| About this Abstract |
| Meeting |
2024 TMS Annual Meeting & Exhibition
|
| Symposium
|
Aluminum Alloys: Development and Manufacturing
|
| Presentation Title |
Determining the Corrosion Speed of Welded AA 5005 Alloy with AA5356 Filler Metals According to Weld Rate Using by MIG Welding Technique |
| Author(s) |
Hüseyin Müstak, Günhan Bayrak, Yusuf Özçetin |
| On-Site Speaker (Planned) |
Yusuf Özçetin |
| Abstract Scope |
Corrosion is one of the most damaging and costly naturally occurring events seen today. There are several methods for predicting the corrosion rate. In the present study, AA 5005 cold rolled plate was used for welding application with AA5356 filler materials using the MIG welding process. 780 mm/min and 900 mm/min weld rates were applied for the weld joint of the cold-rolled AA 5005 plate. The Tafel extrapolation method was used for the investigations of the weld joint, heat-affected zone, and base metal. Analyses are done in DC Corrosion Software and corrosion products have been observed at SEM. Beside Tafel test, Salt spray test had been applied to samples and checked visually. At higher speed, the result shows that corrosion resistance is better than at slower speeds. |
| Proceedings Inclusion? |
Planned: Light Metals |
| Keywords |
Joining, Pyrometallurgy |