ProgramMaster Logo
Conference Tools for 2022 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2022 TMS Annual Meeting & Exhibition
Symposium 2022 Technical Division Student Poster Contest
Presentation Title SPG-20: Effects of Cu on the Interfacial Stability of Nanoprecipitates in Al-Zn-Mg-Cu Alloys from First-principles Investigations
Author(s) Yu-ning Chiu, Chung-yi Yu, Shih-kang Lin
On-Site Speaker (Planned) Yu-ning Chiu
Abstract Scope The benefit of Cu on preventing thermally induced precipitate transitions and resultant softening in 7000 series aluminium alloys (Al-Zn-Mg-Cu alloys) has been well studied over the past decades. However, the stabilization mechanism of Cu has yet been understood clearly. As a result, the interfacial structures and energetics of nanoprecipitates η’ and η2 in Al-Zn-Mg-Cu alloys were thoroughly investigated through first-principles calculations. The most feasible interfacial structures for η’ and η2 with Cu segregated in were constructed, and with which, a comprehensive discussion on interfacial energy and strain energy as well as atomic local strain hydrostatic invariant (ALSHI) were provided to study the effect of Cu. In this study, we concluded that the main driving force for induced interfacial segregation and resultant stabilization were mostly contributed from the relieved strain energy. Thus, ALSHI can serve as a considerably useful guideline for optimal interfacial segregation and future alloy design of Al-Zn-Mg-Cu alloys.
Proceedings Inclusion? Undecided
Keywords Aluminum, Phase Transformations, Computational Materials Science & Engineering

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

SPG-10: Assessing the Bio-stability of miRNA Conjugated Metal and Metal Oxide Nanoparticles via Electroanalysis
SPG-11: Crumpled MoS2 Flexoelectric Energy Harvester
SPG-12: Dual miRNAs Functionalized Cerium Oxide for Angiogenesis and Anti-inflammatory
SPG-13: Engineering Ce3+ State in Cerium Oxide Nanoparticles Under The Presence of a Reducing Sugar
SPG-16: Study of Anti-inflammatory miRNA146a Loading on Cerium Oxide Nanoparticles with Different Surface Facet
SPG-17: Upconversion Nanomaterials (UCNPs) Based Self-sterilizing Surfaces with Efficacy Against SARS-CoV-2
SPG-18: A Promising Orthopedic Implant Material with Enhanced Corrosion Resistance, Mechanical Properties, Osteogenic and Antibacterial Activity: Mg-Sc-Sr Alloy
SPG-19: Development of Equiaxed Titanium Alloys in Additive Manufacturing
SPG-1: Challenges for Molten Oxide Electrolysis in Reduced Gravity
SPG-20: Effects of Cu on the Interfacial Stability of Nanoprecipitates in Al-Zn-Mg-Cu Alloys from First-principles Investigations
SPG-22: Microstructural Evolution during Post Processing of Additively Manufactured 7050 Aluminum Alloy and Its Effect on Corrosion Behavior
SPG-23: Prior Grain Boundary Alpha in BASCA Ti-17
SPG-28: Microstructure and Mechanical Properties of Eutectic Ni-Ce and Ni-Ce-Al Alloys
SPG-29: Production via Machining and Rolling of High Resistivity Electrical Steel
SPG-2: Decopperization Study for Steel Recycling
SPG-32: Water Transport through Porous Membranes - Modeling and Experiments
SPG-33: Computational Modeling of Non-equilibrium Phenomena in Laser Additive Manufacturing Using Molecular Dynamics
SPG-34: Development of a Generalized Fatigue Assessment Approach for Steel Castings
SPG-35: Discovering the Corrosion Mechanism of Chromium in High-temperature LiF-NaF-KF Molten Salts for Gen-IV Molten Salt Reactor Applications
SPG-36: Effect of Oxide Impurities on Corrosion of Materials in Molten Fluoride Salt
SPG-39: Mechanical Behavior of a Next-generation Steel (AF9628) Printed via Directed Energy Deposition
SPG-3: Influence of Graphene Nano Sheets on Friction and Wear Behaviour of Aluminum A380 Nanocomposite Produced by Powder Metallurgy
SPG-4: Investigating of the Microstructure and Mechanical Properties of Al- A380 Nanocomposite Reinforced with SiC Nanoparticles Produced by Powder Metallurgy
SPG-5: Investigating of the Wear Behavior of Al- A380 Nanocomposite Reinforced with SiC Nanoparticles Produced by Powder Metallurgy
SPG-6: Recycling of CrC-nichrome Coated Stainless Steel by Remelting and Addition of Alloys with Validation from Mathematical Modelling
SPG-7: Sustainable Process Flowsheet for Recovery of Value added Products from Bauxite Residue
SPG-8: The Effect of Graphene Nano Sheets on Microstructure and Mechanical Properties of Aluminum A380 Nanocomposite Produced by Powder Metallurgy
SPU-10: Correlating Grain Boundary Energy to Abnormal Grain Growth Using Atomic Force Microscopy
SPU-11: Model Based Control of Microstructure for Additive Manufacturing 316L Stainless Steel
SPU-12: Quantitative Analysis of Microstructure in the Ti-6Al-4V Alloy Using Scanning Electron Microscopy
SPU-2: Small bugs for big problems: Enriching microbes to degrade plastics
SPU-3: Investigation of Nanoparticle Size Effects on the Dielectric Properties of Functionalized Barium Titanate
SPU-4: Medical Applications of Polymer Coated Cannulas
SPU-5: Thermomechanical Clamp for Curing Low-κ Dielectric Dry Films
SPU-7: Investigate the Effect of Crystallographic Orientation on the Mechanical and Corrosion Properties of Copper Single Crystals
SPU-8: COMSOL-generated Weld Heat Transfer Models For Automation of Infrared Thermography Non-destructive Testing (IR-TNDT) Image Analysis
SPU-9:Mechanochemistry for Creation of Functional Surface Treatments

Questions about ProgramMaster? Contact programming@programmaster.org