ProgramMaster Logo
Conference Tools for 2024 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Symposium
Meeting 2024 TMS Annual Meeting & Exhibition
Symposium Aluminum Alloys: Development and Manufacturing
Sponsorship TMS Light Metals Division
TMS: Aluminum Committee
Organizer(s) Christopher R. Hutchinson, Monash University
Sazol K. Das, Novelis
Samuel Wagstaff, Oculatus Consulting
Scope The Aluminum Alloys: Development and Manufacturing Symposium is part of the Light Metals program. This is an excellent opportunity to interact with experts from the Light Metals industry and academia from all over the world and get the latest update on key issues in the industry. The symposium covers all aspects of the physical and mechanical metallurgy of aluminum alloys as well as processing methods (continuous casting is covered by Cast Shop Technology), product development, testing, and implementation of aluminum for end applications, including transportation (automotive, aerospace, and marine), packaging, and other key product segments. You are invited to submit papers of fundamental and applied research in the following subject areas:

- Alloy Development
- Microstructure Evolution and Characterization
- Defect Detection and Control
- Surface Modification and Control
- Mechanical Behavior
- Material and Process Modeling
- Processing Innovation
- Process Control and Measurements
- New Applications and Products

Note regarding publication: Authors seeking an oral presentation opportunity must submit a manuscript for the Light Metals proceedings or be accepted for publication in a TMS journal. Authors seeking a poster presentation are not required to publish a paper, which would be an exceptional case taken by the symposium chair.

Abstracts Due 07/15/2023
Proceedings Plan Planned: Light Metals
PRESENTATIONS APPROVED FOR THIS SYMPOSIUM INCLUDE

6XXX Series of Extruded Aluminum Alloys’ Anisotropic Properties at Different Strain Rates’ Investigation With FEA
AMAG CrossAlloy® – Lightweighting the future by unconstraint alloy design: A case study
Annealing Behavior of Cold Rolling Sheets of a Continuous Cast Al-1.5Cu Alloy with Potential Application to Low Cost Auto Forming Parts or Sheets
Calculation and Experimental Investigation of Precipitates in 8021 Aluminum Alloy for Aluminum laminated Film
Comparing of Heating Systems for Aluminum Forging
Correlation of Thermodynamic Calculations and Mechanical Properties of an Al-Si Cast Alloy
Corrosion Effect on Mechanical Properties of Stamped Al Alloy 6451 for Auto Applications
Creative Approaches to Long-Term Recycling of Aluminium Scrap Forming AlSiMgMnCu Alloy with Excellent Mechanical and Microstructural Properties
Creep and fracture behavior of additively manufactured aluminum alloys
Design and characterization of hierarchically-strengthened, cast Al-Ce-Ni-Mn-Sc-Zr alloys for high-temperature applications
Determining the Corrosion Speed of Welded AA 5005 Alloy with AA5356 Filler Metals According to Weld Rate Using by MIG Welding Technique
Developing Banding Microstructures in Directional Solidification of Aluminum Metal Matrix Composites
Effect of annealing process on recrystallization structure, texture, and precipitates of 1235D aluminum sheets
Effect of Cold Rolling Prior to Homogenization Heat Treatment on the Microstructural Evolution and Mechanical Properties of Twin-Roll Cast 8026 Aluminum Alloy
Effect of Composition and Heat Treatment on Corrosion Resistance and Strength of High Strength 6xxx Series Alloys
Effect of Mg on cryogenic impact toughness of Al-Mg Alloys via cryogenic charpy impact tests
Effect of Mg solute on microstructural evolution of aluminum during a biaxial alternate forging
Effect of shot peening on fatigue properties of A20X fabricated by laser powder bed fusion
Effect of Silicon Content on Solidification Parameters and Microhardness of Al-Si Alloys
Effect of surface condition on corrosion behavior of high pressure die cast A383 aluminum alloys
Effect of thermomechanical processing on 7075 Al alloy
Effects of Alloying Elements Content on Microstructural Properties of AlMgSiCu Alloy
Energy-Efficient Mischmetal Substitution for Ce in Cast Al-Ce Eutectic Alloys and Enhanced Strengthening via Ni and Mg Additions
Enhancing Recycling Efficiency and Critical Raw Material Substitution in 6xxx Alloys Production with Respect to Their Extrusion Feasibility and Mechanical Properties
Evaluating the Effectiveness of a Damage Model to Determine Crash Behavior of Aluminum Extruded Box
Evaluating Three - Point Bending Behavior of Aluminum Extruded Thin Walled Structure
Fabricate sputter targets and evaluate sputter characteristics using high-purity Al refined material
Heat treatment of aluminum A20X manufactured using laser powder bed fusion
High-throughput compositional study of 3xxx Al alloy using laser synthesis and small-scale rolling: a case study
High Pressure Die Casting of AlSi10Mg Alloy: Influence of Rapid Solidification on Microstructure
Influence of Copper Addition on the Thermal Stability and Corrosion Behavior of Aluminum 6082 Alloy
Influence of Feed Rate on Microstructure and Hardness of Conventionally Spin-formed Al 6061-O Plate
Influence of Increased Fe, Cu and Zn Concentrations on Phase Formation in Aluminum A356 (AlSi7Mg0.3) Alloy
Influence of solidification rate and impurity content on 5/7-Crossover alloys
Influence of T6 and T7 Heat Treatments on the Mechanical Properties of Rheocast Secondary AlSi7Cu3Mg Alloy
Influence of welding tool material and type of joint on the formability of friction stir welded tailored blanks
Investigating the Corrosion Performance of EN-AW-8006 Alloy with Mn and Cu Additions
Investigating the potential of secondary aluminum cast alloys used as wrought alloys
INVESTIGATION EFFECT OF IN-SITU GRAIN REFINERS ON THE 1XXX AND 3XXX TWIN ROLL CASTED ALUMINUM PRODUCTS
Investigation Of Ripple Formation In Aluminum Flat Products Produced By Different Types Of Twin Roll Casters
Investigations on the solid-state additive manufacturing of Al alloy: Process, microstructure, and crystallographic texture
Machine Learning Assisted Development of Aluminum Alloys with High Strength at Elevated Temperatures
Mechanical behavior of a novel aluminum alloy with transition elements additions developed for laser powder bed fusion
Mechanical Improvement of Al-Ce Alloys
Meshfree process modeling and experimental validation of friction riveting of Aluminum 5052 to Aluminum 6061
Metallurgical and rheological properties of the equiaxed semi-solid aluminum alloys under compression: a combined study between electron microscopy and synchrotron X-ray tomography
Microstructure and Mechanical Properties of Additive Friction Stir Deposited Al-Ce Alloys
Microstructure and Mechanical Property of Sand Cast AA356 Aluminum Alloy Modified with Cerium
Model Development for Seam Optimization in Friction Stir Welded 7055 Aluminum Alloy T-Peel Joints
Nanoscale Analysis of Voids and Precipitant-matrix Interface in Aluminum 2219 Tensile Samples
New 6xxx Al-Mg-Si alloy with high electric conductivity and great bendability for EV applications
New insight into the complex nature of η-phase Grain boundary precipitates in 7xxx Aluminium alloys
Parameters controlling drilling and tapping characteristics of Aluminum based alloys
Preparation of high porosity aluminum foam by supergravity infiltration method
Role of Intermetallic Compounds on Hot Tearing and Heat Treatment Characteristics of Wrought Aluminum Alloys: A Combined Study Among Multiscale Characterization, Synchrotron X-ray Tomography and CALPHAD Approaches
Solid phase recycling and upcycling: direct extrusion high strength aluminum from AA 6063 chips
Study of Zinc Added 6082 Alloy Compared With Vanadium Added 6082 Alloy As Possible High Strength Crash Box Alloys
Synergistic enhancement of strength and ductility in Novel Solid-Stir Continuous Extrusion: influence of heterogeneous microstructure and alloy chemistry
The effect of cold rolling strain degree in corrosion resistance of fully soft temper automotive 5182 alloy
The Effect of Shot Peening and High Temperature Shot Peening on the High Cycle Fatigue of 7010-T7452 Aluminum Alloy
The role of intermetallic compounds on the microscopic plastic deformation in the Al-Zn-Mg-Cu alloys
THERMOMECHANICAL AND METALLOGRAPHIC COMPARISON OF TWIN ROLL CASTED 1235, 3003, 8006, 8011 ALLOY SERIES USED IN THE PRODUCTION OF FOIL MANUFACTURING
Tuning Chemistry for Eutectic Strengthening of LBPF Al Alloys
Utilizing Magnetic Field Annealing to Enhance the Microstructure and Mechanical Properties of 7075 Aluminum Alloy
Variations in thermal conductivity depending on the graphite content of aluminum-graphite heat dissipation material
X-Ray Computed Tomography of Fracture Paths in AA7075-T6 Sheet Torn at 200 °C


Questions about ProgramMaster? Contact programming@programmaster.org