ProgramMaster Logo
Conference Tools for 2022 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2022 TMS Annual Meeting & Exhibition
Symposium Advanced Characterization Techniques for Quantifying and Modeling Deformation
Presentation Title Modeling and Experimental Characterization of Intragranular Residual Stresses, Statistically Stored and Geometrically Necessary Dislocations
Author(s) Ritwik Bandyopadhyay, Sven E. Gustafson, Hemant Sharma, Peter Kenesei, Michael D. Sangid
On-Site Speaker (Planned) Ritwik Bandyopadhyay
Abstract Scope Residual stress, defined as long-range internal stress inside a solid in the absence of externally applied load, is present in all engineering materials. In crystalline solids, such stress primarily exists due to defects (e.g., point defects, dislocations and dislocation structures, precipitates, grain boundaries) and can influence the performance of structural components. However, there are limited methods to initialize intragranular residual stress and dislocation densities in crystal plasticity models. This research lays out a mathematical framework to compute statistically stored and geometrically necessary dislocations and their contributions to intragranular residual stress. We test the efficacy of the framework using near-field and far-field high-energy x-ray microscopy experimental data for Ti-7Al. Good agreement between model prediction and experimental observations adds trust to our formulation. The proposed framework offers a path to better characterize structure-performance relationships in designing materials using an integrated computational materials engineering (ICME) approach.
Proceedings Inclusion? Planned:
Keywords Other, Other, Other

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

3D Orientation and Strain Mapping of Recrystallization and Micro-texture Development in Heavily Deformed Ferritic Alloys
A 3D Microstructure Evaluation Tool for Interface Statistics: An Application to Deformation Twins
A Thermo-elasto-viscoplastic Finite Element Model to Study Polycrystalline Evolution during Metal AM
A Thermo-mechanical Model for Dislocation Dynamics in Transient Heterogeneous Temperature Fields
Accessing Order-dependent Defect Distributions Using Novel Diffraction Techniques
Advanced Characterization of Mock High Explosive
An Atomistic-to-microscale Computational Analysis of the Dislocation-interface Reaction and the Subsequent Structure Changes in Two-phase Materials under Compression and Shear
Analysis of RVE Size Based on Slip Activity Using Far-field HEDM Data
Applications of an Efficient Elasto-visco-plastic Self-consistent Polycrystal Model Interfaced with a Finite Element Framework
Applications of Direct Detection for EBSD Analysis of Deformed Materials
Capturing Deformation Mechanisms in Additively Manufactured Parts through High-fidelity Modeling and In Situ Computed Tomography
Centimeter to Nanometer Materials Characterization Informed Phase Field Modeling of Mechanical Failure in 6022/EK100 Linear Friction Stir Welds
Characterization of Heat-resistant Steels and Alloys for Life-prediction Modeling
Characterization of Microstructure Evolution and Micromechanics Behavior of Steels with Metastable Austenite during Uniaxial Tensile Loading
Considering the Impact of Anisotropy on Microcracking in Brittle Materials Using the Phase Field Fracture Model
Cores of 1/2<110>-type Dislocations in the CrMnFeCoNi High-entropy Alloy Investigated by STEM, the Center of Symmetry and the Nye Tensor Mapping Techniques
Coupling In-situ SEM Experiments with Acoustic Emission to Unravel the Underlying Deformation Mechanism in Metals
Crystal Plasticity Finite Element Simulation of Microstructural Deformation in Ultra-thin Ferritic Steel Sheet
Dominant Microstructural Features Impacting Failure in Additively Manufactured AlSi10Mg
Enhanced Predictive Modelling of Laser Weld Failure Using 3D Characterization of 304L
Estimation of Micro-Hall-Petch Coefficients in Mg-4Al as a Function of Grain Boundary Parameters
Evolution of Sigma Phases in 347H Stainless Steels Subjected to Isothermal Aging at 750 oC
Experimental Characterization and Explicit Slip Band Micromechanical Modeling of Slip Localization in FCC and HCP Metals
Exploring Nanoscale Fatigue through Coupled In-situ Microscopy and Modeling
Full Field Crystal Plasticity Simulations of Measured Microstructures: Going 3D
Fundamental Deformation Mechanisms in Metals with Gradient Structure and Multi-principal Element Alloys
Grain Environment Dependent Deformation Twinning in a TWIP Steel: A 3DXRD Study
High Temperature In Situ TEM Based Nanomechanical Testing
Identification of Crystal Plasticity Model Parameters by Multi-objective Optimization Integrating Texture Evolution
Imaging Defects and Their Dynamics Using Scanning Electron Microscopy Approaches
Improving 2D Diffraction Peak Detection Using Shannon Entropy
In Situ Study of Kink Banding in Cu/Nb Nanolaminates
Investigation of Dislocation Structures in an Al-Li Binary Alloy via High Resolution X-ray Characterization Techniques
Investigation of Grain Size Effects on Cyclic Deformation and Twinning in Magnesium Alloys by High Energy X-ray Diffraction
Investigation of the Microstructure and Plastic Deformation of AM 316L Stainless Steels
Line Profile Analysis from In Situ Synchrotron X-ray Diffraction to Study the Microstructural Evolution during Elasto-plastic Transition in Nickel with Bimodal Grain Structure
Local Phase Transformation at Microtwins and Planar Defects in Creep Deformed Ni-Base Superalloys
Low kV EBSD & Physics-based Modeling of Dislocation Cell Structures in Aluminum
Martensitic Transformation-mediated Twin Nucleation in Hexagonal Close Packed Metals
Meso-scale Characterization and Strain-gradient Enabled Simulation of the Multi-strain Path Deformation of AA6016-T4
Modeling and Experimental Characterization of Intragranular Residual Stresses, Statistically Stored and Geometrically Necessary Dislocations
Multiscale Characterization of Metallic Alloy Microstructures and Links to Properties
NOW ON-DEMAND ONLY – Exploring Plastic Deformation and Color of Metals with Mathematical Morphology
NOW ON-DEMAND ONLY – Modeling Precipitation in Alloy 347H for the XMAT Project
NOW ON-DEMAND ONLY – The Effects of Precipitates on Twinning in Mg Alloys
On the Correlation between Plastic Strain and Misorientation in Polycrystalline Body-centered-cubic Titanium Alloys: An Experimentally and Numerically Study
Prismatic Slip Induced Interface Sliding in Alpha/Beta Titanium Alloys
Quantifying Damage Evolution during In-situ Loading of Additive Manufactured 316L Stainless Steel Using High Energy X-rays
Recent Advances and Applications of Lab-based Diffraction Contrast Tomography
Role of Misorientation on Grain Boundary Sliding through High-resolution Digital Image Correlation
Significant Disparity of Deformation Behavior in Hot-rolled Highly-textured Mg and Mg-3Al-1Zn Alloy under Tension
Statistical Analysis of Forward and Lateral Transmission of Twins Across Grain Boundaries in HCP Magnesium
Strain Accommodation Mechanisms in the Near Alpha Ti-6Al-2Sn-4Zr-2Mo Alloy Studied Using Experiments and Simulations
Strain Rate Dependent Deformation and In-situ TEM Crystallization in Crystalline/Amorphous Ni-Zr Thin Films
Study of Microstructure Evolution due to Solid-state Thermal Cycling during AM via Laser-integrated Scanning Electron Microscopy
The Early Stage of Deformation-induced Dislocation Patterning Studied by DFXM
The Role of GNDs in Memory Response of FCC and BCC Metals during Deformation
Time Resolved Evolution of the 3D Nanoporous Structure of Sintered Ag by X-ray Nanotomography: Role of the Interface with a Copper Substrate
Use of Spherical Nanoindentation Protocols to Study the Anisotropic Mechanical Response of α-β Single Colonies in Ti-6Al-4V Alloy

Questions about ProgramMaster? Contact programming@programmaster.org