Additive Manufacturing of Polymer Matrix Composites With Natural Fibers

Analysis of the Incorporation of Industrial Granite Waste in an Epoxy Matrix on Compression Performance

Artificial Marble From Waste Recycling: Physical and Mechanical Characterization

Assessment of the Tensile and Thermal Properties of Recycled Waste Plastics Composites

C-6: Influence of Addition Waste Aluminum III Oxide on Mechanical and Thermal Properties of Concrete Glass Composite

Cellulose Derived From Banana Peels

Characterization of a Novel Eco-friendly Polymeric Composites Based in Casuarina Powder

Characterization of Polymeric Composites for Piping Repair by Mechanical Testing

Characterization of Ramie Fiber for Polymeric Composties to be Used in High Performance Bikes

Coaxial Layered Carbon Fibers of PAN/Glass Fibers via Dry-jet Wet Spinning Process

Comparative Analysis of Flexural Resistance of Epoxyde Composites Reinforced With Acai Fiber Powder

Design and Characterization of Kevlar/Epoxy Composites Infused with Silicon Carbide (SiC) - Zinc Oxide (ZnO) Nanofillers

Development and Characterization of Bio-epoxy by Cardanol for Polymeric Composites

Development of Eco-friendly Composite for High-performance Flooring by Coffee Grounds Waste

Development of Hard Coating Based in Eucalyptus Sawdust Waste in a Polymeric Composites

Effect of Plasma Low Temperature Plasma on Waste Carbon Fiber for Effective Recycling

Enhancing the Physico-mechanical Properties of Clay Bricks Using Snail Shell Ash as a Sustainable Building Material

Epoxy Matrix Reinforced With Kaolin for Production New Building Materials

Evaluation of Hard Polymeric Composites Coating Based in Granite Powder Waste

High Ampacity Aluminum-graphene Wires for Overhead Conductor Applications

Impact Evaluation of Corn Husk Reinforced Epoxy Composites

Influence of Car Glass Addition as a Replacement of Natural Aggregate on Mechanical and Thermal Properties of Concrete

Influence of the Use of Anti-bubble Additives on the Permeability and Porosity of Anticorrosive Coatings

Inhibition Performance of Snail Shell Nanoparticle Extract as a Sustainable Ecofriendly Inhibitor for API 5L X65 Pipeline Steel Corrosion Towards Acid Activation Environment.

Magnetization of Al-based Alloys by Shear-assisted Solid Phase Processing

Material Developments for 3D/4D Additive Manufacturing (AM) Technologies

Mechanical Characterization of Polymeric Composites Reinforced by Thin Fique Fabric

Multi-walled Carbon Nanotubes and Graphene Oxide Decorated Pitch-derived Carbon Foam Composites for Enhanced Structural and Catalytic Performances

Nanocomposite Materials for Radionuclide Sequestration from Groundwater Environments

Nanoparticle Reinforced Lightweight Metal Composites and Their Characterisation: A Summary

New Circular, Sustainable Building Composite Material Made of Building Wastes

Photocatalytic Nitrate Destruction Studies in Complex Environments

Plastics-to-Carbons: Transforming Plastic Waste Into Diverse Morphologies

Recovery of Vanadium (IV) from Leaching Solution Using Fe-MOF Material

Recycling, Reuse and Conformed of Acrylonitrile Butadiene Styrene (ABS) From Weee Waste

Removal of Cr(III) Ions from Simulated Hydrometallurgical Wastewater by Fe-MOF

Stabilization of Aluminum Dross by Coating With PEG

Study of the Impact Behavior of Epoxy Matrix Composites With Granite Waste

Study on the Adsorption of Selenium-containing Wastewater by MIL-101-NH2

Synthesis and Characterization of Superabsorbent Polymer Hydrogels Containing Silicate Precursors to Internally Cure and Strengthen Cement

Technical Route to Develop High Tg Epoxy Composite That is Water Degradable at Low Temperature

Verification of the Tensile Strength of Polyester Matrix Laminated Composites Reinforced With Raffia, Jute and Glass Fibers

Questions about ProgramMaster? Contact programming@programmaster.org