ProgramMaster Logo
Conference Tools for 2nd International Conference on Technological Innovations in Metals Engineering (TIME)
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Symposium
Meeting 2nd International Conference on Technological Innovations in Metals Engineering (TIME)
Symposium Technological Innovations in Metals Engineering (TIME)
Organizer(s) Brett P. Conner
Jason Walker, Youngstown State University
Shai Essel, Technion Israel Institute of Technology
Scope The conference welcomes participants with interests in applied research, technology development, technology transition and implementation in metals engineering with emphasis on innovations relevant to the metals industry. Key topics of interest for TIME 2020 are:

- Additive manufacturing
- Metals processing through shaping, forming, and solidification
- Alloys and critical materials
- Applications
- Industry 4.0 in Metals Engineering: Robotics, IoT, AI/ML, and Automation

Within these topic areas, presentations are sought that involve the full range of metals innovations and technologies including: metals processing, characterization, in situ monitoring, alloy and temper development, non-destructive evaluation, process planning, and modeling & simulation.
Abstracts Due 12/09/2019
Proceedings Plan Undecided
PRESENTATIONS APPROVED FOR THIS SYMPOSIUM INCLUDE

Accelerated Development of Aerospace Structures with Generative Design and Additive Manufacturing
Accelerated Development of Substitutes for Critical Rare-earth Permanent Magnets
Additive Manufacturing for Metalcasting: Lessons Learned in Accelerating Technology Transition
Additive Manufacturing of Nickel-titanium Shape Memory Alloys: Fabrication and Characterization with Focus on Surface Finishing
Advances in and Impacts of High-performance Metals Research and Development for Fossil Energy
An America Makes Perspective on Metal Additive Manufacturing Successes, Lessons Learned, and Future Opportunities
An Investigation into the Relation of Sensor Signals to Physical Build Conditions
Applications of Hybrid Aluminium: Composites, Foams, Sandwiches
Atomic Force Microscope-based Meniscus-confined Three-dimensional Electrodeposition
Binder Jetting 3D Printing of Magnetron Sputtering Metallic Targets
Characterization of Corrosion in Stainless Steel Percutaneous Leads Used in Neuromodulation Applications
Characterization of Micro-hardness, Corrosion Resistance and Microstructure of an Induction Heated Friction Stir Welded AISI 410 Stainless Steel
Comparative Microstructure Study of 3D Printed and Casted Copper Metal
Compliance Modeling of 3D Printed Materials for Metalforming Tooling
Effects of Various Levels of Powder Contamination in AlSi10Mg and Three Corrosive Environments
Fracture and Fatigue Crack Behavior of Selective Laser Melted AlSi10Mg with Systematically Induced Defects
Gas Atomization Processing Research to Increase Powder Quality and Yields for Additive Manufacturing
High Mix, Low Volume, No Problem: The Intersection of Blacksmithing and Industry 4.0
High Speed Stereovision In-situ Monitoring of Spatter During Laser Powder Bed Fusion
HIP and Heat Treatment of Laser Powder Bed Fusion AlSi10Mg
Hybrid-additive Manufacturing of Tool Components: Investigation of Mechanical Properties and Simulative Design of the Laser Metal Deposition Process
Hybrid Additive Manufacturing via Selective Laser Melting and Electron Beam Melting
Hybrid Manufacturing Produced Metal Structures with Embedded Strain Sensing
Hybrid Multi-axis WAAM/milling on a Parallel Kinematic Setup Outside of the PA Position
In-situ Monitoring to Determine the Effect of Geometry on Internal Defects in Additive Manufacturing
Innovations in Lost Foam & Evaporative Casting
Integrating Additive Manufacturing into the Sand Casting Process to Improve Its Efficiency and Quality
Interaction between Additive Manufacturing Defects in AlSi10Mg and Three Corrosive Environments
Machining Behavior and Microstructure in Additive Manufacturing Ti-6Al-4V
Machining of Fe17Cr2Ni0.2C Thermally Sprayed Iron Based Coatings by Turning
Mechanical and Physical Properties of Additively Manufactured and Capillary Infiltrated RB SiC/SiC Composites
Mechanical Properties of 3D Printed Ni-Mn-Ga Magnetic Shape Memory Alloy
Microstructural and Tensile Properties of AlCrFe2Ni2 High Entropy Alloy (HEA)
Microstructural Comparison of SEBM - Printed and Cast Al0.5CrMoNbTa0.5 Alloy
Microstructure and Mechanical Properties Investigation of 3D Printed Tungsten
Modelling and Simulation Approach for the Development of Advanced Materials
Novel Heat Treatment Technology for Increasing Impact Strength of Bulk Grey Cast Irons
One Step Synthesis for Multilayered Structures Using Tube High Pressure Shearing (t-HPS)
Optimization of Parameters for the Additive Manufacturing of GRCop
Plasma Electrolytic Polishing for Post-processing of AM Parts
Pulsed Electrochemical Machining of Blind Hole Internal Gears for High Torque Transmission
Resistance of Mesostructural Functionally Graded Material Fabricated through Additive Manufacturing to Impact
Roles for Machine Learning in Materials Science and Engineering
ShAPE™: A Different Approach to the Extrusion of High-Performance Alloys
Structural Comparative Study of Hydrogen Effects on Electrochemically Charged Additive Manufactured by Electron Beam Melting (EBM) and Wrought Ti-6Al-4V Alloys
Systematic Generation of Lack of Fusion Defects for Effects of Defect Studies in Laser Powder Bed Fusion AlSi10Mg
The Dynamic Properties of Advanced Magnesium Alloys
Thermal Diffusion Galvanizing of Steel and Cast Iron Products in a Fluidized Bed Powder Mix with Direct Induction Heating


Questions about ProgramMaster? Contact programming@programmaster.org