ProgramMaster Logo
Conference Tools for 2024 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2024 TMS Annual Meeting & Exhibition
Symposium Environmental Degradation of Multiple Principal Component Materials
Presentation Title Aloe Saponaria Gel as a Green Corrosion Inhibitor of Carbon Steel in an Acid Médium
Author(s) Flavia Schmidt, Alicia Esther Ares, Claudia Marcela Méndez
On-Site Speaker (Planned) Alicia Esther Ares
Abstract Scope Chemical inhibitors play an important role in protection and mitigation strategies to retard corrosion, however, their use can cause negative effects on the environment. Due to this, the use of plant extracts as corrosion inhibitors has been suggested since they are non-toxic, biodegradable and abundant in nature. Aloe Saponaria gel was used as a green corrosion inhibitor of carbon steel in 0.5 M HCl acid medium. The corrosion inhibition performance was investigated by electrochemical impedance and potentiodynamic polarization in the absence and presence of the inhibitor, in different concentrations (10, 20, 30% v/v), at the following temperatures: 298, 308, 315 and 323 K. The trend is observed that the higher the inhibitor concentration, the lower the corrosion rate, this is due to the adsorption of organic matter creating a cover on the surface of the steel.
Proceedings Inclusion? Planned:
Keywords Iron and Steel, Characterization, Other

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

Accelerating the Design and Discovery of Tribocorrosion-resistant Metals by Interfacing Multiphysics Modeling With Machine Learning and Genetic Algorithms
Advanced Studies of Radiation Damage in Compositionally Complex Alloys
Aloe Saponaria Gel as a Green Corrosion Inhibitor of Carbon Steel in an Acid Médium
B-1: A High Throughput CALPHAD Method of Designing Low Density, Compositionally-complex Alloys Toward Understanding Lightweighting Elements' Effects on Passivity
B-2: Elemental Affinity Engineering for Improving Hydrogen Embrittlement in CoCrFeNiV High-entropy Alloys
B-3: High Temperature Oxidation of HEAs and NC-strengthened HEAs in Presence of Water Vapor
B-4: Investigation of Mechanical Stress and B10 Exposure on FKM Polymer
Behavior in Cooling–induced Oxide Scale Spallation of Original and Modified Cantor’s HEA Alloys Oxidized at High Temperature
Bottom-up versus Top-down Oxide Scale Design in Refractory High Entropy Alloys
Combinatorial Synthesis of Non-equiatomic CrMoNbTaW With Improved Strength and Oxidation Resistance
Comparison of Initial-stage High Temperature Oxidation Behavior of MCrAlY and Hf-Y Co-doped CoCrFeNiAl Complex-concentrated Alloy in Wet Air
Corrosion Resistance of 316L Stainless Steel in Hydrochloric Acid
Cracking the Code: Demystifying Early-stage Oxidation in High Entropy Alloys
Deformation Behavior of High Entropy Alloys as a Function of Strain Rate and Temperature
Development of Novel Light Refractory High Entropy Alloys for High Energy Accelerator Windows
Effects of Varying Al Content on the Microstructure of the Fe-Cr-Ni-Mn-Al Multi-component Alloy System
Environmental Degradation of Polymer-based Composite Materials: Challenges and Mitigation Strategies
Environmental Impact of Multi-component Fiber-reinforced Composites: Challenges and Green Solutions
Evaluation of a Nb-Si-Ti-Al-Hf Alloy as a Bond Coat for Nb-based Alloys
Exploring the Synergy of Al-Cr in Aqueous Passivation of [FeCoNi]CrxAly Compositionally Complex Alloys (CCAs) Across Cr Threshold Concentrations
High-Entropy Alloys Corrosion Behaviors
High Entropy Alloys for Advanced Modular Reactors
Impaired Repassivation Kinetics of Multi-principal Element Alloy Surfaces Caused by Selective Oxidation and Nickel Enrichment
Initial Hot Corrosion Behavior of Graded Composition Transition Joints and Dissimilar Metal Weldments of P91&304 under Molten Sulfate Salts
Insights into Defects and Failure of Multi-component Ultra-high Temperature Carbides
Insights on the Oxidation Behavior of Refractory High Entropy Alloys
Irradiation and Oxidation Behavior of Multi-principal Element Alloys Manufactured by Different Techniques
Isothermal High Temperature Oxidation of Cantor’s–based MC–reinforced HEAs Versus Their Mn and Cr Contents
Orientation Dependency of Hydrogen-induced Cracks in Single-crystalline CrCoNi Medium-entropy Alloy
Oxidation of NiCoCr Alloys in High Temperature Air and Steam Environments
Simulations of Chloride on Hydroxylated Passive Oxide Surfaces Related to Localized Corrosion Initialization
Some Effects of Hydrogen on the CoCrFeMnNi Alloy
Study of the Corrosive Effect of Enzymatic, Multi-enzymatic, and Sodium Hypochlorite Solutions on Surgical-grade Stainless Steel Instruments Used in the Operating Room Area of the Clinical Hospital
Utilizing Small Punch Test (SPT) for Mechanical Behaviour Study of Electrochemically and Gaseous Hydrogenated Electron Beam Melting (EBM) and Wrought Ti–6Al–4V
Wear Behavior of Multi-component Ultra-high Temperature Carbides

Questions about ProgramMaster? Contact programming@programmaster.org