45 Year’s Research and Development on Metal Forming and Joining

A Brief Review on Bar Straightening

A Computational Study on the Producible Rolling Thickness in Ultra-thin Strip Rolling

A Contact and Friction Model for Forming of Galvanized Steel Sheet Based on Fractal Theory

A Critical Review on the CPFEM Models Accounting for Gain Boundary Hardening Effect and Some Developments toward Simplification of the Wagoner Super-Dislocations (SD) Model

A Fast Computational Model for the Local Stress Distribution and Mechanical and Thermal Work Roll Deformations with Effects on Strip Profile and Flatness during Hot Rolling of Strip in Four-high Mills

A FE Billet Model and A Spring-mass-damper Press Model for the Simulation of Dynamic Forging Process: Application to a Screw Press

A Hot Forming Method for Die Temperature Higher than Billet Temperature

A Micro-macro Approach to Model the Residual Stresses in Metastable Austenitic Stainless Steel (MASS) Disc Springs Manufactured by Incremental Sheet Forming (ISF)

A New Approach for Measuring the Plastic Flow Behaviour in the Cutting Zone during Shearing in a Punching Machine

A New Approach for the Production of Burr-free Sheet Metal Components Having Significantly Increased Residual Formability

A New Criterion for Triclinic-asymmetric Yielding: Implicitly Describing Anisotropy and Distortional Asymmetry

A New Non-destructive Testing Method Applied to Clinching

A New Numerical Technique for Correction of the Stress-strain Curve and the Stress–strain Distribution on Neck Section in Tensile Specimen

A New Pure Bending Device for Material Properties Test of Sheet Metal

A New Test Method for Sheet Metal Deformation Subjected to Tension under Cyclic Bending and Compression (TCBC)

A Novel Approach to Predicting Surface Properties Generated during Metal Forming Processes

A Novel Continuum Damage Constitutive Model for Predicting the Forming Limit of AA7075 Alloy at Elevated Temperatures

A Novel Flexible Skew Rolling Process for Step Shafts: Feasibility Study

A Novel High Efficiency Method of Forming Polymers: An Insight into Their Forming Mechanism and Thermal Properties

A Novel Method to Fabricate 3D Structure Material with Mixtures of Coarse and Nano Grains by 3D Incremental Rolling

A Numerical and Experimental Investigation on the Full Path Crack Propagation for Duo-scale Microstructure WC-Co Cemented Carbide

A Plasticity Framework for Forming Applications

A Porosity Closure Model for the Integrated Casting and Forging Process of Aluminum Alloy and Its Application

A Predictive Strain-gradient Treatment with No Undetermined Constants or Length Scales

A Proposed Common Single-die Exchange Technique for Minimizing the Number of Installations in a Cold Forging Process of Pulleys

A Split-ring Test for Springback Measurement of QP Steel Sheets

A Study of Anisotropic Yield Function Based on J2 and J3 Invariants

A Study of the Forming Quality of Magnesium Alloy Cylindrical Parts with Inner Ribs by Induction-heating Assisted Spinning

A Study on Developing Advanced Design Formula for Heat Form Quench (HFQ®) of Complex-shaped Aluminium Panels

A Study on Tube Bending Die Design in the Tube-hydroforming Process

A Study on Unified Modelling of Hot Stamping Boron Steel Components with Controlled Microstructural Distribution for Optimised Crashworthiness

AA5754 Damage and Fracture Behavior Sensitivity to the Strain Rate Effect

Abnormal Plastic Flow and Fracture Behavior of Dual-phase Steels Induced by Dynamic Strain Aging

Accurate Mapping of Thermal Camera Measurements on Planar Deformations

Accurate Modelling of Flow Stress of AISI1025 at Room Temperature and Its Application to Precision Forging Simulation

Achieving an Interference Fit between Two Rings during Composite Ring Rolling

Achieving Dual-property from a Single Superalloy by Tailoring Its Second-phase Particles during Multi-step Plastic Forming with External Magnetic Field

Adaptive Manufacturing in Toolmaking through Cross-technology Process Chains

Adding Value by Advancing Metal Forming

Adjusting Product Properties by Deliberate Induction of Residual Stresses in Single Point Incremental Forming

Advanced Application of Al-Steel Hybrid Sheets for EV Battery Casing

Advanced Design of Work Roll Contours for Different Roll Mill Types

Advancements in the Simulation of Magnetic Pulse Forming Processes with FORGE(R)

Advances and Challenges in Computational Modeling of Impact Welding Process

Advancing the Accuracy of Computational Models for Double-sided Incremental Forming

Aging Hardening Response and Fracture Behavior of an Ultra-high Manganese Low-density Austenitic Cast Steel

An Application of Homogeneous Anisotropic Hardening Model to the Prestrained Hole-expansion Experiment

An Asymmetric Plasticity Constitutive Model Fully Coupled with Isotropic Ductile Damage for Failure Frediction of Mg Alloy AZ31B

An Enhanced Johnson–Cook Model for Describing Hot Deformation Behaviors of a Typical Al-Si-Mg Alloy

An Extended Ductile Fracture Prediction Model Considering Hydrostatic Stress and Maximum Shear Stress

An Extended GTN Ductile Fracture Model for a Broad Range of Stress States

An Improved Hot Stamping Process for Titanium Alloys by Fast Heating

An Investigation into the Influence of Interrupted Loading in Improving the Stretch-flangeability of Dual-phase (DP600) Steels

An investigation on formability of Ti6Al4V alloy in the three-layer sheet hot stamping process

An Upper Bound Analysis of Friction Stir Spot Welding Processes

Analysis of Anisotropy Behavior of Aluminium Alloys by Barlat´S YLD 2000-2D Yield Stress Function

Analysis of Creep Behavior of Magnesium Alloy Sheet (AZ31B) in Warm Forming

Analysis of Cross-hardening by High Resolution Orientation Imaging

Analysis of Cylindrically and Spherically Embossed Flux Barriers in Non-oriented Electrical Steel

Analysis of Influencing Factors on the Achievability of Bistable Fully Closed Shells by Semi-analytical Modelling

Analysis of Material Work Hardening and Fracture Strains for Sheet Metal Stamping Processes

Analysis of Microstructure Based Variational and Progressive Strain Hardening Behavior for Copper Single Crystal

Analysis of Orientation Behavior of Plate-like Particles in Differential Speed Powder Rolling

Analysis of the Influence of Joining Partners on the Residual Stress Distribution in Assembled Shafts

Analysis of the Microstructural Forming Behavior of 316L Metal Foils with Different Initial Grain Sizes for the Production of Metallic Bipolar Plates

Analysis of the Thermomechanical Flow Behavior of Carburized Sheet Metal in Hot Stamping

Analysis of Tube Spinning

Analysis of Work Hardening and Tribological Changes after a Gap Controlled Drawbead Passage

Analytical Model for Non-axisymmetric Deformation in Ring Rolling

Anisotropic Ductile Fracture Estimation of Diagonal Cracks in Flange-shaped Parts

Anisotropic Plasticity and Ductile Fracture of Titanium Alloy Sheet at Elevated Temperature: Characterization and Modeling

Anisotropic Plasticity and Fracture Behavior of AZ31B Magnesium Alloy Sheet

Apparent Anisotropy of Cubic Materials as a Function of Material and Boundary Value Problem Length-scales

Applicability of ALE Based FEM Methods in the Numerical Modeling of 3D Fine Blanking Processes

Application of Barlat´S YLD 2000-2D Yield Criterion to Predict the Anisotropic Response of Stainless Steel

Application of Servo Motion Curve to Square Cup Deep Drawing Process

Application of the Nondestructive Evaluation (NDE) Method to Evaluate the Sheared Edge Quality and Edge Cracking

Artificial Neural Network Approach for Predicting Yield Strength with Microstructure and Texture in Magnesium Alloys

Assessing the Accuracy of the Methods Used for Computing the Balanced Biaxial Yield Stress

Assessment of Influence of Damage on Component Properties by Model Predictions

Basic Study for the Controlled Adjustment of the Residual Stress State in Wire Drawing for Further Processing to Torsion Bar Springs

Basic Study for the Controlled Adjustment of the Residual Stress State in Wire Drawing Products for Further Processing to Torsion Bar Springs

Biaxial Tensile Test on Aluminum Alloy Sheet at Warm Temperature

Buckling in Highly Shaped Rolled Rings

Bulk Microforming From Sheet Metal - A Promising Approach for the Mass Production of Cold Formed Metallic Micro Parts

Calibration and Verification of Stress-strain Curve in High Strain Region of Mild Steel Sheet

Characterisation of Anisotropic Material Behaviour

Characterization of Mechanical Properties, Fracture, Microstructure for Aluminum Alloy under High-rate Electromagnetic Tensile Loadings

Closed-die Forging of Titanium and Nickel-based Superalloys

Co-extrusion of Compound-cast AA7075/6060 Bilayer Billets at Various Temperatures

Combined Computed Tomography and Numerical Modeling for the Analysis of Bending of Additively Manufactured Cellular Sheets

Comparative Study about Progressive Bending Characteristics of AHSS Dual Phase and UHSS Martensitic Steels

Comparative Study of Electrically-assisted Pressure Joining: Aluminum 6061-T6 Alloys and Copper C11000 Alloys

Comparison of Linear Regression and Neural Networks as Surrogates for Sensor Modeling on a Deep Drawn Part

Comparison of Plasticity and Fracture Behaviors of Conventional and 3rd Gen. AHSS

Comparison of Rolling Forces and Enlargement of Hot-rolled Strip Obtained from Experimental, Analytical and Simulation Models

Comparison of the Resulting Form Deviations on Discs from FEM and Real Rolling in Radial-axial Ring Rolling

Compatible Deformation and Ductility of Magnesium

Complementary Methods for Assessment of Residual Stress Fields Induced by Rotary Swaging of Steel Bars

Compression of C/Thermoplastic Printed Composite; Shaping Parameters and Material Health

Computational modeling of magnetic pulse dissimilar alloys welding: Aluminum Alloy 6082-T6 and HC420LA Steel

Computer Aided Modeling of the Hot Forming Staking Process Based on Experimental Data

Constitutive Hardening Model Development for Materials with Evolving Microstructural Phase Constituents

Constitutive Law Parameter Identification for Hot Forging Using Compression Experiments on Forging Presses

Constitutive Model and Plate Forging Ability of 5052 Aluminum Alloy under Different Temperatures

Constitutive Modeling and Processing Map of Ti-5Al-5Mo-5V-3Cr-1Zr Alloy during Hot Deformation

Construction of Material Constitutive Model under Ultrasonic Vibration

Control Theory for High End Press Brake

Crystal Plasticity Analysis of the Effect of Bi-modal Microstructure's Features of Titanium Alloy on Strain Localization

Cutting Blades for Food Processing Applications Manufactured Using Innovative Spin Forming

Decoupling of Adverse Effect of Inter-roll Thrust Force on Steering Control during Strip Rolling

Deformation Analysis in Ultrasonic-assisted Multi-stage Incremental Sheet Forming

Deformation Mechanism of the Tooth Material Filling for Precision Forging of Spur Gears

Deformation Mechanism Selection during Superplasticity Testing of Submicron AA 5083

Deformation Mechanisms in Tool-workpiece Asperity Contact in Metal Forming

Deformation Processing in Microgravity

Deformation Uniformity Control in Precision Forming of Thin-walled Parts under the Subregion Control of Flexible-die Property

Deforming Behavior in Magnetic Pressure Parallel Seam Welding

Deforming Nanometric Volumes at Large Shear Strains by AFM Scratching

Demonstration of the Potential of Multi-material Wire Arc Additive Manufacturing (WAAM) for Regenerative Surfacing of Hot Forging Dies

Dependence of Mesoscale Structure of Drawn High Carbon Steel Wire on Wire Diameter

Descriptions of Several Cyclic Plasticity Phenomena Based on Y-U Model: Elastic-plastic Transition, Closure of Stress-strain Loop and Ratcheting

Design and fabrication of a high-performance magnetic actuator for magnetic pulse welding of metal tubes with large diameters

Design of a New Cruciform-like Specimen for Combined Tension and Shear of Metal Sheets

Development and Implementation of Static Recrystallization Model of 6XXX Aluminum Alloy Using Industrial Experiments

Development of a Multi-cycle Hot Stamping Simulator to Study the Effect of Tool Temperature on the IHTC for Aluminium Alloys

Development of a New One-side Riveting Process for Dissimilar Metallic and Non-metallic Materials

Development of a New Printing Method Using Soft Material Tools

Development of a Special Cold Roll Bonding Technique for Fabrication of Al-Steel Layered Composites with a Wavy Interface

Development of Adhesion Preventing Method during Deep-drawing of Titanium Alloy Sheets

Development of Antiloosening Bolts Based on Innovative Double Thread Mechanism

Development of Automatic Design System for Closed Die Forging Process of Disk-shaped Products

Development of Compact Testing Apparatus for In-situ Micro-observation of Surface Roughness in Micro-forming process.

Development of Criteria for Strain Induced Oxide Layer Fracture during Cold Rolling of Aluminum

Development of Mechanical Cards for Finite Element Analysis of Mild Steels by Parameter Optimization

Development of Numerical Model Based Deep Learning for the Roll Force Prediction at the Sendzimir Mill

Development of Oil-type Lubricants for Cold Forging Using Phase Transition Behavior Under High-pressure Conditions

Development of Theory and Technologies for Hybrid Metal Forming Processes

Development of Warm Press Forming Process Method of Ti-6Al-4V Alloy Sheet

Direct Measurement of Stiction/Friction Forces during Microscale Metal Forming Processes: Effects of Size and Surface Coatings

Directional Distortional Hardening of Mg Alloys under Bi-axial Tensile Test

Ductile Fracture Behavior at Micro/Meso-scale in Ultrafine-grained Materials

Ductile Fracture in Flow Spinning of Aluminum Alloy Thin-walled Tubular Parts with Longitudinal and Transverse Inner Ribs

Ductile Fracture Prediction of Hot Stamped Boron Steel 22MnB5 with Modified Mohr-Coulomb and Hosford-Coulomb Models

Dynamic Recrystallization Behaviors of 5083 Aluminum Alloys with Different Initial Microstructures under Hot Compression

Dynamic Recrystallization Characteristics of GH4169 Superalloy with Different Initial δ Phase during Hot Deformation Accompanied by Changed Strain Rate

Effect of a Rapid Aging Treatment at High Temperatures (TERAT) on the Mechanical and Structural Properties of Alloy 6201

Effect of Anisotropy Evolution on Several Sheet Metal Forming Processes

Effect of Bending Intensity on Straightness in Spinner Straightener

Effect of Blanking on Magnetic and Mechanical Properties of Non-oriented Electrical Steel

Effect of Cold-rolling Deformation on Microstructural Evolution, Mechanical Properties and Deformation Behavior of Ultra-low Carbon Medium Mn Steel

Effect of Continuous Extrusion Forming on Microstructure of Copper Bar

Effect of CZM Parameters on Delamination Behavior of Laminated Metal Sheet with Thin Adhesive Layer in V-die Bending Test

Effect of Deformation Parameters on Microstructure of 6082 Aluminum Alloy Undergoing Deformation-solution-aging Process

Effect of Delivery Angle on Longitudinal Buckling in Temper Rolling of Thin Steel Strips

Effect of Expansion Ratio on Formability in Tube Drawing with Diameter Expansion

Effect of Feed Rate on Texture Evolution of 42CrMo Casting Blank during Hot Ring Rolling

Effect of Ferrite Rolling Temperature on the Microstructure and Properties of an Ultra-low Carbon Steel Produced by CSP Process

Effect of Friction Extrusion Parameters on Microstructure, Texture and Properties of Two Precipitation Hardened Al Alloys

Effect of Machining Induced Microstructure Changes on the Edge Formability of Titanium Alloys at Room Temperature

Effect of Microscopic Sine Profile of the Work Roll Surface on the Material Behavior during Cold Rolling of Al Sheets

Effect of Production Rate on Lubrication Performance in Combined Forward-Can and Backward-Can Cold Extrusion Test

Effect of Pulse Current on Mechanical Properties and Microstructure of Ultrahigh Strength Steel

Effect of Short Pulsed-current on Stress Relaxation in Uniaxial Tensile Test

Effect of Slide Motions on Drawing Depth and Thickness Variation of Pure Titanium in Servo Press Microforming

Effect of Superimposed Pressure on the Plasticity, Localization and Fracture of Aluminum Alloys

Effect of the Slider Motion of Servo-press on the Spring Back of Bending with High Strength Aluminum Sheets

Effect of Width-to-thickness Ratio of Product on the Quality of Welding Properties of AA6063 during Continuous Extrusion with Double Billets

Effects of Combined Extrusion and Forging Process on Microstructure and Mechanical Properties of Al/Mg/Al Sheet

Effects of Heat Treatment Temperature and Holding Time on Microstructure Evolution and Microhardness of SAF2205 Duplex Stainless Steel After Cyclic Torsion Deformation

Effects of Microstructure on Mechanical Properties of MAX Phase Reinforced Aluminum Matrix Composites by Micro-indentation

Effects of Press Ram Vibrations on the Production Quality

Effects of Process Parameters on the Peeling Strength of Warm Roll-bonded AL1100/Polyurethane/AL1100 Sandwich Composite under Static/Cyclic Loading

Effects of Process Parameters on the Peeling Strength of Warm Roll-bonded AL1100/Polyurethane/AL1100 Sandwich Composite under Static/Cyclic Loading

Effects of Processing Parameters on Microstructure Evolution of 300M Ultrahigh Strength Steel during the Combined Additive Manufacturing and Forging Process

Effects of Residual Strain on Grain Growth of Extruded Aluminum Micro-channel Tubes during Heat Treatment

Effects of Servo Press Forming on Various Strain Path Failures

Efficient Evaluation of Springback in Spatial Bending of Superalloy Helical Tubes

Elastoplastic Finite Element Analysis of Multi-body Processes for Joining Mechanical Parts

Electric Pulse Sprigback Reduction on AA5754 Forming

Electrically Assisted Pressure Joining of Cylindrical Steel Bolt and Steel Plate

Electrically Assisted Solid-state Joining with Plastic Deformation: Dissimilar Stainless Steel Joints

Elimination of Deformation Localization in the Forming of Fuselage Profiles with Variable Bending Curvatures and Sections Employing the Novel Friction Assist Stretch Bending Method

Energy-dependent Surface Integrity of Stainless Steel AISI 304 after Robot-based Machine Hammer Peening

Enhancing Tool Life by Manipulating the Punch & Die Elastic Strain Field during Forging

Estimation and Prevention of Strain Localization in Shear Tests

[Replication or Save Conflict]

Evaluating 980 GEN-3 Steel with Tested and Numerical Forming Limit Curve

Evaluating an Automated Avoidance of Ring Climbing in Radial-axial Ring Rolling

Evaluating the Reliability of a Nondestructive Evaluation (NDE) Tool to Measure the Incoming Sheet Mechanical Properties

Evaluation of isotropic and anisotropic constitutive models on plasticity prediction of AA7075 extruded tube under Tension-Tension and Tension-Compression

Evaluation of Lubricant Performance for Thick Sheet Ironing Process by Ball Ironing Test

Evaluationg of Press Forming Technique for Bent Automotive Body Parts Using In-plane Shear Deformation

Experimental Analysis on Granular Media Based Tube Forming with Active Axial Feed

Experimental and Numerical Investigation of Thermal Self-piercing Riveting Joint Performance of AA7075-T6 Aluminum Alloy

Experimental and Numerical Investigations into the Influence of the Process Parameters during the Deep Drawing of Fiber Metal Laminates

Experimental and Numerical Investigations on the Development and Stability of Residual Stresses Arising from Hot Forming Processes

Experimental and Numerical Studies on Plastic Deformation and Failure Behavior of Carbon Nanotube Reinforced Al Composite Sheet under Uniaxial Loading Condition

Experimental Assessment and Numerical Analysis of the Pillow Effect in Double-sided and Two-point Incremental Sheet Forming Processes

Experimental Characterization of Plasticity Increment Induced by TRIP and Its Dependence on the Annealing Temperature in Lean Duplex Stainless Steel

Experimental Implementation of SS 316L Cruciform Testing to Achieve Various Deformation Paths

Experimental Investigation and Constitutive Modeling of Dynamic Behavior and the Anisotropic Response of High-strength Lightweight AL-Li Alloys Sheets

Experimental Investigation of Component Contour and Cutting Offset on the Edge Fracture Behavior Using a Two-stage Shear Cutting Process

Experimental Investigation of Different WAAM (Wire-Arc Additive Manufacturing) Processes and Their Influence on the Component Properties and Formability

Experimental Investigation on Springback Behavior of Dual-phase Steel in Warm Forming

Experimental Investigation on the Forming Limit of AZ31 Alloy by Temperature-controlled Incremental Forming

Experimental Investigations for Stretch Bending of Extruded 7075 Aluminum Alloy Profile with Y-section

Experimental Research on Mechanics Response of Q235 Steel under Stress Cyclic Loading

Experimental Study and Analysis on the Effects of Cyclic Bending on the Stress-strain Curves of Aluminum Plate

Experimental study and modelling of stress relaxation ageing behaviour and post-form mechanical properties in creep age forming of Al-Zn-Mg alloy

Experimental Study of Asymmetric Rolling of Aluminum Alloys

Experimental Study on Texture Evolution of Mg-Y Magnesium Alloy in Extrusion

Experimental Study on the In-plane Torsion Test for Sheet Metal

Experimental Study on Uniaxial Strain Cyclic Behavior of GS-20Mn5

Exploring the Fragmentation of Surface Films during Solid State Welding

Extrusion Technology of High-performance Aluminum Alloy Profiles with Large Complex Section

Fabrication of NiAl/TiAl-based Gradient Alloys by Additive Sintering

Failure Behavior of Cladded Steels during Bending – Experiment and Simulation

Fast Development of New Alloys for Metal Forming Using Additive Manufacturing

Fast Development of New Alloys for Metal Forming Using Additive Manufacturing

Fatigue Characteristics and Failure Mechanism of Self-piercing Riveting DP590 and AA6061 Plates

FE-based Investigation on the Influence of Inhomogeneously Heated Billets on Subsequent Forging Processes

FE Simulations of Piercing and Trimming of Al Alloys and AHSS

FEM Analysis on Multi-pass Wiredrawing Process of Ultra-fine Steel Wire: Investigation on Stress, Strain and Hardness

Fine-piercing of Electrical Steel Sheets by Edge-sharpened Diamond-punch

Finite Element Analysis and Comparison of Sheet Flatness during Symmetric and Asymmetric Cold Rolling

Finite Element Analysis of Die Quenching 22MnB5 Steel Sheets

Finite Element Method Based on Space Mesh

Finite Element Modeling and Control of the Forming Temperature in Electrically-assisted Double Sided Incremental Forming

Finite Element Simulation and Die Design for Tube Hydro-piercing

Finite Element Simulation of Edge Fracture by Mapping the Shear-induced Ductile Damage into Hole-expansion Simulation

Flexible Manufacturing of Concave-convex Parts by Incremental Sheet Forming with Active Medium

Flow Behavior and Processing Map of a Nickel-based Superalloy during Hot Plastic Deformation Process

Fluidity of the Wood Composite Combined with Natural Binder on Injection Molding

Folding-shearing to Produce an Isolated Shrink Corner

Force-controlled Toolpaths in Metal Spinning

Formability Analysis of a Local Heat-treated Aluminium Alloy Thin-walled Tube

Formability and Damage-resistance of Laminated Steel Sheets with Non-ideal Interface Bonding

Formability Improvements at Room Temperature of AA5754-H32 via Continuous Bending under Tension (CBT) and Pre-forming Heat Treatment

Formability of Functional Corrugated Cup

Formation of Residual Stresses in Austenitic Stainless Steels by Infeed and Recess Rotary Swaging

Forming-induced Distortion of Dissimilar Ti-Al Laminated Composite Plate after Non-equal Channel Lateral Co-extrusion

Forming-induced Residual Stress Influence on Material Properties of Roll-Formed High Strength Martensite Steels

Forming Limit Results Comparing the Bragard Technique with a Statistical, Deformation-history Analysis

Forming of Metallic Membrane by Layered Deep Drawing

Forming of Parts with Locally Defined Mechanical and Ferromagnetic Properties by Flow-forming

Forming of PMMA Sheets by Lap Incremental Forming with Local Friction Heating

Forming of Spur Gear by Combination of Divided Flow Forging and Slide Motion by Using Liquid Lubricant

Forming Surface Texture on Copper Sheets by Electrically-assisted Micro-rolling

Forming the Future – Metal Forming, Innovation for Sustainability

Fretting Damage and Fatigue Property Analysis of Self-piercing Riveted Joints of AA5052 Aluminium Alloy

Friction and Thermal Insulation: Influence of Oxide Scale on Hot Forging Sequences

Friction Based Solid State Recycling: An Industry-ready Technology?

Friction Law in Cold Metal Forming

Friction Stir Welding Applied in Joining of Wrought Homogenized Armor Steel

Friction Welding with a Metal Powder Interlayer

From Bridge to Bumper – Utilization of Pre-stressing during Manufacturing of Hybrid Sheet Metal Structures

Fundamentals of Continuous Helicoid Auger Flighting Rolling - Deformation Mechanics, Kinematics and Applications

Galling-free Micro-forging of Titanium Wire with High Reduction in Thickness by Beta-SiC Dies

General Step Reduction and Enlargement Method for Knowledge-based Process Planning of Totally Non-axisymmetric Forged Products with Blanking and Punching

Generation of Locally Adjusted Tailored Properties in High-strength Steels Using Contact Heating during a Press Hardening Process

Geometry Representation Techniques for Machine Learning Application in Incremental Sheet Forming

Grain size effect on formability in electromagnetically-assisted micro-bulging of pure titanium sheet

Grain Size Effect on the Ductile Fracture of Steel in Hot Deformation

Hardening/Softening Characteristics of a TRIP-assisted Duplex Stainless Steel under Cyclic Deformation

Heterogeneous Deformation in (α+β) Titanium Alloys: Iin-situ Explorations of Strain Localization and Its Governing Deformation Micro-events

High-speed Full-field Deformation Measurement of Multi-stage Shear Cutting

High-speed Material Characterization Using an Instrumented Forging Hammer

High-temperature Properties of Hot-work Tool Steel (AISI H13) Deposited via Direct Energy Deposition

Hole Expansion Simulation of Steel Sheet Considering Differential Hardening

Hot Cutting of Press-hardened Parts in Different Heat Treatment Regimes

Hot Deformation Behavior and Constitutive Modeling of a Novel Ni-based Superalloy

Hot Deformation Behavior of Aluminum-matrix Composites Reinforced with MAX Phase in Situ by Synthesis and Sintering

Hot Ring Rolling and Cold Expanding Strengthening of Mn18Cr18N Thick-wall Hollow Ingots

Hydro-mechanical Deep Drawing of Locally Solution Treated Aluminum Alloy Sheets

Identification of the Anisotropic Plastic Constitutive Parameters Using the Virtual Fields Method for AZ31B Magnesium Alloy

Image Feature Analysis for Magnetic Particle Inspection of Forging Defects

Impact of the Temperature Field of a C38 Steel Slug on its Thixoforging: Experiments and Simulations

Improvement of Formability of Advanced High-strength Steels: Effect of Local Stress Partitioning and Plastic Anisotropy on Residual Stress Concentration

Improvement on Buckling Limit of Thick Tube in Axial Compression

Impulse-based Residual Stress Relief

In-plane Stretch-bending Test for Determination of Large-strain Workhardening and Fracture of Sheet Metals

In Search of the Perfect Sheet Metal Forming Tribometer

Increased Resistance to Mixed-mode Cracking in Sharp Edges through Severe Plastic Deformation

Incremental Collar Forming Process for the Manufacturing of Branched Tubes and Pipes

Incremental Grooving of Thin-walled Tubes Filled with Discrete Media

Industrial Conform Experimental Methods for the Determination of Forming and Fracture Limits in Complex Bulk Forming Processes

Influence of Axial Feed-rate on Shape and Thickness Changes during Multi-pass Tube Spinning: Experiments and Modelling

Influence of Deformation on Texture Development during Cold Drawing of Tubes

Influence of Forming Conditions on Metal Flow and Lubrication in Cold Backward-cup Extrusion

Influence of Loading Path Change on Fracture of an Aluminum Alloy

Influence of Material Delivery Condition on Residual Stresses and Part Properties during Forward Rod Extrusion

Influence of Quenching Temperature on Microstructure and Mechanical Properties in Cu-containing Quenching and Partitioning (Q&P) Steels

Influence of Sample Shape on Distributon Uniformity of Shear Stress in Pure Shear Test of Tubes

Influence of Shear Cutting Process Parameters on the Residual Stress State and the Fatigue Strength of Gears

Influence of Specimen Preparation Methods on the Mechanical Properties and Superplastic Behavior of AA5083 Sheets

Influence of Strain on the Site Occupancy of Hydrogen in Alpha- zirconium from the First-principle Calculations

Influence of the Process Parameters on Orange Peel Effect in AZ31 Warm Incremental Forming

Influence of the Quenching Rate and Natural Ageing Duration on the Formability and Mechanical Properties of EN AW-7075

Influence of Ultrasonic-assistance on the Forming Limits of Steel

Influences of Key Forging Parameters on Cold Orbital Forging of Thin Parts with High Circular Ribs

Inline Combination of Flow Forming and Radial Profiling for the Production of High Accuracy Profiled Hollow Parts

Innovative Simulation Strategy for the Mastering of Tribological Surface Transformations

Instability Analysis in Incremental Rotary Forming of Tube Flanges

Intelligent Materials Testing for Hot Forming of Aluminium Sheet Metal

Introduction of a New Method for Continuous Aluminum Hot Extrusion

Investigating Plastic Anisotropy of Al7079 Using Crystal Plasticity Simulations

Investigation into Microstructure Evolution during Hot Compressions of Mg-Al-Zn-RE Alloy

Investigation of a Novel Constructive Hot Ring Rolling Process for Double Metal Composite Ring

Investigation of an Integrated Process for Bending and Cross Section Forming of Tubular Lightweight Parts Based on a Working Media Made of Materials with High Plasticity

Investigation of Directional Effects of Deep Rolling Process on Plastic Deformation and Residual Stresses Using Finite Element Analysis

Investigation of Effects of Part Features in Single Point Incremental Forming of Narrow Channels

Investigation of Failure Mechanisms of Cemented Carbide Fine Blanking Punches by Means of Process Forces and Acoustic Emission

Investigation of Forward–Backward-Radial Extrusion Process of Aluminum Alloy Wheel Hub

Investigation of Machine Learning Models for a Time Series Classification Task in Radial-axial Ring Rolling

Investigation of Multi-layered Sheets Formability Manufactured by Accumulative Roll Bonding

Investigation on Austenite Transformation Kinetic Mechanism of Ultra-high Strength Steel by Rapid Heating

Investigation on Dynamic Recrystallization Behavior of a Typical Ultrahigh Strength Steel by Cellular Automaton Simulation

Investigation on Springback Behavior of Multi-intersecting High Stiffened Structure in Die Forming

Investigation on Stress-relaxation Ageing Behavior and Mechanical Properties of AA2219 Alloy Under Different Pre-deformations

Investigation on the Evolution of Damage and Microstructure in Hot Flat and Caliber Rolling of Steels

Investigation on the In-plane Anisotropy and Tension-compression Asymmetry of Twin Roll Cast and Hot Rolled AZ31 Magnesium Alloy Thin Sheet with Modified Sample Geometry

Investigation on the Whole Forming Process of Super-large Flat Ring

Investigations and Applications of Multi-stage Semisolid Forming on Manufacturing of Ferrous and Non-ferrous Alloys Components

Investigations and Improvements in 3D-DIC Optical Residual Stress Analysis – A New Temperature Compensation Method

Investigations on Dynamic Characteristics of a Mechanical Press Considering Both Translational Clearance Joint and Lubrication Effect

Large Strain Flow Curve Determination for Sheet Metal

Limit Rolling Forming of Pulsed Electric Current Excitation Stainless Steel Foil Strip

Liquation Cracking Susceptibility of FeMnAl Alloys for Armor Applications

Local Creation of Uniform Residual Stresses into Sheet Metal Components by Means of Multiple One-sided Embossing

Local Microscopic and Integral Macroscopic Analysis of Magnetic Pulse Welds and Deformations for Dissimilar Metal Joints

Localized Adjustment of the Tribological System via Porous Tool Inserts Generated by Laser Beam Melting (LBM)

Localized Contact Pressure of Blankholder for Stamping Irregular Sheet Parts by Configuring the Height of the Supporting Elements

Low Temperature Forging of High Strength CP Ti

Machine Learning Based Prediction and Compensation of Springback for Tube Bending

Macro- and Micromechanical Investigations on Residual Stresses in Extruded Components

Macro Deformation Characteristics of Medium Mn TRIP Steel Affected by Loading Stress States and Phase Transformation

Manufacturing of Circle Knife Blades with Modified Spin Forming Process

Manufacturing of Shape Memory Alloy Pipe Coupler: Modeling and Application

Manufacturing of Tailored Blanks with Pre-shaped Involute Gearings by Using a Flexible Rolling Process and Its Application in a Sheet-bulk Metal Forming Process

Manufacturing Processes of Non-metallic Materials

Material Characterization and Numerical Modeling of Incremental Forming Processes

Mathematical Model and Quantitative Analysis of Residual Stress Hole during Laser Shock Peening

Measurement of the Residual Stress in Tube Spinning Process by Using Slitting Method

Mechanical Behavior of Third Generation Advanced High Strength Steel under Simple Shear and Reverse Loading: Experimental and Theoretical Approach

Mechanical Properties of Aluminum-stainless Steel Bimetal Composite Fabricated by Extrusion Process

Metal Foils for Bipolar Plates – Correlation of Initial Grain Size and Forming Behavior of 316L

Methods and Mechanisms to Uniformly Refine Deformed Mixed and Coarse Grains Inside a Solution-treated Ni-based Superalloy by Heat Treatment

Methods for Increasing the Durability of Forging Tools - Comprehension Review and Outlook

Microscale Pattern Replication in Aluminum: Mechanical Response and Incomplete Die Filling in a Double-punch Molding Configuration

Microstructural Evolution of Ti-55511 Titanium Alloy during Quasi-beta Forging

Microstructural Influences on Grain Boundary Sliding in High Purity Aluminum

Microstructure and Mechanical Properties Evolution of Pure Ti microtube in Cyclic Rotating Bending Process

Microstructure and Mechanical Properties of 5CrNiMoV Steel under Inhomogeneous Deformation

Microstructure and Thermomechanical Properties of AA7075 Sheet Metal Processed by ECAP

Microstructure Evolution during Isothermal Forging of 7A85 Aluminum Aviation Component

Microstructure Evolution of 300M Steel in Dynamic Recrystallization Investigated by In-situ and Ex-situ Experiments

Microstructure Evolution of AA-7075 Sheets Subjected to Repetitive Bending under Tension

Microstructure Informed Deformation and Fracture Model for High-strength Steels

Modeling and Experimentation of Microcontact Tool/Chip during the Micromachining Process

Modified Slip-line Model for Serrated Chip Formation in Machining of Ti6Al4V Alloy

Multi-field Simulation of the Autoclave Age Forming Process of 2524 Al Alloy Component

Multi-objective Optimization of Elbow-bar Transmission Mechanism Based on Virtual Prototyping

Multi-scale Modeling of Zirconium Alloys Recrystallization, Application to Thermo-mechanical Processes Optimization

Multi-scale Plasticity Modeling for Sheet Metal Forming Considering Texture Gradient and Microstructural Statistics

Multi-step Single Point Incremental Forming Strategies for Non-axisymmetric Components

Multiscale Modeling of Self-piercing Riveting Process

Neural Network Surrogates Model for Metals Undergoing Yield Point Phenomena within Finite Element Analysis

New Generation Press Hardening Steels with Tensile Strength of 1.7-2.0GPa and Enhanced Bendability

New Methods for Fracture Detection of Automotive Alloys in the VDA238-100 V-Bend Bend Test

New Methods for Fracture Detection of Automotive Steels

Non-isothermal modeling of static recrystallization in hydroformed steel tube using a coupled Cellular Automata and Finite Element model

Nonlinearity of the Crystal Yield Function in the Rate-independent Crystal Plasticity and Its Effect on the Evolution of Anisotropy

Novel Concepts to Optimize Pass Schedules for Rolling in the Context of Ongoing Digitalization

Novel Roll Bonded Stainless Steel / Boron-steel Multilayer under Hot Stamping Conditions

Numerical and Experimental Investigations on Riveting Assembly Processing Parameters of Hub Bearing Unit

Numerical and Experimental Study of Abrasive Belt Grinding for Single Crystal Aero-engine Blades

Numerical Modeling of Ductile Damage during Metal Forming: State of the Art and Future Challenges

Numerical Modelling and Deformation Mechanics of the English Wheel Process

Numerical Modelling and Experimental Investigations of Steel and FRT Considering a Combined Forming Process

Numerical Modelling of the Flow Forming Process: Computation Time Optimization and Accuracy Analysis

Numerical Simulation of Pipe Bending Supported by Hydraulic Pressure for Manufacturing Butt-welding Fittings

On Deformation of Metals under Complex Loading

On Edge Crack Initiation of an Aluminum Sheet Metal

On Sampling Discrete Orientations for Texture Representation in Aggregates with Varying Grain Size

On the Characterization of Fracture Loci in Thin-walled Tube Forming

On the Convexity Bound of the Generalized Drucker's Yield Function CB2001 for Orthotropic Sheets

On the Determination of the Forming Limits by Necking and Fracture of Polycarbonate Sheet

On the Formation of Shear Bands and Fracture in Cutting of Metals

On the Geometrical Accuracy in Incremental Sheet Forming

On the Newly Proposed Shear Constraint for Orthotropic Plasticity Modeling of Sheet Metals

On the Potential of Machine Learning Algorithms to Predict the Plasticity of Sheet Metal

On the Simulation of Quenching Processes Using a Full Eulerian FE Framework

Open-die Forging of Copper Cone

Optimization in Mechanical Properties of Multilayered 1100/7075 Aluminum Alloy Laminated Metal Composite Fabricated by ARB

Optimization of Lattice Structures for Additively Manufactured Interpenetrating Composites

Optimization of Open-die Forging Using Fast Models for Strain, Temperature and Grain Size in the Context of an Assistance System

Oscillation-free Determination of Material Properties at High Strain Rate

Partial Dislocation Slip-induced Mechanical Twin Evolution of Single Crystal Using Discrete Dislocation Plasticity Model

Penetrating Tool Friction Stir Incremental Forming Using Alternating Tool Path Direction

Phase-field Modelling of Ductile Fracture to Describe Edge Conditions in Local Formability Studies

PID Controller Integrated with FEM Model to Generate Boundary Conditions for Free Tube Bulging for Tubular Material Characterization

Plane Strain Analysis of Sheet Metals for Constitutive, Formability, and Fracture Characterization

Plastic and Fracture Characteristics of WE43 Mg Alloy Under Complex Stress States

Plastic Behavior Characterization of Magnesium Alloy Sheets Based on Mesoscale and Macroscale Models

Plasticity and Ductile Fracture of Ultra-high Strength Steel Sheets under Complex Stress State: Experiments and Modeling

Plasticity Improvement of CNTs/Mg Nanocomposite Materials Processed by Combining Friction Stir Processing and Ultrasonic Assisted Extrusion

Possibility of Shear Forging as the Third Basic Process of Cold Forging

Pre-forging Shape Design Using Conformal Mapping Method

Precipitation and Orientation Evolution Mechanisms of α Phase in Ti-55511 Titanium Alloy

Predicting Fracture of Severe Pre-strained EN-AW 5182 during Hot-stamping Operations: A Thermal Extension of GISSMO and the Hosford-Coulomb Fracture Model

Prediction Limits of Air Bending

Prediction of Forming-induced Damage in Deep Drawing of Dual Phase Steel via Coupled Plasticity-continuum Damage Mechanics

Prediction on Microstructure of Large Scale Hot Forged Ni-based Super Alloy

Predictive Model for the Strength of Self-piercing Riveted Joints

Preform Shape and Die Wear Optimization of Near Net Shape Forging of Gear Part

Prevention of Delayed Cracking of Punched Ultra-high Strength Steel Sheets by Ironing with Scrap

Process Development for Mechanical Joining of Aluminum Alloys and Thermoplastics Using High-frequency Preheating

Process Optimisation Using a Data Guided Online Platform

Processing Path Design in Multiphase Structures

Professor Ruan and the International Cold Forging Group (ICFG)

Professor Z.R. Wang's Contributions to Metal Forming Theory, Technology and Education

Prof. Yasuhisa Tozawa's Achievements in the Field of Metal Forming

Pushing Forward the Limit of Transformation-induced Plasticity (TRIP) Effect: Nnew Strategies in Mechanically Metastable Alloy Design

Rate Dependent Hardening Behavior of Autobody Sheet Metals in Tension and Compression

Recent Advances in Sheet and Tube Hydroforming

Recent Advances on Modeling Plastic Deformation of Textured Metals with Applications to Metal Forming

Recent Investigations on Incremental Sheet Forming: From Fundamentals to Industrial Application Technologies

Reducing aluminum extrusion transverse weld process scrap

Relating Microstructure to Deformation in Al Alloys via Multiscale Electron Microscopy

Relaxation Characteristics of Creasing Process of Scored Paperboard for Liquid Container

Research of Press Forming of CFRTP under the Control of a Distribution of Temperature and Blank Holder Force

Research on Crack Evolution Behavior in Ti/Al Laminated Composite

Research on Microstructure Revolution and Critical Strain of Dynamic Recrystallization of 6082 Aluminum Alloy in Thermal Deformation

Research on New Hot Stamping Tool with Low Cost and High Efficiency Cooling

Research on Rolling Process and Superplasticity for 5A90 Al-Li Alloy

Research on the Dynamic Recrystallization Model and Microstructure Simulation of Cr8 Alloy Steel

Research on the Forming Mechanism of the Haynes 230 Alloy Conical-cylindrical Parts Manufactured by Composite Spinning

Research on the Mechanism of Pulse Current Assisted Titanium/Stainless Steel Rolling

Research on the Thermoplastic Formability of Lightweight Ti-based Bulk Metallic Glasses

Research Progress on Advanced Forming and Performance Strengthening of Complex Thin-walled Aluminum Alloy Components

Residual Stresses in Hot Bulk Formed Parts – A Phenomenological Approach for the Austenite-to-Martensite Phase Transformation

Rim Thickening of Disk-like Parts Using Spinning

Robotic roller forming process and strategies to eliminate geometrical defect of edge waves

Role of Misorientation on Grain Boundary Sliding through High-Resolution Digital Image Correlation

Roll Forming of Cup with Curved Rotary Profile

Roll Pass Optimization of Round Bar Continuous Rolling

Rolling Machine Modification for Large Gear Applications

Self-optimized, Intelligent Open Loop Controlled Steel Strip Straightening Machine for Advanced Formability

Self-piercing Riveting Using Rivets Made of Stainless Steel with High Strain Hardening

Shaping of Sharp-edged Design Elements by Electromagnetic Forming

Shear Punch Test to Assess the Shear Formability of 304 Stainless Steel

Simulated Microstructure Effects on Macroscopic Mechanical Properties Based on Multiscale Crystal Plasticity

Simulation and Experimental Analysis of Magnetic Pulse Spot Welding of Sheet Metal with a Field Shaper

Simulation of Cold Forging Processes Using a Mixed Isotropic-Kinematik Hardening Model

Simulation of Plastic Deformation Induced Texture Evolution Using the Crystallographic Homogenization Finite Element Method

Simulation on Dynamic Recrystallization of Magnesium Alloy by Cellular Automaton Method Coupled with Adaptive Activation Energy and Matrix Deformation Topology

Simulation Study on Hot Rolling of Bimetallic Casting Ring Blank

Simulations of Grain Growth with Arbitrary Grain Boundary Energy

Size Effect on Cyclic Deformation Behavior and Springback Prediction of Ultrathin Superalloy Sheet

Spot Butt Friction Stir Welding of Thin Stainless Steel Sheets

Spring-back Prediction of U-section Curve Beam in the Stamping process

Springback Prediction in Microbending Process of Pure Copper Foils Using Modified Material Intrinsic Length in Material Model

State of the Art in Finite Element Modeling of Ring Rolling Processes

Statistical Analysis of Microscopic Strain Localization and Its Strain Level Dependence

Strain-rate-sensitivity Calibration of Aluminum Alloy Sheet by Electromagnetic Flanging of Circular Hole

Strain Hardening of AA5182-O Considering Strain Rate and Temperature Effect

Strain Rate Dependent Damage and Failure Modeling of a Quenched-and-partitioned Steel

Strength Prediction Model for Line Pipe Steels Subject to Multiple Deformation Paths

Stress-based Ductile Fracture Criterion for Nonlinear Strain Paths with Model Calibration

Stress-relaxation Age Forming of A Component with Complex and Large Curvatures: Simulation and Manufacturing

Study of Central Bursting Defects in the Process of Cross Wedge Rolling for TC4 Alloy Part

Study of Hydrogen Embrittlement Behavior of Hot-stamped Ultra-high Strength Steel

Study of the Influence of the Mixed-grain Structure on the Microscopic Deformation Behavior of 316LN Steel

Study on Back-propagation Artificial Neural Network Model of TC4 Titanium Alloy

Study on Burring Operation During the Quenching Process of Press-hardened Steel For Mechanical Fastening

Study on Complex Extrusion of Multi Billets: Evaluation of Mechanical Properties of Butt-joined Products and Analysis of Joining State

Study on Microstructure Profile of the Formed Magnesium Alloy

Study on Precision Forging Methods of Difficult-to-knockout Components with Non-parallel Internal Grooves

Study on the Effect of Embossing on the Bending Properties of High Strength Sheet Metals

Study on the Transferability of Rolling with Ordered Texturing Roll

Superplastic Forming Application in CubeSats Structures

Surface Quality of Extruded Sidewall in Cold Backward Cup Extrusion with Low-frequency Torsional Oscillation

Surrogate Modelling of Search Range in Polyhedron Flow Stress Model Identification with Inverse Analysis and Cylindrical Compression Test

T8 Heat Treatment Effect on Wear Behavior and Microstructure of Cryo and RT Ecaped Al 6063

Tailoring Material Flow in Bobbin Tool versus Standard in Friction Welding: Avoiding Premature Failure and Improving Mechanical Properties in FSW AA6082-T6

Temperature and Deformation Modeling for the Friction Stir Welding Process in AZ31 Magnesium Alloy

Temperature Dependent Fracture Loci Of AZ31 Magnesium Alloy Sheets

Tensile Mechanical Properties of Steel-Al Explosion-bonded Clad Plate

Testing Method of Anti-galling Ability of Lubrication Coatings in Multi-stage Cold Forging

Texture Evolution in the Micro-scaled Deformation of Pure Titanium

The Deformation and Microstructure Analysis of Medium Carbon Steel during Die Forging Process and the Effect of Microalloying Elements

The Dieless Drawing Process for the Elongation of Ultrafine Copper and Brass Wire

The Effect of Crystallographic Texture Gradients on the Mechanical Response of Aluminum Automotive Extrusions

The Effect of Electroplasticity on the Flow Behavior of AA7075 in T6 Temper

The Effect of Interface Cohesion on Layer Stability during Accumulative Roll Bonding of Cu/Ta Multilayers

The Effect of Temperature on Strain-induced Austenite to Martensite Phase Transformation in SS 316L during Uniaxial Tension

The Effect of Trace Nitrogen on Microstructure and Property of Cr-Mo-V hot-working Die Steel

The Effect of Ultrasonic Vibration on Material Movement in Incremental Sheet Forming

The Effects of the Shearing Speed on the Sheared Edge Quality and Edge Cracking

The Evolution of Deformation Microstructures and Strain Hardening during Constrained Sliding with Implications for Metal Forming and Cutting Processes

The High-Speed Deformation Behavior of High-Strength Lightweight AL-Li Alloy Sheets

The Influence of Size Effect on Shear Damage of Metallic Materials in Micro/Meso Scale and Low Triaxiality Plastic Deformation

The Influence of Temperature and Strain Rate on the Superplastic Deformation Behavior and Microstructure Evolution of TNW700 Alloy

The Local Strain Evolution for Structured Sheet Metals during Uniaxial Deformation

The Mechanism Investigation of Deformation-induced Martensite Transformation in a Novel Low-Ni High-Mn Austenitic Stainless Steel

The Modification of Hill’s 48 Yield Criterion for the Strongly Anisotropic Al-Mg-Li Sheet and Its Application in Predicting the Forming Limits

The Process Design to Control the Yield Ratio of Yield-Ratio-Control-Steel on Both Wire Production and Forging Process

The Rolling Process for Thin-walled Ring with Island Bosses on Outer Surface

The Study of Energy Absorption of Dual-material Tailored Plane Strain Sheet

The Study of Microstructure ASTM 1045 after Surface Plastic Deformation Multiradius Roller (MR-roller)

Theoretical and Experimental Determination of the Peak Pressure of the Impact Hydroforming Technology

Thermal-mechanical Property and Microstructure Evolution of Additive Manufactured Maraging Steel

Thermal Relaxation of Cold-rolled Copper Based on Modified Power Law Creep Model

Thermomechanical Analysis and Experimental Validation of ECAP for Aluminum Sheet Metal

Three-dimensional Analysis of Strip Rolling by Coupling Elastic Deformation of Rolls and Rolling Mills

Titanium Alloys Lined and Clad Construction, Process Challenging and Improvement

Toolpath Development for Industrial Mandrel-free Spinning

Topological Deformation and Nucleation in Dynamic Recrystallization Numerical Simulation Based on Multi-space Cellular Automata Method

Towards an Efficient Industrial Implementation of W-temper Forming for 7xxx Series Al Alloys

Towards Room-temperature Forming of Magnesium Sheet Alloys

Transcription of Mirror-finished Surface onto A5083 Aluminum Alloy Plate by Friction Stir Forming

Transformation of α→β during Hot Deformation in the Two-phase Region of Ti-6Al-2Zr-1Mo-1V Alloy

Tribological Conditions in Hot Bending of 22MnB5 Tubes

Tube Forming and Fabricating Technologies for Contributing Society by Tackling Problems of Environment and Aging Population

Tube Roll Forming Flower Design and Flexible Roll Adjustment with CAE Simulation

Ultrasonic Forming - Alternative to Orbital Riveting for Small Bimetallic Components

Ultrasonic Processing of Ultrahigh Strength Nanostructured Materials

Ultrasonic Processing of Ultrahigh Strength Nanostructured Materials

Ultrastrong Stable Extremely Fined Nanocrystalline Steel

Understanding the Microscale Plastic Behavior and Deformation Mechanism of Magnesium Alloy via Ex-situ Experiments and Full-field Crystal Plasticity Modeling

Untitled

Using Local Heat Treatment for Producing Uniform Profile Hollow Components by Radial Rotation Profile-forming

Using Plasticity for Making High-performance Nanostructured Composites

Vacuum Hot-roll Bonding of Titanium and Carbon Steel Using Pure Iron Interlayer

Validation of Automatically Generated Forging Sequences Using FE Simulations

Validation of Material Models for Thick Sheet Metals

Wave Formation and Temperature Distribution of Joint Interface in Al/Steel Impact Spot Welding

Welding of Aluminum in Chip Extrusion

Work Hardening and Fracture Strain Measurement of Hardened SKD11 Steel Using Shear Punching Test

Wrinkling Limit Diagram (WLD) Establishment and Influencing Factors Investigation for Sheet Metal Plastic Wrinkling under Nonuniform Tension

"Learning by Seeing": Estimating Metal Plasticity Parameters Using In Situ Observations of Cutting and Indentation

(Mon. or Tues. ONLY) Data Preparation in the Digital Material Representation Based 3D Cellular Automata Model of Static Recrystallization

(SEE NOTE) Modeling of Forming Induced Residual Stress Effects on Fatigue Life of Full-forward Extruded Rods

Questions about ProgramMaster? Contact programming@programmaster.org