ProgramMaster Logo
Conference Tools for 2024 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2024 TMS Annual Meeting & Exhibition
Symposium Environmental Degradation of Multiple Principal Component Materials
Presentation Title Comparison of Initial-stage High Temperature Oxidation Behavior of MCrAlY and Hf-Y Co-doped CoCrFeNiAl Complex-concentrated Alloy in Wet Air
Author(s) Tian-Wei Lu, Xing-Ru Tan, Michael C. Gao, Shan-Shan Hu
On-Site Speaker (Planned) Tian-Wei Lu
Abstract Scope The replacement of natural gas by hydrogen in turbine system would offer greater energy efficiency but might impair the performance current MCrAlY bond coat due to higher flame temperature and water vapor. To address this issue, a new Hf-Y co-doped CoCrFeNiAl complex-concentrated alloy (CCA) has been developed as a promising substitute. In this work, the early stage (0-150 h) oxidation behavior of this novel CCA along with the state-of-art MCrAlY at 1150 ℃ with wet air has been investigated through isothermal oxidation tests. Post-mortem analysis including XRD, SEM and EDS has been conducted to explain the mechanism of outstanding oxidation resistance of this CCA, thus providing suggestions for developing the next generation bond coat materials.
Proceedings Inclusion? Planned:
Keywords High-Entropy Alloys, Environmental Effects, High-Temperature Materials

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

Accelerating the Design and Discovery of Tribocorrosion-resistant Metals by Interfacing Multiphysics Modeling With Machine Learning and Genetic Algorithms
Advanced Studies of Radiation Damage in Compositionally Complex Alloys
Aloe Saponaria Gel as a Green Corrosion Inhibitor of Carbon Steel in an Acid Médium
B-1: A High Throughput CALPHAD Method of Designing Low Density, Compositionally-complex Alloys Toward Understanding Lightweighting Elements' Effects on Passivity
B-2: Elemental Affinity Engineering for Improving Hydrogen Embrittlement in CoCrFeNiV High-entropy Alloys
B-3: High Temperature Oxidation of HEAs and NC-strengthened HEAs in Presence of Water Vapor
B-4: Investigation of Mechanical Stress and B10 Exposure on FKM Polymer
Behavior in Cooling–induced Oxide Scale Spallation of Original and Modified Cantor’s HEA Alloys Oxidized at High Temperature
Bottom-up versus Top-down Oxide Scale Design in Refractory High Entropy Alloys
Combinatorial Synthesis of Non-equiatomic CrMoNbTaW With Improved Strength and Oxidation Resistance
Comparison of Initial-stage High Temperature Oxidation Behavior of MCrAlY and Hf-Y Co-doped CoCrFeNiAl Complex-concentrated Alloy in Wet Air
Corrosion Resistance of 316L Stainless Steel in Hydrochloric Acid
Cracking the Code: Demystifying Early-stage Oxidation in High Entropy Alloys
Deformation Behavior of High Entropy Alloys as a Function of Strain Rate and Temperature
Development of Novel Light Refractory High Entropy Alloys for High Energy Accelerator Windows
Effects of Varying Al Content on the Microstructure of the Fe-Cr-Ni-Mn-Al Multi-component Alloy System
Environmental Degradation of Polymer-based Composite Materials: Challenges and Mitigation Strategies
Environmental Impact of Multi-component Fiber-reinforced Composites: Challenges and Green Solutions
Evaluation of a Nb-Si-Ti-Al-Hf Alloy as a Bond Coat for Nb-based Alloys
Exploring the Synergy of Al-Cr in Aqueous Passivation of [FeCoNi]CrxAly Compositionally Complex Alloys (CCAs) Across Cr Threshold Concentrations
High-Entropy Alloys Corrosion Behaviors
High Entropy Alloys for Advanced Modular Reactors
Impaired Repassivation Kinetics of Multi-principal Element Alloy Surfaces Caused by Selective Oxidation and Nickel Enrichment
Initial Hot Corrosion Behavior of Graded Composition Transition Joints and Dissimilar Metal Weldments of P91&304 under Molten Sulfate Salts
Insights into Defects and Failure of Multi-component Ultra-high Temperature Carbides
Insights on the Oxidation Behavior of Refractory High Entropy Alloys
Irradiation and Oxidation Behavior of Multi-principal Element Alloys Manufactured by Different Techniques
Isothermal High Temperature Oxidation of Cantor’s–based MC–reinforced HEAs Versus Their Mn and Cr Contents
Orientation Dependency of Hydrogen-induced Cracks in Single-crystalline CrCoNi Medium-entropy Alloy
Oxidation of NiCoCr Alloys in High Temperature Air and Steam Environments
Simulations of Chloride on Hydroxylated Passive Oxide Surfaces Related to Localized Corrosion Initialization
Some Effects of Hydrogen on the CoCrFeMnNi Alloy
Study of the Corrosive Effect of Enzymatic, Multi-enzymatic, and Sodium Hypochlorite Solutions on Surgical-grade Stainless Steel Instruments Used in the Operating Room Area of the Clinical Hospital
Utilizing Small Punch Test (SPT) for Mechanical Behaviour Study of Electrochemically and Gaseous Hydrogenated Electron Beam Melting (EBM) and Wrought Ti–6Al–4V
Wear Behavior of Multi-component Ultra-high Temperature Carbides

Questions about ProgramMaster? Contact programming@programmaster.org