Crystal plasticity analysis of plastic deformation behavior of a 6022-T4 aluminum alloy sheet under various strain paths

1180DP material calibration between sheet metal simulation and prototype

A 3D Material Model for Finite Element Analysis of Aluminium Extrusions for Crash Applications

A Comparative Study of Incremental Sheet Forming Process to Achieve Optimal Accuracy

A Machine Learning Based Framework to Predict Local Strain Distribution, Fracture and the Evolution of Plastic Anisotropy in AlSi10Mg Alloy

A measurement of tension/compression asymmetry in stress and r-value and the establishment of a constitutive model based on non-associated flow rule

A new sample for oscillation free force measurement at high strain rate and its physical principle

A novel testing methodology for in-situ microstructural characterisation during continuous strain path change

A numerical study of local elastic tool deformation in sheet metal forming simulation

A phase-field modeling study of sheared edge formability of steels

A Thermal Extension of the GISSMO Fracture Framework for Hot-Stamping Operations

A virtual laboratory based on full-field crystal plasticity simulations to predict the anisotropic mechanical properties of advanced high strength steels

Accurate evaluation of friction and wear during stamping operations using metal forming tribometer

An approach to characterize the post necking behavior based on anisotropic hardening

An Artificial Intelligence Tool for Predicting The Crash Pulse Response in a Crashworthiness Application of Vehicle Lightweighting

An Efficient Methodology to Characterize Anisotropic Sheet Metals from Uniaxial to Plane Strain Tension Using Notch Tests

An Experimental Methodology to Measure the Through-Thickness Strain Gradients in the VDA 238-100 Tight Radius Bend Test

An inverse engineering approach for the calibration of advanced plasticity and fracture models for lightweight metals

An upper bound analysis of friction stir spot welding processes

Analysis of damage and fracture mechanisms in steel sheets: biaxial experiments and numerical simulations

Analysis of functional cup of titanium with corrugated structure

Analysis of Plane Strain Tension Regions of Anisotropic Yield Criteria for Sheet Metals

Analysis on deformation behavior of high strength steel using the finite element method in conjunction with constitutive model considering the elongation at yield point

Anisotropic and Time-Dependent Continuum Damage Coupled Plasticity Model for Predicting Ductile Fracture of AA 6xxx

Anisotropic Failure Characterization and Modeling of Advanced High Strength Steels

Automotive sheet metal panels stiffness prediction based on convolutional neural network deep learning

Characterization of cohesive zone model properties of laminated metal sheet with a thin adhesive layer

Characterization of kinematic hardening using two-stage hydraulic bulge test

Coefficients optimization with load cycles for new homogeneous anisotropic hardening model (HAH20)

Comparison of experimental and finite element analysis results of a car body part with the optimization of material parameters

Comparison of non-associated fourth-order and associated sixth-order anisotropic plasticity models in sheet metal forming simulations

Constitutive Behaviour of AA7075 at Elevated Temperatures

Convergence behaviors of anisotropic hardening models in finite element framework

Coupled crystal plasticity finite element-cellular automaton approach to model microstructural evolution in AZ31 magnesium alloy hot-rolled sheet

Crystal Plasticity Modelling of Large Strain Behaviour of Ti Sheet Alloys

Crystal Plasticity Modelling of Localization in Precipitation Hardened AA6060

Damage evolution in DP600 sheets using a combined finite element – cellular automata model

Deformation analysis on a stamping tool by interworking between forming and structure simulation

Deformation and failure behavior of steel under high strain rate and multiaxial loading

Deformation and fracture in micro-stamping process

DEFORMATION MECHANISM OF A NOVEL DOUBLE-SHEET INCREMENTAL FORMING

Deformation Response and Austenite Transformation in Quenching and Partitioning Steels

Design Guideline of the Bolt Hole Based on the Parametric Formability Analysis in the TV Back Panel Stamping Process

Determination of the evolution of the contact conditions that affect the tool wear behaviour during hot stamping of aluminium alloys by integrating laboratory tests and finite element analysis.

Development and Application of Metal Forming Simulation System Strongly Coupled with Die Tool Deformation

Development of a Digital Twin Metamodel for Closed-loop Control of Progressive Dies

Development of a hot cutting process for functional parts by stress state dependent damage modeling

Die Quench Thermal and Friction Boundary Conditions

Dimensional Compliance through Springback Reduction, Countermeasure, and Compensation – A Digital Engineering Perspective

Draw die development to maximize aluminum formability potential for making styling featured outer panels

Effect of current carrying length in electric pulse aided deformation

Effect of pre-deformation on the shape evolution of yield surfaces for anisotropic Mg alloy: experiments and constitutive modeling

Effect of strain gradient sensitivity on stretch flange deformation limit strain of steel sheets

Effect of strain rate on formability of 22MnB5 steel during hot stamping process

Effect of Thermal Treatment on Deep Drawability of AA3xxx Alloy

Effect of width/thickness effect of sheet metals on bendability

Effects of temperature on deep drawing of an aluminum alloy for different yield criteria and hardening models

Efficient Numerical Simulation of Stringer Sheet Forming Processes

Enhanced Isotropic Hardening Modeling of Orthotropic Sheet Metals

EVALUATING LUBRICANTS FOR WARM FORMING OF ALUMINUM 6XXX ALLOYS

Evaluation of the effect of material surface texturing in the galling and friction of aluminum stamping

Evaluation of the Influence of Through-Thickness Gradients and Tool Contact Pressure on Formability in Stretch-Bend Tests

Evolution of the R-value and Its Determination Based on Reverse Fitting for Sheet Metal

Experimental and numerical evaluation of the fracture limit diagram using DIC method and finite element model

Experimental and numerical study on the effect of support force in double sided incremental forming

Experimental determination and numerical prediction of the dynamic forming limits of a press hardened steel

Experimental investigation of strain hardening up to large deformation and fracture by in-plane torsion tests for 5182 aluminum alloy

Experimental setting and calculation method on interfacial heat transfer coefficient in hot stamping process

Fatigue life prediction of a deep-drawn cylindrical cup

FE Simulations about the Influence of Work Hardening Derived from Embossing Process on Hole-expansion of Duplex Embossed Sheet

Finite element analysis of micro/meso-scale parts formed through incremental micro-forming (μISF)

Finite Element and Experimental Investigation of Multi-Stage Deep Drawing of Stainless Steel 304 Sheets at Elevated Temperature

Formability Characterization of 3rd Generation Advanced High-Strength Steels and Application to Forming of a B-Pillar

Forming-induced Distortion of Dissimilar Ti-Al Laminated Composite Plate after Non-equal Channel Lateral Co-extrusion

Fracture Characterization in Combined Shear and Tension: Evaluation of Specimen Geometry

Identification and validation of Brass material parameters using single point incremental forming

Identification and Validation of the Plasticity and Failure Parameters for EN AW-6061 T4 Aluminium Sheet

Identification of dynamic hardening properties with acceleration by the Virtual Fields Method

Impact of Thermal Conditions on Predicted Formability of TRIP Steels

Implementation of polynomial yield functions and flow potentials in finite element user material subroutines

Implementation of Real Contact Areas into Sheet Metal Forming Simulations using Digital Spotting Images

Improvement of dynamic crash performance for patterning cylindrical tube using local laser hardening/softening technology.

Influence of loading direction on the mechanical parameters of pre-formed tensile tests

Influence of Process Parameters on Orange Peel Effect in Warm Incremental Forming of Magnesium Alloy AZ31 Sheet

Influence of Temperature on Strain and Stress Forming Limit for Inconel 718 Superalloy

Influence of the orthotropic behavior on the failure prediction during the cup expansion after drawing and redrawing

Investigating the formability and failure mechanism of an advanced high strength steel by a microstructure based hierarchy modeling approach

Investigating the microstructure evolution during uniaxial deformation on a dual phase steel by in-situ measurement and crystal plasticity finite element model

Investigation of free surface roughening on metal materials using a rate-dependent crystal plasticity finite element analysis

Investigation on The High Strain Rate Formability of Al-Cu-Mg Alloy by Solid-liquid Coupling Simulation

Learning Product Properties with Small Data in Forming Simulations

Loading Path Effects on Fracture Prediction during Bending Process using GTN Fracture Criterion

Local heat treatment concept for springback reduction in deep-drawing of advanced high-strength steel

Lode dependence effect in the fracture simulations of small punch testing

Meso-scale modeling of spot weld failure in hot stamped automotive steel using hardness mapping approach

Modeling and optimization of stretching for double curvature fuselage panel

Modeling of the anisotropic evolution of yield surface based on non-associated flow rule

Modeling of the strain rate sensitivity of the damage/fracture behavior of the AA5754 aluminum alloy during a stamping operation

Modelling induction heating of aluminium sheets for hot stamping

Modelling of hybrid thermoforming processes and investigation of the components crash performance

Neutron Diffraction and Crystal Plasticity Analysis on Q&P Steel in Deformation

New forming process for springback reduction by superimposing compressive stresses

Non-associated and non-quadratic characteristics in yielding of sheet metals

Numerical and experimental study of single point Incremental Forming of Sheet metal

Numerical description of the physical properties of stretch web connectors in the Progressive Die Stamping

Numerical investigation of a two-stage shear cutting process considering cutting-offset and contour geometry

Numerical Modeling and Optimization of Fiber Metal Laminates

Numerical prediction of failure in single point incremental forming using a new yield criterion for sheet metal

Numerical prediction of stretch flange crack using necking initiation model

Numerical prediction of the rate and temperature dependent flow curves of USIBOR1500 using NN, GA and MCMC methods

Numerical Simulation of Chain-die Forming Based on LS-DYNA

Numerical simulation of gravity loading and QUICKFORM sheet metal forming finite element solver

Numerical study of the Maximum Force Principle to predict necking under stretch-bending

Numerically coupled tools for double sided incremental sheet forming

On the interest of simple shear tests in sheet metal forming

ON THE MECHANICS OF EDGE CRACKING AND THE RELIABLE DETERMINATION OF EGDE FORMABILITY LIMITS

On the Prediction of the Plastic Instability of AA7075-O and H240LA Steel Sheets under Complex Deformation Histories

Optimization of slip conditions in roll forming by numerical simulation

Performance Evaluation of Planar Anisotropy Yield Functions for Sheet Metal Forming Analysis

Performance of Constitutive Models in Finite Element Analysis

PLANE STRAIN PURE BENDING UNDER TENSION WITH DAMAGE EVOLUTION

Potentials for material card validation using an innovative tool

Predicting forming limit diagrams using crystal plasticity finite element incorporated with Marciniak-Kuczynski model for magnesium alloy sheets

Predicting the flow and failure properties of Dual Phase Steel using phenomenological models

Prediction of Deformation and Failure Anisotropy for Magnesium Sheets under mixed-mode Loading

Prediction of Ductile Fracture in Bainitic Steel with Dependence on Stress States and Loading Orientation

Prediction of failure in sheet metal forming simulation - an integrated approach for shell and solid discretization

Research on electric current-assisted draw-bending of AA7075-T6 sheet

Research on Fracture Behavior of Steel Material for Battery Shell

RESEARCH ON SIMULATION ANALYSIS OF METAL RUBBER SEALING SYSTEM MODEL

Sensitivity Study of Plastic Anisotropy on Failure Prediction in Hole-Expansion

Shape Optimization of a Cruciform-Like Specimen for Combined Tension and Shear Loading

SHEET FORMING SIMULATIONS WITH ADVANCED CONSTITUTIVE MODELING

Simplified Identification Method of Yield Function Using Circumscribing Polygon of Yield Surface and Its Application for Deep-drawing process

Springback investigation of advanced path-dependent constitutive models for sheet metal forming

Springback vs Blank holder force: Evaluation and validation of a part made from non-stable austenitic 1.4301 Steel.

Structural optimization of an automotive engine cradle design considering sheet metal insert and fiber-reinforced thermoplastic polymer overmolding

Study on ductile fracture behavior during hole expansion test using microstructure based dual-scale approach

Study on the influence of the strain rate sensitivity on the springback of the AA5086 alloy under warm forming conditions

Studying the Micromechanical Behaviors of a Polycrystalline Metal by Artificial Neural Networks

Tensile mechanical properties of steel-Al explosion-bonded clad plate

The Development of Constitutive Parameters for an 1800 MPa Press Hardening Steel

The Effect of Twinning/detwinning on the Evolution of Texture and Microstructure under Cyclic Loading of AZ31 Magnesium Alloy

The importance of the choice of the yield criterion in triaxiality evaluation for highly anisotropic Zirlo sheets

The influence of manufacturing tolerances and scatter in material properties on joint point loadings in car body structures under global bending and torsion

The influence of tool types on surface topography in incremental sheet forming

Time Dependent Method For The Inverse Evaluation Of Yield Locus Using Nakazima Experiments

Time series-based fracture prediction by using an artificial neural network

Tool surface functionalization for improved tribological system in sheet metal forming applications

Tube hydroforming: material characterization and friction measurement

Validation of comprehensive material and friction models for simulation of thermo mechanical forming of high strength aluminium alloys using HFQ Technology

Validation of Part Holder Models of Car Body Upper Line Dies for Return Stroke Loads

Yield Surface Prediction by Virtual Microstructure and Testing

Young’s modulus under non-proportional load paths

Questions about ProgramMaster? Contact programming@programmaster.org