ProgramMaster Logo
Conference Tools for 2020 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Symposium
Meeting 2020 TMS Annual Meeting & Exhibition
Symposium Alloys and Compounds for Thermoelectric and Solar Cell Applications VIII
Sponsorship TMS Functional Materials Division
TMS: Alloy Phases Committee
Organizer(s) Sinn-wen Chen, National Tsing Hua University
Franck Gascoin, Ensicaen University of Caen
Philippe Jund, Montpellier University
Yoshisato Kimura, Tokyo Institute of Technology
Lan Li, Boise State University
Takao Mori, National Institute for Materials Science
Hsin-jay Wu, National Chiao-tung University
Tiejun Zhu, Zhejiang University
Scope This symposium addresses synthesis, property measurements, phase stability, phase transformation of the alloys and compounds used in the thermoelectric and solar cell devices. Materials of interests include, but not limited to, skutterudites, superlattice, half-heusler alloys, CdTe, CIS, CIGS, CZTS and new materials for thermoelectric and solar cell applications.
Abstracts Due 07/15/2019
Proceedings Plan Planned: Supplemental Proceedings volume
PRESENTATIONS APPROVED FOR THIS SYMPOSIUM INCLUDE

3D Printing of High-Performance and Flexible Thermoelectric Materials and Devices Using 2D Colloidal Nanocrystals
Ab initio calculations of thermoelectric materials
Ab initio study of TiMSn (M= Ni, Pt, Pd) alloys using the CRYSTAL ab-initio package.
Accelerated Discovery of Efficient Solar-cell Materials using Quantum and Machine-learning Methods
Approaches to manipulate p-n conduction transition and high thermoelectric performance in Ga-incorporated Bi2Te3
Assessment of Co-P Diffusion Barrier for Bismuth Telluride-based Thermoelectric Materials
Assessment of interface in Bi2Te3 and Sb2Te3 thin film thermoelectric modules
Black phosphorus and semiconducting transition metal dichalcogenides in contact with transparent conductive oxides for high efficiency solar cells
Current Progress on Fabrication and Life Testing of Advanced Skutterudite Thermoelectric Materials in A Proposed Enhanced Multi-Mission Radioisotope Thermoelectric Generator (eMMRTG) for Space Power Applications
Defect formation energies and effective masses in the Mg2(Si,Sn) solid solutions via DFT calculations.
Enhanced averaged zT in n-type Bi2Te3 via solubility control
Gradient Composition Layered Microstructure Development in Thermoelectric Mg2(Si,Sn) Alloys Based on Phase Equilibrium
Heat Stability of Mg2Si1-xSnx as Affected by Heat Treatment Temperature and Duration
High reliability package of perovskite solar cell by SiNx passivation layer with Sn-Bi-In low-melting solder
Improving the thermoelectric properties of atomized BiSbTe alloy by electroless copper coating
Interfacial reactions between Bi2Te3 substrate with Cu, In, Sn and Ni
Intrinsic Cu vacancy leading to high thermoelectric performance in CuBi3Se5
Laser Additive Manufacturing of Bismuth Telluride and Silicide Thermoelectric Materials
Lattice Hardening Due to Vacancy Diffusion in (GeTe)mSb2Te3 Alloys
Mass production of highly performing BiSbTe thermoelectric materials through powder metallurgy
Minor Ga addition in β-Zn4Sb3 leads to major enhancement in thermoelectric performance
Minor Ga addition in β-Zn4Sb3 leads to major enhancement in thermoelectric performance
Multi-band electronic and thermal transport in Fe2VAl based full Heusler thin films
New thermoelectric Zintl phases with defects and interstitials
Novel thermoelectric materials for power generation
Optimization of thermoelectric performance of nitrogen- and boron-Doped carbon nanotubes
Optimizing power factor in rare earth-free CoSb3-Skutterudite thin films
Phase diagram of Bi-Cu-Te and Thermoelectric properties of Cu doped Bi2Te3 alloys
Phase diagrams of Ag-Cu-Te ternary system and Ag2Te/Cu interfacial reaction
Phase diagrams of Ag-Pb-Sn-Te system
Polar tintermetallics as high temperature thermoelements
Portable Nanostructured Magneto-Thermoelectric Bi-Sb Alloys at Cryogenic Temperatures
Realizing the compositional homogeneity in GeTe-based thermoelectric materials and phase transition behavior
Realizing the microstructure in GeTe-based thermoelectric materials and phase transition behavior
Recent developments in Fe-based thermoelectric Heusler alloys
Severe Plastic Deformation (SPD) via High Pressure Torsion (HPT) a perfect tool not only to enhance ZT of thermoelectric materials but also to produce them
Synthesis, processing and characterizations of functional materials for industrial applications.
Thermal storage effect on thermoelectric module
Thermoelectric films deposited by pulsed magnetron sputtering
Thermoelectric Half Heusler Systems {Nb,Ta}FeSb - Ti1+xFe1.33-xSb
Thermoelectric Properties of Amorphous ZnOxNy Thin Films at Room Temperature
Thermoelectric properties of multiply doped Mg3(Sb, Bi)2
Thermoelectric properties of p-type Mg doped CuMO2 delafossite thin films and modules
Transmission Electron Microscopy Study of Hole-Selective Contacts Employed in Silicon Solar Cells
Using energy filtering to change the thermoelectric design paradigm
Utilizing Magnetism and Dilute Magnetic Semiconductors to Enhance Thermoelectric Performance
ZT Enhancement in Thermoelectric Nanowires


Questions about ProgramMaster? Contact programming@programmaster.org