ProgramMaster Logo
Conference Tools for 13th International Conference on the Technology of Plasticity (ICTP 2021)
Register as a New User
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 13th International Conference on the Technology of Plasticity (ICTP 2021)
Symposium 13th International Conference on the Technology of Plasticity (ICTP 2021)
Presentation Title A Plasticity Framework for Forming Applications
Author(s) Frederic Barlat, Toshihiko Kuwabara
On-Site Speaker (Planned) Frederic Barlat
Abstract Scope This presentation reviews the key features of a plasticity framework developed by the author and his co-workers over the last two decades. The purpose is to define an accurate macroscopic plasticity theory applicable to numerical simulations of practical forming processes in industry. The constitutive relationships are developed for anisotropic materials with an anisotropic hardening assumption. The framework relies on mathematical concepts, physical understanding of deformation mechanisms and experimental results. Lower scale simulation results are essential for the introduction of relevant features in the macroscopic framework. The experimental investigations on plasticity conducted by Professor Tozawa in the 1960’s and 70’s is of fundamental importance for the development and validation of the theory. An application of the approach for numerical forming process simulations of a complex sheet product is described as an illustration.
Proceedings Inclusion? Definite: At-meeting proceedings


45 Year’s Research and Development on Metal Forming and Joining
A Brief Review on Bar Straightening
A Computational Study on the Producible Rolling Thickness in Ultra-thin Strip Rolling
A Contact and Friction Model for Forming of Galvanized Steel Sheet Based on Fractal Theory
A Critical Review on the CPFEM Models Accounting for Gain Boundary Hardening Effect and Some Developments toward Simplification of the Wagoner Super-Dislocations (SD) Model
A Fast Computational Model for the Local Stress Distribution and Mechanical and Thermal Work Roll Deformations with Effects on Strip Profile and Flatness during Hot Rolling of Strip in Four-high Mills
A FE Billet Model and A Spring-mass-damper Press Model for the Simulation of Dynamic Forging Process: Application to a Screw Press
A Hot Forming Method for Die Temperature Higher than Billet Temperature
A Micro-macro Approach to Model the Residual Stresses in Metastable Austenitic Stainless Steel (MASS) Disc Springs Manufactured by Incremental Sheet Forming (ISF)
A New Approach for Measuring the Plastic Flow Behaviour in the Cutting Zone during Shearing in a Punching Machine
A New Approach for the Production of Burr-free Sheet Metal Components Having Significantly Increased Residual Formability
A New Criterion for Triclinic-asymmetric Yielding: Implicitly Describing Anisotropy and Distortional Asymmetry
A New Non-destructive Testing Method Applied to Clinching
A New Numerical Technique for Correction of the Stress-strain Curve and the Stress–strain Distribution on Neck Section in Tensile Specimen
A New Pure Bending Device for Material Properties Test of Sheet Metal
A New Test Method for Sheet Metal Deformation Subjected to Tension under Cyclic Bending and Compression (TCBC)
A Novel Approach to Predicting Surface Properties Generated during Metal Forming Processes
A Novel Continuum Damage Constitutive Model for Predicting the Forming Limit of AA7075 Alloy at Elevated Temperatures
A Novel Flexible Skew Rolling Process for Step Shafts: Feasibility Study
A Novel High Efficiency Method of Forming Polymers: An Insight into Their Forming Mechanism and Thermal Properties
A Novel Method to Fabricate 3D Structure Material with Mixtures of Coarse and Nano Grains by 3D Incremental Rolling
A Numerical and Experimental Investigation on the Full Path Crack Propagation for Duo-scale Microstructure WC-Co Cemented Carbide
A Plasticity Framework for Forming Applications
A Porosity Closure Model for the Integrated Casting and Forging Process of Aluminum Alloy and Its Application
A Predictive Strain-gradient Treatment with No Undetermined Constants or Length Scales
A Proposed Common Single-die Exchange Technique for Minimizing the Number of Installations in a Cold Forging Process of Pulleys
A Split-ring Test for Springback Measurement of QP Steel Sheets
A Study of Anisotropic Yield Function Based on J2 and J3 Invariants
A Study of the Forming Quality of Magnesium Alloy Cylindrical Parts with Inner Ribs by Induction-heating Assisted Spinning
A Study on Developing Advanced Design Formula for Heat Form Quench (HFQ®) of Complex-shaped Aluminium Panels
A Study on Tube Bending Die Design in the Tube-hydroforming Process
A Study on Unified Modelling of Hot Stamping Boron Steel Components with Controlled Microstructural Distribution for Optimised Crashworthiness
AA5754 Damage and Fracture Behavior Sensitivity to the Strain Rate Effect
Abnormal Plastic Flow and Fracture Behavior of Dual-phase Steels Induced by Dynamic Strain Aging
Accurate Mapping of Thermal Camera Measurements on Planar Deformations
Accurate Modelling of Flow Stress of AISI1025 at Room Temperature and Its Application to Precision Forging Simulation
Achieving an Interference Fit between Two Rings during Composite Ring Rolling
Achieving Dual-property from a Single Superalloy by Tailoring Its Second-phase Particles during Multi-step Plastic Forming with External Magnetic Field
Adaptive Manufacturing in Toolmaking through Cross-technology Process Chains
Adding Value by Advancing Metal Forming
Adjusting Product Properties by Deliberate Induction of Residual Stresses in Single Point Incremental Forming
Advanced Application of Al-Steel Hybrid Sheets for EV Battery Casing
Advanced Design of Work Roll Contours for Different Roll Mill Types
Advancements in the Simulation of Magnetic Pulse Forming Processes with FORGE(R)
Advances and Challenges in Computational Modeling of Impact Welding Process
Advancing the Accuracy of Computational Models for Double-sided Incremental Forming
Aging Hardening Response and Fracture Behavior of an Ultra-high Manganese Low-density Austenitic Cast Steel
An Application of Homogeneous Anisotropic Hardening Model to the Prestrained Hole-expansion Experiment
An Asymmetric Plasticity Constitutive Model Fully Coupled with Isotropic Ductile Damage for Failure Frediction of Mg Alloy AZ31B
An Enhanced Johnson–Cook Model for Describing Hot Deformation Behaviors of a Typical Al-Si-Mg Alloy
An Extended Ductile Fracture Prediction Model Considering Hydrostatic Stress and Maximum Shear Stress
An Extended GTN Ductile Fracture Model for a Broad Range of Stress States
An Improved Hot Stamping Process for Titanium Alloys by Fast Heating
An Investigation into the Influence of Interrupted Loading in Improving the Stretch-flangeability of Dual-phase (DP600) Steels
An investigation on formability of Ti6Al4V alloy in the three-layer sheet hot stamping process
An Upper Bound Analysis of Friction Stir Spot Welding Processes
Analysis of Anisotropy Behavior of Aluminium Alloys by Barlat´S YLD 2000-2D Yield Stress Function
Analysis of Creep Behavior of Magnesium Alloy Sheet (AZ31B) in Warm Forming
Analysis of Cross-hardening by High Resolution Orientation Imaging
Analysis of Cylindrically and Spherically Embossed Flux Barriers in Non-oriented Electrical Steel
Analysis of Influencing Factors on the Achievability of Bistable Fully Closed Shells by Semi-analytical Modelling
Analysis of Material Work Hardening and Fracture Strains for Sheet Metal Stamping Processes
Analysis of Microstructure Based Variational and Progressive Strain Hardening Behavior for Copper Single Crystal
Analysis of Orientation Behavior of Plate-like Particles in Differential Speed Powder Rolling
Analysis of the Influence of Joining Partners on the Residual Stress Distribution in Assembled Shafts
Analysis of the Microstructural Forming Behavior of 316L Metal Foils with Different Initial Grain Sizes for the Production of Metallic Bipolar Plates
Analysis of the Thermomechanical Flow Behavior of Carburized Sheet Metal in Hot Stamping
Analysis of Tube Spinning
Analysis of Work Hardening and Tribological Changes after a Gap Controlled Drawbead Passage
Analytical Model for Non-axisymmetric Deformation in Ring Rolling
Anisotropic Ductile Fracture Estimation of Diagonal Cracks in Flange-shaped Parts
Anisotropic Plasticity and Ductile Fracture of Titanium Alloy Sheet at Elevated Temperature: Characterization and Modeling
Anisotropic Plasticity and Fracture Behavior of AZ31B Magnesium Alloy Sheet
Apparent Anisotropy of Cubic Materials as a Function of Material and Boundary Value Problem Length-scales
Applicability of ALE Based FEM Methods in the Numerical Modeling of 3D Fine Blanking Processes
Application of Barlat´S YLD 2000-2D Yield Criterion to Predict the Anisotropic Response of Stainless Steel
Application of Servo Motion Curve to Square Cup Deep Drawing Process
Application of the Nondestructive Evaluation (NDE) Method to Evaluate the Sheared Edge Quality and Edge Cracking
Artificial Neural Network Approach for Predicting Yield Strength with Microstructure and Texture in Magnesium Alloys
Assessing the Accuracy of the Methods Used for Computing the Balanced Biaxial Yield Stress
Assessment of Influence of Damage on Component Properties by Model Predictions
Basic Study for the Controlled Adjustment of the Residual Stress State in Wire Drawing for Further Processing to Torsion Bar Springs
Basic Study for the Controlled Adjustment of the Residual Stress State in Wire Drawing Products for Further Processing to Torsion Bar Springs
Biaxial Tensile Test on Aluminum Alloy Sheet at Warm Temperature
Buckling in Highly Shaped Rolled Rings
Bulk Microforming From Sheet Metal - A Promising Approach for the Mass Production of Cold Formed Metallic Micro Parts
Calibration and Verification of Stress-strain Curve in High Strain Region of Mild Steel Sheet
Characterisation of Anisotropic Material Behaviour
Characterization of Mechanical Properties, Fracture, Microstructure for Aluminum Alloy under High-rate Electromagnetic Tensile Loadings
Closed-die Forging of Titanium and Nickel-based Superalloys
Co-extrusion of Compound-cast AA7075/6060 Bilayer Billets at Various Temperatures
Combined Computed Tomography and Numerical Modeling for the Analysis of Bending of Additively Manufactured Cellular Sheets
Comparative Study about Progressive Bending Characteristics of AHSS Dual Phase and UHSS Martensitic Steels
Comparative Study of Electrically-assisted Pressure Joining: Aluminum 6061-T6 Alloys and Copper C11000 Alloys
Comparison of Linear Regression and Neural Networks as Surrogates for Sensor Modeling on a Deep Drawn Part
Comparison of Plasticity and Fracture Behaviors of Conventional and 3rd Gen. AHSS
Comparison of Rolling Forces and Enlargement of Hot-rolled Strip Obtained from Experimental, Analytical and Simulation Models
Comparison of the Resulting Form Deviations on Discs from FEM and Real Rolling in Radial-axial Ring Rolling
Compatible Deformation and Ductility of Magnesium
Complementary Methods for Assessment of Residual Stress Fields Induced by Rotary Swaging of Steel Bars
Compression of C/Thermoplastic Printed Composite; Shaping Parameters and Material Health
Computational modeling of magnetic pulse dissimilar alloys welding: Aluminum Alloy 6082-T6 and HC420LA Steel
Computer Aided Modeling of the Hot Forming Staking Process Based on Experimental Data
Constitutive Hardening Model Development for Materials with Evolving Microstructural Phase Constituents
Constitutive Law Parameter Identification for Hot Forging Using Compression Experiments on Forging Presses
Constitutive Model and Plate Forging Ability of 5052 Aluminum Alloy under Different Temperatures
Constitutive Modeling and Processing Map of Ti-5Al-5Mo-5V-3Cr-1Zr Alloy during Hot Deformation
Construction of Material Constitutive Model under Ultrasonic Vibration
Control Theory for High End Press Brake
Crystal Plasticity Analysis of the Effect of Bi-modal Microstructure's Features of Titanium Alloy on Strain Localization
Cutting Blades for Food Processing Applications Manufactured Using Innovative Spin Forming
Decoupling of Adverse Effect of Inter-roll Thrust Force on Steering Control during Strip Rolling
Deformation Analysis in Ultrasonic-assisted Multi-stage Incremental Sheet Forming
Deformation Mechanism of the Tooth Material Filling for Precision Forging of Spur Gears
Deformation Mechanism Selection during Superplasticity Testing of Submicron AA 5083
Deformation Mechanisms in Tool-workpiece Asperity Contact in Metal Forming
Deformation Processing in Microgravity
Deformation Uniformity Control in Precision Forming of Thin-walled Parts under the Subregion Control of Flexible-die Property
Deforming Behavior in Magnetic Pressure Parallel Seam Welding
Deforming Nanometric Volumes at Large Shear Strains by AFM Scratching
Demonstration of the Potential of Multi-material Wire Arc Additive Manufacturing (WAAM) for Regenerative Surfacing of Hot Forging Dies
Dependence of Mesoscale Structure of Drawn High Carbon Steel Wire on Wire Diameter
Descriptions of Several Cyclic Plasticity Phenomena Based on Y-U Model: Elastic-plastic Transition, Closure of Stress-strain Loop and Ratcheting
Design and fabrication of a high-performance magnetic actuator for magnetic pulse welding of metal tubes with large diameters
Design of a New Cruciform-like Specimen for Combined Tension and Shear of Metal Sheets
Development and Implementation of Static Recrystallization Model of 6XXX Aluminum Alloy Using Industrial Experiments
Development of a Multi-cycle Hot Stamping Simulator to Study the Effect of Tool Temperature on the IHTC for Aluminium Alloys
Development of a New One-side Riveting Process for Dissimilar Metallic and Non-metallic Materials
Development of a New Printing Method Using Soft Material Tools
Development of a Special Cold Roll Bonding Technique for Fabrication of Al-Steel Layered Composites with a Wavy Interface
Development of Adhesion Preventing Method during Deep-drawing of Titanium Alloy Sheets
Development of Antiloosening Bolts Based on Innovative Double Thread Mechanism
Development of Automatic Design System for Closed Die Forging Process of Disk-shaped Products
Development of Compact Testing Apparatus for In-situ Micro-observation of Surface Roughness in Micro-forming process.
Development of Criteria for Strain Induced Oxide Layer Fracture during Cold Rolling of Aluminum
Development of Mechanical Cards for Finite Element Analysis of Mild Steels by Parameter Optimization
Development of Numerical Model Based Deep Learning for the Roll Force Prediction at the Sendzimir Mill
Development of Oil-type Lubricants for Cold Forging Using Phase Transition Behavior Under High-pressure Conditions
Development of Theory and Technologies for Hybrid Metal Forming Processes
Development of Warm Press Forming Process Method of Ti-6Al-4V Alloy Sheet
Direct Measurement of Stiction/Friction Forces during Microscale Metal Forming Processes: Effects of Size and Surface Coatings
Directional Distortional Hardening of Mg Alloys under Bi-axial Tensile Test
Ductile Fracture Behavior at Micro/Meso-scale in Ultrafine-grained Materials
Ductile Fracture in Flow Spinning of Aluminum Alloy Thin-walled Tubular Parts with Longitudinal and Transverse Inner Ribs
Ductile Fracture Prediction of Hot Stamped Boron Steel 22MnB5 with Modified Mohr-Coulomb and Hosford-Coulomb Models
Dynamic Recrystallization Behaviors of 5083 Aluminum Alloys with Different Initial Microstructures under Hot Compression
Dynamic Recrystallization Characteristics of GH4169 Superalloy with Different Initial δ Phase during Hot Deformation Accompanied by Changed Strain Rate
Effect of a Rapid Aging Treatment at High Temperatures (TERAT) on the Mechanical and Structural Properties of Alloy 6201
Effect of Anisotropy Evolution on Several Sheet Metal Forming Processes
Effect of Bending Intensity on Straightness in Spinner Straightener
Effect of Blanking on Magnetic and Mechanical Properties of Non-oriented Electrical Steel
Effect of Cold-rolling Deformation on Microstructural Evolution, Mechanical Properties and Deformation Behavior of Ultra-low Carbon Medium Mn Steel
Effect of Continuous Extrusion Forming on Microstructure of Copper Bar
Effect of CZM Parameters on Delamination Behavior of Laminated Metal Sheet with Thin Adhesive Layer in V-die Bending Test
Effect of Deformation Parameters on Microstructure of 6082 Aluminum Alloy Undergoing Deformation-solution-aging Process
Effect of Delivery Angle on Longitudinal Buckling in Temper Rolling of Thin Steel Strips
Effect of Expansion Ratio on Formability in Tube Drawing with Diameter Expansion
Effect of Feed Rate on Texture Evolution of 42CrMo Casting Blank during Hot Ring Rolling
Effect of Ferrite Rolling Temperature on the Microstructure and Properties of an Ultra-low Carbon Steel Produced by CSP Process
Effect of Friction Extrusion Parameters on Microstructure, Texture and Properties of Two Precipitation Hardened Al Alloys
Effect of Machining Induced Microstructure Changes on the Edge Formability of Titanium Alloys at Room Temperature
Effect of Microscopic Sine Profile of the Work Roll Surface on the Material Behavior during Cold Rolling of Al Sheets
Effect of Production Rate on Lubrication Performance in Combined Forward-Can and Backward-Can Cold Extrusion Test
Effect of Pulse Current on Mechanical Properties and Microstructure of Ultrahigh Strength Steel
Effect of Short Pulsed-current on Stress Relaxation in Uniaxial Tensile Test
Effect of Slide Motions on Drawing Depth and Thickness Variation of Pure Titanium in Servo Press Microforming
Effect of Superimposed Pressure on the Plasticity, Localization and Fracture of Aluminum Alloys
Effect of the Slider Motion of Servo-press on the Spring Back of Bending with High Strength Aluminum Sheets
Effect of Width-to-thickness Ratio of Product on the Quality of Welding Properties of AA6063 during Continuous Extrusion with Double Billets
Effects of Combined Extrusion and Forging Process on Microstructure and Mechanical Properties of Al/Mg/Al Sheet
Effects of Heat Treatment Temperature and Holding Time on Microstructure Evolution and Microhardness of SAF2205 Duplex Stainless Steel After Cyclic Torsion Deformation
Effects of Microstructure on Mechanical Properties of MAX Phase Reinforced Aluminum Matrix Composites by Micro-indentation
Effects of Press Ram Vibrations on the Production Quality
Effects of Process Parameters on the Peeling Strength of Warm Roll-bonded AL1100/Polyurethane/AL1100 Sandwich Composite under Static/Cyclic Loading
Effects of Process Parameters on the Peeling Strength of Warm Roll-bonded AL1100/Polyurethane/AL1100 Sandwich Composite under Static/Cyclic Loading
Effects of Processing Parameters on Microstructure Evolution of 300M Ultrahigh Strength Steel during the Combined Additive Manufacturing and Forging Process
Effects of Residual Strain on Grain Growth of Extruded Aluminum Micro-channel Tubes during Heat Treatment
Effects of Servo Press Forming on Various Strain Path Failures
Efficient Evaluation of Springback in Spatial Bending of Superalloy Helical Tubes
Elastoplastic Finite Element Analysis of Multi-body Processes for Joining Mechanical Parts
Electric Pulse Sprigback Reduction on AA5754 Forming
Electrically Assisted Pressure Joining of Cylindrical Steel Bolt and Steel Plate
Electrically Assisted Solid-state Joining with Plastic Deformation: Dissimilar Stainless Steel Joints
Elimination of Deformation Localization in the Forming of Fuselage Profiles with Variable Bending Curvatures and Sections Employing the Novel Friction Assist Stretch Bending Method
Energy-dependent Surface Integrity of Stainless Steel AISI 304 after Robot-based Machine Hammer Peening
Enhancing Tool Life by Manipulating the Punch & Die Elastic Strain Field during Forging
Hide details for [<a href="/PM/PM.nsf/ApprovedAbstracts/A07518C3E11FDF178525846600535A7B?OpenDocument">Estimation and PreventioEstimation and Prevention of Strain Localization in Shear Tests
[Replication or Save Conflict]
Evaluating 980 GEN-3 Steel with Tested and Numerical Forming Limit Curve
Evaluating an Automated Avoidance of Ring Climbing in Radial-axial Ring Rolling
Evaluating the Reliability of a Nondestructive Evaluation (NDE) Tool to Measure the Incoming Sheet Mechanical Properties
Evaluation of isotropic and anisotropic constitutive models on plasticity prediction of AA7075 extruded tube under Tension-Tension and Tension-Compression
Evaluation of Lubricant Performance for Thick Sheet Ironing Process by Ball Ironing Test
Evaluationg of Press Forming Technique for Bent Automotive Body Parts Using In-plane Shear Deformation
Experimental Analysis on Granular Media Based Tube Forming with Active Axial Feed
Experimental and Numerical Investigation of Thermal Self-piercing Riveting Joint Performance of AA7075-T6 Aluminum Alloy
Experimental and Numerical Investigations into the Influence of the Process Parameters during the Deep Drawing of Fiber Metal Laminates
Experimental and Numerical Investigations on the Development and Stability of Residual Stresses Arising from Hot Forming Processes
Experimental and Numerical Studies on Plastic Deformation and Failure Behavior of Carbon Nanotube Reinforced Al Composite Sheet under Uniaxial Loading Condition
Experimental Assessment and Numerical Analysis of the Pillow Effect in Double-sided and Two-point Incremental Sheet Forming Processes
Experimental Characterization of Plasticity Increment Induced by TRIP and Its Dependence on the Annealing Temperature in Lean Duplex Stainless Steel
Experimental Implementation of SS 316L Cruciform Testing to Achieve Various Deformation Paths
Experimental Investigation and Constitutive Modeling of Dynamic Behavior and the Anisotropic Response of High-strength Lightweight AL-Li Alloys Sheets
Experimental Investigation of Component Contour and Cutting Offset on the Edge Fracture Behavior Using a Two-stage Shear Cutting Process
Experimental Investigation of Different WAAM (Wire-Arc Additive Manufacturing) Processes and Their Influence on the Component Properties and Formability
Experimental Investigation on Springback Behavior of Dual-phase Steel in Warm Forming
Experimental Investigation on the Forming Limit of AZ31 Alloy by Temperature-controlled Incremental Forming
Experimental Investigations for Stretch Bending of Extruded 7075 Aluminum Alloy Profile with Y-section
Experimental Research on Mechanics Response of Q235 Steel under Stress Cyclic Loading
Experimental Study and Analysis on the Effects of Cyclic Bending on the Stress-strain Curves of Aluminum Plate
Experimental study and modelling of stress relaxation ageing behaviour and post-form mechanical properties in creep age forming of Al-Zn-Mg alloy
Experimental Study of Asymmetric Rolling of Aluminum Alloys
Experimental Study on Texture Evolution of Mg-Y Magnesium Alloy in Extrusion
Experimental Study on the In-plane Torsion Test for Sheet Metal
Experimental Study on Uniaxial Strain Cyclic Behavior of GS-20Mn5
Exploring the Fragmentation of Surface Films during Solid State Welding
Extrusion Technology of High-performance Aluminum Alloy Profiles with Large Complex Section
Fabrication of NiAl/TiAl-based Gradient Alloys by Additive Sintering
Failure Behavior of Cladded Steels during Bending – Experiment and Simulation
Fast Development of New Alloys for Metal Forming Using Additive Manufacturing
Fast Development of New Alloys for Metal Forming Using Additive Manufacturing
Fatigue Characteristics and Failure Mechanism of Self-piercing Riveting DP590 and AA6061 Plates
FE-based Investigation on the Influence of Inhomogeneously Heated Billets on Subsequent Forging Processes
FE Simulations of Piercing and Trimming of Al Alloys and AHSS
FEM Analysis on Multi-pass Wiredrawing Process of Ultra-fine Steel Wire: Investigation on Stress, Strain and Hardness
Fine-piercing of Electrical Steel Sheets by Edge-sharpened Diamond-punch
Finite Element Analysis and Comparison of Sheet Flatness during Symmetric and Asymmetric Cold Rolling
Finite Element Analysis of Die Quenching 22MnB5 Steel Sheets
Finite Element Method Based on Space Mesh
Finite Element Modeling and Control of the Forming Temperature in Electrically-assisted Double Sided Incremental Forming
Finite Element Simulation and Die Design for Tube Hydro-piercing
Finite Element Simulation of Edge Fracture by Mapping the Shear-induced Ductile Damage into Hole-expansion Simulation
Flexible Manufacturing of Concave-convex Parts by Incremental Sheet Forming with Active Medium
Flow Behavior and Processing Map of a Nickel-based Superalloy during Hot Plastic Deformation Process
Fluidity of the Wood Composite Combined with Natural Binder on Injection Molding
Folding-shearing to Produce an Isolated Shrink Corner
Force-controlled Toolpaths in Metal Spinning
Formability Analysis of a Local Heat-treated Aluminium Alloy Thin-walled Tube
Formability and Damage-resistance of Laminated Steel Sheets with Non-ideal Interface Bonding
Formability Improvements at Room Temperature of AA5754-H32 via Continuous Bending under Tension (CBT) and Pre-forming Heat Treatment
Formability of Functional Corrugated Cup
Formation of Residual Stresses in Austenitic Stainless Steels by Infeed and Recess Rotary Swaging
Forming-induced Distortion of Dissimilar Ti-Al Laminated Composite Plate after Non-equal Channel Lateral Co-extrusion
Forming-induced Residual Stress Influence on Material Properties of Roll-Formed High Strength Martensite Steels
Forming Limit Results Comparing the Bragard Technique with a Statistical, Deformation-history Analysis
Forming of Metallic Membrane by Layered Deep Drawing
Forming of Parts with Locally Defined Mechanical and Ferromagnetic Properties by Flow-forming
Forming of PMMA Sheets by Lap Incremental Forming with Local Friction Heating
Forming of Spur Gear by Combination of Divided Flow Forging and Slide Motion by Using Liquid Lubricant
Forming Surface Texture on Copper Sheets by Electrically-assisted Micro-rolling
Forming the Future – Metal Forming, Innovation for Sustainability
Fretting Damage and Fatigue Property Analysis of Self-piercing Riveted Joints of AA5052 Aluminium Alloy
Friction and Thermal Insulation: Influence of Oxide Scale on Hot Forging Sequences
Friction Based Solid State Recycling: An Industry-ready Technology?
Friction Law in Cold Metal Forming
Friction Stir Welding Applied in Joining of Wrought Homogenized Armor Steel
Friction Welding with a Metal Powder Interlayer
From Bridge to Bumper – Utilization of Pre-stressing during Manufacturing of Hybrid Sheet Metal Structures
Fundamentals of Continuous Helicoid Auger Flighting Rolling - Deformation Mechanics, Kinematics and Applications
Galling-free Micro-forging of Titanium Wire with High Reduction in Thickness by Beta-SiC Dies
General Step Reduction and Enlargement Method for Knowledge-based Process Planning of Totally Non-axisymmetric Forged Products with Blanking and Punching
Generation of Locally Adjusted Tailored Properties in High-strength Steels Using Contact Heating during a Press Hardening Process
Geometry Representation Techniques for Machine Learning Application in Incremental Sheet Forming
Grain size effect on formability in electromagnetically-assisted micro-bulging of pure titanium sheet
Grain Size Effect on the Ductile Fracture of Steel in Hot Deformation
Hardening/Softening Characteristics of a TRIP-assisted Duplex Stainless Steel under Cyclic Deformation
Heterogeneous Deformation in (α+β) Titanium Alloys: Iin-situ Explorations of Strain Localization and Its Governing Deformation Micro-events
High-speed Full-field Deformation Measurement of Multi-stage Shear Cutting
High-speed Material Characterization Using an Instrumented Forging Hammer
High-temperature Properties of Hot-work Tool Steel (AISI H13) Deposited via Direct Energy Deposition
Hole Expansion Simulation of Steel Sheet Considering Differential Hardening
Hot Cutting of Press-hardened Parts in Different Heat Treatment Regimes
Hot Deformation Behavior and Constitutive Modeling of a Novel Ni-based Superalloy
Hot Deformation Behavior of Aluminum-matrix Composites Reinforced with MAX Phase in Situ by Synthesis and Sintering
Hot Forming Behavior and Microstructure Evolution of Intermetallic Titanium Aluminides Produced by Additive Manufacturing
Hot Ring Rolling and Cold Expanding Strengthening of Mn18Cr18N Thick-wall Hollow Ingots
Hydro-mechanical Deep Drawing of Locally Solution Treated Aluminum Alloy Sheets
Identification of the Anisotropic Plastic Constitutive Parameters Using the Virtual Fields Method for AZ31B Magnesium Alloy