Computing
SPG-22: Microstructural Evolution of High (111)-oriented Nanotwinned Copper during Direct Bonding Process
SPG-24: Prevention of Crack Propagation in Fe-Ni Base Superalloy based on Spontaneous Precipitation of Metallic Boride
SPG-25: Structural and Electrochemical Properties of Na3V2(PO4)2F3 as Cathode Materials for Hybrid-ion Batteries using First Principles Calculation
SPG-26: Substrate Texture Dependent Graphene Growth on Cu Rich Cu-Ni Alloy Substrates
SPG-28: Thermopower Measurement of Graphene-based Materials
SPG-29: Comparing Traditional and Designer Alloy Feedstock Powders for Additive Manufacturing
SPG-30: Effect of Mechanical Milling and Cryomilling on Synthesis of CNT Reinforced 6082 Al Matrix Nanocomposites
SPG-31: Effect of Processing Parameters on Additively Manufactured WE43 Mg Alloy
SPG-32: Effects of Mg and Si Additions to Novel Al-Ce base Alloys for Aerospace Applications
SPG-33: Enhancement of Mechanical Properties by Large Strain Extrusion Machining of Aluminum Alloy
SPG-34: Impact of Cold Metal Transfer Arc Mode on Additive Manufactured Aluminum Alloy Multilayered Structure
SPG-36: An Investigation on Internal Oxidation of FeCrAlY Alloys in Selective Laser Melting
SPG-37: Automatically Quantifying Phase Information from HRTEM for Additively Manufactured Materials
SPG-39: Effect of Microtopography on Guided Cell Migration on a Graded Micropillar Substrate
SPG-3: Composition and Abrasiveness of Biomass Extrinsic and Intrinsic Inorganic Compounds
SPG-40: Elucidation of Solidification Kinetics in Laser Spot-fusion Processing of Ti-6Al-4V Alloy Using In-situ X-ray Synchrotron Radiography
SPG-42: Exploring the Structure-processing Relationship: Direct Ink Writing of Functionally Graded Carbides
SPG-44: Modeling and Predicting Longitudinal Defect Mechanisms in Steel Continuous Casting
SPG-45: Optimization of Heat-treatment on Recycled Stainless Steel Powder for Cold Spray Applications
SPG-46: Spark Plasma Sintering of Mechanically Alloyed In-situ Ni-Ti-C Nanocomposites
SPG-47:The Effect of TiC Content and SPS Processing Parameters on Ni-TiC Composites
SPG-49: Thermal Stability of Yttrium Oxide Nanoparticles in 304 ODS Alloy Additively Manufactured via Selective Laser Melting
SPG-4: Microwave Drying of a Nickel Laterite Ore
SPG-51: Understanding Thermal Signatures using Infrared Monitoring of Laser Powder Bed Fusion (L-PBF)
SPG-52: Atomistic Oxide Structures and Stoichiometry of Chromium Steel by Grand Canonical Monte Carlo Simulations with ReaxFF Potential
SPG-53: Deformation Mechanisms in Immm-Ni2(Cr,Mo,W)-containing Haynes® 244® Superalloy
SPG-54: Dependence of Crystallographic Orientation on the Microstructural Evolution of Ni-based Single Crystal Superalloys-A Synergistic Experimental-computational Analysis
SPG-55: Combinatorial and High-throughput Experiments on Ni-based Alloy Thin Films
SPG-56: Core Effect of Local Atomic Configuration and Design Principles in AlxCoCrFeNi High-entropy Alloys
SPG-57: Cycling Corrosion Testing of Bi-metallic Joints Between Al And Mg Alloys
SPG-58: Effect of Annealing and Partitioning Temperature of 10 wt pct. Mn steel in RT Q&P Process
SPG-59: Effect of Replacing Ni by Cu on Hydrogen Embrittlement in Austenitic Stainless Steel
SPG-5: Review of Coating Removal Techniques from Metal Substrates
SPG-60: Effects of Pore Geometry and Location on the Material Properties of Additively Manufactured Ti-64
SPG-61: Evaluation of the Magnitude and Directionality of Residual Stress on SUS316L using Instrumented Indentation Test
SPG-62: Experimental and Thermodynamic Modelling of Binary Phase Diagrams Under Pressure
SPG-63: Experimental Investigations and Thermodynamic Modeling of the Mo-Nb-Re Ternary System
SPG-64: First-principles Calculations of Non-dilute Solute Diffusion Coefficients in the Ag-Au System
SPG-65: Hydrogen Effect on 15Cr-15Mn-4Ni based Stable Austenitic Stainless Steels with Carbon or Nitrogen
SPG-66: Improvement on Anisotropy and Mechanical Behaviors of IN718 Processed by Selective Laser Melting by CoAl2O4 Inoculant Addition
SPG-67: In-situ Mechanical Characterization of Micro-scale NiTi Shape Memory Alloy Tensile Bars
SPG-68: Investigation into the Occurrence of Electromigration for Aluminum: Microstructure and In-situ XRD Study
SPG-70: Irradiation Cluster Defect Distribution on Fe Nanoparticle by MD Simulation
SPG-71: Kinetic Evolution of Metastable Grain Boundaries under Non-equilibrium Processing
SPG-72: Mechanical Behavior of NiTi Shape Memory Alloy Thin Films
SPG-73: Mechanical, Electrical, and Structural Properties of Combinatorially Synthesized W-based Alloy Thin Films under Helium Irradiation
SPG-74: Microstructural and Plastic Deformation Study of a TRIP Dual-phase High-entropy Alloy Fe50Mn30Co10Cr10
SPG-75: Negative Poisson’s Ratio in Heusler-type Cu-Al-Mn-based Shape Memory Alloys
SPG-7: A Novel Zinc Oxide (ZnO) Nanostructured Layer Coated onto Medical Grade Polyurethane for Controlled Surface Degradation
SPG-8: Additive Manufacturing of Transparent, Stretchable and Strain-insensitive Touch Sensing Matrix
SPG-9: An Ab Initio Study on the Development of Co-free Layered Oxides as Cathode Materials in Li-ion Batteries
SPU-10: An In-situ X-ray Synchrotron Radiography Approach to Relating Melt-strategy Parameters to Solidification Dynamics in Laser Fusion Processing of Ti-6Al-4V
SPU-11: Designing Microscale Tests to Validate the Macroscale Plastic Response in Lightweight Aluminum and Magnesium
SPU-12: Embrittlement of Fe-based FINEMET Ribbons
SPU-13: Impact of Surfactant Concentration and Type on Bilge Water Emulsions During Static and Dynamic Ageing
SPU-14: Low Density, High-temperature Syntactic Foam for Additive Manufacturing
SPU-15: Overcoming Oxidation of CMSX-4 to Determine the Thermophysical Properties in the Liquid State
SPU-17: Computational Indicators of Ductility in Compositionally-complex B2 Alloys
SPU-18: Design of a Novel Complex Concentrated Alloy for Orthopedic Implant Applications
SPU-19: Elimination of the Sigma Phase in a Compositionally Complex Fe-Cr-based System
SPU-1: Development of an All Solid- state Printed Carbon Electrode Utilizing Nickel Oxide/oxyhydroxide for Phosphate Detection
SPU-21: Strengthening Mechanisms of Ultra-strong Fe-Zr Solid Solution Alloys
SPU-2: Electrochromic Phase Transition in Sn-based Mixed Halide Perovskite
SPU-4: Facile Route to Fabricate Binder Free Ni(OH)2/RGO Core-shell Structure for Supercapacitors
SPU-6: Surface, Interface, and Temperature Effects on the Phase Separation and Nanoparticle Self Assembly of Bi-Metallic Ni0.5Ag0.5: A Molecular Dynamics Study
SPU-7: Corrosion Study on the Al-Ce Eutectic Alloys in NaOH and HCl Aqueous Solutions
SPU-8: Effect of Thermomagnetic Processing on the Properties and Microstructure of Aluminum Alloys
SPU-9: Effects of Mg+Si Additions on the Microstructure and Mechanical Properties of Al-Ce-Sr based Alloys


Questions about ProgramMaster? Contact programming@programmaster.org