SPG-10: Effects of Grain Growth Mechanisms in Cu-based Alloy Thin Films for Low Resistivity

SPG-11: Engineering and Testing of Perovskite Solar Devices for Use on the Lunar Surface

SPG-12: GenMG: A Tool for Predicting Novel Metallic Glasses with Application-specific Properties

SPG-13: In-situ Nucleation of MOF on Glass Fiber Surface: Investigating MOF Loading Effects and Electrochemical Performance

SPG-14: Liquid/Solid Interfacial Reactions between Lead-free Solders and the Cu-Ni-Si-Mg Alloy(C7025)

SPG-15: Mechanistic Investigation of Twinned Copper Nanowires as a Multi-functional Materials

SPG-16: Novel SolidStir Extrusion Technology for Enhanced Conductivity Cable Manufacturing via In-situ Exfoliation of Graphite to Graphene

SPG-17: Tailoring the Performance of the LiNi0.8Mn0.1Co0.1O2 Cathode using Al2O3 and MoO3 Artificial Cathode Electrolyte Interphase (CEI) Layers through Plasma-enhanced Atomic Layer Deposition (PEALD) Coating

SPG-18: Effect of Silicon Content on the Microstructure and Mechanical Properties of Aluminum-Cerium Based Alloys

SPG-19: Exploring High-temperature 7000 Series Aluminum Alloys: High-throughput DFT Calculations and Machine Learning Approaches

SPG-1: Diffusion Bonding of Titanium Alloys and Magnesium Alloys

SPG-20: Improving the Joint Strength of Ultrasonic Welded Mg/Al Joints by Insetting a Third Element Foil

SPG-21: Modification of Twinning Behavior in Mg Alloys by Grain Boundary Intermetallic Particles

SPG-22: 3D Printed Stretchable Soft Electronics with Metamaterials-inspired Electromagnetic Architecture

SPG-23: Understanding the Microstructure Evolution in the Selective Laser Melted Near-alpha Ti-6Al-2Sn-4Zr-2Mo Alloy using Advanced Characterization Techniques

SPG-24: Variations in Microstructural Characteristics and Mechanical Properties of High-speed-extruded Mg-Bi Alloys through Al Addition

SPG-25: A Comparative Study of Nitrogen Gas Purity for Cold Spray Applications: Bottled vs. Generated Nitrogen

SPG-26: A Comparison of the Generalizability of Machine Learning and Constitutive Modeling Approaches for the Prediction of Flow Stress

SPG-27: Additive Manufacturing of CrCoMnFeNi via Novel Polymer-powder Composite

SPG-28: Additively Manufactured Niobium C103 via Laser-directed Energy Deposition: Fabrication Process, Microstructure Evolution, and Mechanical Behavior

SPG-29: Characterization of Microstructural Heterogeneities in EBM-PBF Haynes 282 using Linear and Random Scan Strategies

SPG-30: Controlling the Pre-bending Delay during Laser Sheet Metal Forming

SPG-31: Data-Driven Optimization of Wire Arc Directed Energy Deposition Manufacturing Conditions for Improved Bead Shape Prediction

SPG-32: Design and Tailoring of a Novel High-entropy Alloy for Additive Manufacturing

SPG-33: Development of a Low-cost Open-source Wire Arc Additive Manufacturing (WAAM) Machine

SPG-34: Effect of Fastener Hole Repair on High-strength Aluminum Alloy Plates via Additive Friction Stir Deposition

SPG-35: Effects of Liquid Nitrogen Cryogenic Cooling on Nickel Aluminum Bronze Weld Metal Microstructure Manufactured with Directed Energy Deposition Process

SPG-36: Electroplating Metal Powder for Cold Spray Application

SPG-38: Grain Interface Functional Design to Create Damage Resistance in Polycrystalline Metallic Materials

SPG-39: Impact on Microstructure and Densification of High and Low Heating Rates Sintering for Copper Modern Advanced Manufacturing

SPG-3: Enhancing Thiosulfate Stability and pH Control in Ammonium Thiosulfate Gold Leaching with Mg(OH)2

SPG-40: In Situ Correlative Transmission Electron Microscopy for Experimental Study of Grain Growth in Thin Films

SPG-41: Microstructural and Mechanical Characterization of Al 7075 Parts Processed by Additive Friction Stir Deposition

SPG-42: Microstructural Evolution in Austenitic Stainless Steels during Laser Sheet-metal Forming

SPG-43: Modeling Electrospray of Water and Liquid Metals

SPG-44: Multi-material Hybrid Manufacturing for Desired Composition, Tailored Properties and Complex Geometries

SPG-45: Multiscale Microstructure and Mechanical Characterization of Cu-Ni Alloys Produced through Hydrogel Infusion-based Additive Manufacturing (HIAM)

SPG-46: Multi-stimuli Integration in Alloy Design: Friction-assisted Processing of Al-Mg Alloys for High-performance Nano-composite Materials

SPG-47: Ni/Ga Ratio Effect on Cu-Cu TLP Bonding Process

SPG-48: Predicting Microstructure of Gas Atomized Reaction Synthesis 14YWT ODS Steel: A Thermodynamic Simulation Approach for Laser Powder Bed Fusion

SPG-49: Properties of Additive Friction Stir Deposition Aluminum 7075

SPG-4: Expanding the Study of Non-contact Modulation Calorimetry through Magnetohydrodynamic Modeling

SPG-50: Recycled Battlefield Titanium Scrap for Cold Spray Applications

SPG-51: Recycling Titanium Feedstock Powders for Re-use in Cold Spray Additive Manufacturing

SPG-52: Rheological Effects of Nanoparticles on Epoxy with Implications for DIW

SPG-53: SolidStir Extrusion: An Innovative Friction Stir Based Extrusion Process

SPG-54: Tuning the Microstructure in the Direct Energy Deposited Metastable Beta Ti-5Al-5Mo-5V-3Cr Alloy for Aerospace Applications

SPG-55: Voronoi Tessellation Validation for Analysis of Microstructural Data from Sintered Porous Metal Structures

SPG-56: Wire-Arc Directed Energy Deposition (DED) of High-strength Low-alloy (HSLA) Steels for Replacement of Conventionally Manufactured HY-80

SPG-57: Anomalous ParticleFormation in eGaIn Exposed to Zinc Metal

SPG-58: Assessment of Strength-ductility Balance, Strain Hardening, and Fracture of Massive Ferrite in Ti-stabilized Interstitial-free Steel

SPG-59: Bonding Mechanisms between Steels and Mg Alloys having Different Composition using Ultrasonic Spot Welding

SPG-5: Kinetic Study on Deoxidation of Molten Copper by the Carbon Monoxide Gas Bubbling

SPG-60: Characteristics of Laser and Electron Beam Welds of Borated Stainless Steel for Neutron Absorbers and Structural Materials for Storage of Spent Nuclear Fuel

SPG-61: Characterization of Microstructure Periodicity in Additively Manufactured Components Fabricated through Laser Powder Bed Fusion: An Analysis Based on Orientation Segmentation Image Analysis

SPG-62: Compositional and Structural Non-uniformity in Refractory High Entropy Alloys

SPG-64: Design of Novel Alloys via CALPHAD-based High Throughput Calculations

SPG-65: Effect of Compositional Changes on the Microstructure and Creep Resistance of High Entropy Superalloys

SPG-66: Fracture Toughness of Additively Manufactured Tungsten

SPG-67: High-temperature and High-pressure Water Chemical Wear Characteristics of Cobalt-free Reduced Activation Hard-facing Material for Light Water Reactor Valves

SPG-68: High Entropy NiTiHfZrCu Shape Memory Alloys; Transformation temperatures, Microstructure, and Mechanical Performance

SPG-69: Investigation of Fuel Chemical Cladding Interactions with UO2 and UN using Diffusion Couples

SPG-6: Phytomining for Rare Earth Elements: A Comparative Life Cycle Assessment

SPG-70: Investigation of the Microstructural Analysis in Dwell Fatigue Tested Ti-6246 Alloy

SPG-71: Mechanical Behavior of LLZO Solid Electrolytes: In Situ SEM Micropillar Compression and Ab Initio Insights

SPG-72: Microstructural Aspects and Mechanical Characterization of Laser Powder Bed Fusion Processed C103

SPG-74: Probing Structural and Compositional Heterogeneity in High Entropy Carbides: Impact of Cr Addition and Mechanical Stress

SPG-75: Simulations of the Effect of Temperature on Deformation Behavior of Small Metal Nanoparticles

SPG-76: Stabilization of Dendritic Copper Wick Structure through a Two-step Electrodeposition Process

SPG-77: Stress Fluctuations due to Random Interstitials in HCP Ti

SPG-78: Structure Evolution and Sn Redistribution Accompanying Zircaloy-4 Oxidation

SPG-79: Temperature Effects on Dealloying Behavior of Binary Ni-20Cr Alloy in Molten FLiNaK

SPG-7: Project Tethys: Extracting Water from the Martian Environment

SPG-80: Utilizing Machine Learning Techniques to Correlate Constituent Redistribution, Fission Gas Bubble Structures, and Thermal Conductivity Changes in Annular, Irradiated U-Zr Fuels

SPG-8: Recovery of Rhenium from Superalloy Swarf, Grindings, Turnings, and Scrap

SPG-9: Unraveling the Structural Dynamics of Cu6Sn5 Hexagonal Phase under Electrical Current Stressing

SPU-10: Entrapment of Volatile Organic Compounds in UiO-66 Metal-organic-framework: An Ab Initio Molecular Dynamics Study

SPU-11: Exploring Biofiber Properties and their Influence on Critical Biocomposite Quality

SPU-13: Microstructure of Rapidly Solidified M2 High-Speed Steel by Multi-Beam Laser Melting

SPU-14: Open Cell Structure Volumetric Shrinkage in Additively Manufactured Alumina

SPU-15: Spark Plasma Sintering of Graphitic Matrix for TRISO Compact Fabrication

SPU-16: Synthesis of Spherical Uranium Dioxide Powder Feedstock for Fused Deposition Modelling (FDM)

SPU-17: The Internal Temperature Profile of a Pyrometallurgical Furnace from External Fiber Optic Measurements using Distributed Temperature Sensing (DTS)

SPU-18: Studying the Effects of Aging on the Structure and Properties of Off-eutectic Pb-Sn Solder Joints for In-space Applications

SPU-19: The Novel Creation of Nanoporous Metal Oxides via the Oxidative Dealloying of Mo-alloys

SPU-20: Understanding and Protecting Refractory High Entropy Alloys from High Temperature Oxidation through Use of High Entropy Rare Earth Oxide Coatings

SPU-21: Using Bound Powder Extrusion for Multi-materials

SPU-2: Advanced Porous Scaffolding Design using Electrospun Nano/Microfibers for Tunable 2-dimensional Cell Culture Applications

SPU-4: Functionalization and Performance Evaluation of Lignin-derived Carbon Fibers as Supercapacitor Electrodes

SPU-5: Investigating the Correlation Between Tip-to-collector Distance and Electrical Current during Near-field Electrospinning Process

SPU-6: Optimization of VaspSol Solvation Free Energy Predictions

SPU-7: Effects of LPBF Parameters on Fatigue Life of AlSi10Mg Alloys

SPU-8: Additive Manufacturing of Carbon Steels via Direct Reduction of Oxide Precursor Inks and Gas Carburization

Questions about ProgramMaster? Contact programming@programmaster.org