|About this Abstract
||NUMISHEET 2021: The 12th International Conference on Numerical Simulation of 3D Sheet Metal Forming Processes
||The Development of Constitutive Parameters for an 1800 MPa Press Hardening Steel
||Stan Lu, Michael Worswick, Constantin Chiriac, Cangji Shi
|On-Site Speaker (Planned)
The constitutive behaviour of an Al-Si coated 1800 MPa press hardening steel was determined under hot stamping conditions. Isothermal and non-isothermal tensile tests were conducted using a Gleeble thermal mechanical testing system. The flow response of the material was characterized with a novel high temperature digital image correlation (DIC) procedure and was used to determine the rate- and temperature-dependent constitutive response. Afterwards, a numerical simulation of the tensile test was conducted to validate the accuracy of the constitutive equation. As a baseline comparison, the same process was repeated to characterize a common 22MnB5 steel.
||Definite: At-meeting proceedings