 45 Year’s Research and Development on Metal Forming and Joining |
| A Brief Review on Bar Straightening |
| A Computational Study on the Producible Rolling Thickness in Ultra-thin Strip Rolling |
| A Contact and Friction Model for Forming of Galvanized Steel Sheet Based on Fractal Theory |
| A Critical Review on the CPFEM Models Accounting for Gain Boundary Hardening Effect and Some Developments toward Simplification of the Wagoner Super-Dislocations (SD) Model |
| A Fast Computational Model for the Local Stress Distribution and Mechanical and Thermal Work Roll Deformations with Effects on Strip Profile and Flatness during Hot Rolling of Strip in Four-high Mills |
| A FE Billet Model and A Spring-mass-damper Press Model for the Simulation of Dynamic Forging Process: Application to a Screw Press |
| A Hot Forming Method for Die Temperature Higher than Billet Temperature |
| A Micro-macro Approach to Model the Residual Stresses in Metastable Austenitic Stainless Steel (MASS) Disc Springs Manufactured by Incremental Sheet Forming (ISF) |
| A New Approach for Measuring the Plastic Flow Behaviour in the Cutting Zone during Shearing in a Punching Machine |
| A New Approach for the Production of Burr-free Sheet Metal Components Having Significantly Increased Residual Formability |
| A New Criterion for Triclinic-asymmetric Yielding: Implicitly Describing Anisotropy and Distortional Asymmetry |
| A New Non-destructive Testing Method Applied to Clinching |
| A New Numerical Technique for Correction of the Stress-strain Curve and the Stress–strain Distribution on Neck Section in Tensile Specimen |
| A New Pure Bending Device for Material Properties Test of Sheet Metal |
| A New Test Method for Sheet Metal Deformation Subjected to Tension under Cyclic Bending and Compression (TCBC) |
| A Novel Approach to Predicting Surface Properties Generated during Metal Forming Processes |
| A Novel Continuum Damage Constitutive Model for Predicting the Forming Limit of AA7075 Alloy at Elevated Temperatures |
| A Novel Flexible Skew Rolling Process for Step Shafts: Feasibility Study |
| A Novel High Efficiency Method of Forming Polymers: An Insight into Their Forming Mechanism and Thermal Properties |
| A Novel Method to Fabricate 3D Structure Material with Mixtures of Coarse and Nano Grains by 3D Incremental Rolling |
| A Numerical and Experimental Investigation on the Full Path Crack Propagation for Duo-scale Microstructure WC-Co Cemented Carbide |
| A Plasticity Framework for Forming Applications |
| A Porosity Closure Model for the Integrated Casting and Forging Process of Aluminum Alloy and Its Application |
| A Predictive Strain-gradient Treatment with No Undetermined Constants or Length Scales |
| A Proposed Common Single-die Exchange Technique for Minimizing the Number of Installations in a Cold Forging Process of Pulleys |
| A Split-ring Test for Springback Measurement of QP Steel Sheets
|
| A Study of Anisotropic Yield Function Based on J2 and J3 Invariants |
| A Study of the Forming Quality of Magnesium Alloy Cylindrical Parts with Inner Ribs by Induction-heating Assisted Spinning |
| A Study on Developing Advanced Design Formula for Heat Form Quench (HFQ®) of Complex-shaped Aluminium Panels |
| A Study on Tube Bending Die Design in the Tube-hydroforming Process |
| A Study on Unified Modelling of Hot Stamping Boron Steel Components with Controlled Microstructural Distribution for Optimised Crashworthiness |
| AA5754 Damage and Fracture Behavior Sensitivity to the Strain Rate Effect |
| Abnormal Plastic Flow and Fracture Behavior of Dual-phase Steels Induced by Dynamic Strain Aging |
| Accurate Mapping of Thermal Camera Measurements on Planar Deformations |
| Accurate Modelling of Flow Stress of AISI1025 at Room Temperature and Its Application to Precision Forging Simulation |
| Achieving an Interference Fit between Two Rings during Composite Ring Rolling |
| Achieving Dual-property from a Single Superalloy by Tailoring Its Second-phase Particles during Multi-step Plastic Forming with External Magnetic Field |
| Adaptive Manufacturing in Toolmaking through Cross-technology Process Chains |
| Adding Value by Advancing Metal Forming |
| Adjusting Product Properties by Deliberate Induction of Residual Stresses in Single Point Incremental Forming |
| Advanced Application of Al-Steel Hybrid Sheets for EV Battery Casing |
| Advanced Design of Work Roll Contours for Different Roll Mill Types |
| Advancements in the Simulation of Magnetic Pulse Forming Processes with FORGE(R) |
| Advances and Challenges in Computational Modeling of Impact Welding Process |
| Advancing the Accuracy of Computational Models for Double-sided Incremental Forming |
| Aging Hardening Response and Fracture Behavior of an Ultra-high Manganese Low-density Austenitic Cast Steel |
| An Application of Homogeneous Anisotropic Hardening Model to the Prestrained Hole-expansion Experiment |
| An Asymmetric Plasticity Constitutive Model Fully Coupled with Isotropic Ductile Damage for Failure Frediction of Mg Alloy AZ31B |
| An Enhanced Johnson–Cook Model for Describing Hot Deformation Behaviors of a Typical Al-Si-Mg Alloy |
| An Extended Ductile Fracture Prediction Model Considering Hydrostatic Stress and Maximum Shear Stress |
| An Extended GTN Ductile Fracture Model for a Broad Range of Stress States |
| An Improved Hot Stamping Process for Titanium Alloys by Fast Heating |
| An Investigation into the Influence of Interrupted Loading in Improving the Stretch-flangeability of Dual-phase (DP600) Steels |
| An investigation on formability of Ti6Al4V alloy in the three-layer sheet hot stamping process |
| An Upper Bound Analysis of Friction Stir Spot Welding Processes |
| Analysis of Anisotropy Behavior of Aluminium Alloys by Barlat´S YLD 2000-2D Yield Stress Function |
| Analysis of Creep Behavior of Magnesium Alloy Sheet (AZ31B) in Warm Forming |
| Analysis of Cross-hardening by High Resolution Orientation Imaging |
| Analysis of Cylindrically and Spherically Embossed Flux Barriers in Non-oriented Electrical Steel |
| Analysis of Influencing Factors on the Achievability of Bistable Fully Closed Shells by Semi-analytical Modelling |
| Analysis of Material Work Hardening and Fracture Strains for Sheet Metal Stamping Processes |
| Analysis of Microstructure Based Variational and Progressive Strain Hardening Behavior for Copper Single Crystal |
| Analysis of Orientation Behavior of Plate-like Particles in Differential Speed Powder Rolling |
| Analysis of the Influence of Joining Partners on the Residual Stress Distribution in Assembled Shafts |
| Analysis of the Microstructural Forming Behavior of 316L Metal Foils with Different Initial Grain Sizes for the Production of Metallic Bipolar Plates |
| Analysis of the Thermomechanical Flow Behavior of Carburized Sheet Metal in Hot Stamping |
| Analysis of Tube Spinning |
| Analysis of Work Hardening and Tribological Changes after a Gap Controlled Drawbead Passage |
| Analytical Model for Non-axisymmetric Deformation in Ring Rolling |
| Anisotropic Ductile Fracture Estimation of Diagonal Cracks in Flange-shaped Parts |
| Anisotropic Plasticity and Ductile Fracture of Titanium Alloy Sheet at Elevated Temperature: Characterization and Modeling |
| Anisotropic Plasticity and Fracture Behavior of AZ31B Magnesium Alloy Sheet |
| Apparent Anisotropy of Cubic Materials as a Function of Material and Boundary Value Problem Length-scales |
| Applicability of ALE Based FEM Methods in the Numerical Modeling of 3D Fine Blanking Processes |
| Application of Barlat´S YLD 2000-2D Yield Criterion to Predict the Anisotropic Response of Stainless Steel |
| Application of Servo Motion Curve to Square Cup Deep Drawing Process |
| Application of the Nondestructive Evaluation (NDE) Method to Evaluate the Sheared Edge Quality and Edge Cracking |
| Artificial Neural Network Approach for Predicting Yield Strength with Microstructure and Texture in Magnesium Alloys |
| Assessing the Accuracy of the Methods Used for Computing the Balanced Biaxial Yield Stress |
| Assessment of Influence of Damage on Component Properties by Model Predictions |
| Basic Study for the Controlled Adjustment of the Residual Stress State in Wire Drawing for Further Processing to Torsion Bar Springs |
| Basic Study for the Controlled Adjustment of the Residual Stress State in Wire Drawing Products for Further Processing to Torsion Bar Springs |
| Biaxial Tensile Test on Aluminum Alloy Sheet at Warm Temperature |
| Buckling in Highly Shaped Rolled Rings |
| Bulk Microforming From Sheet Metal - A Promising Approach for the Mass Production of Cold Formed Metallic Micro Parts |
| Calibration and Verification of Stress-strain Curve in High Strain Region of Mild Steel Sheet |
| Characterisation of Anisotropic Material Behaviour |
| Characterization of Mechanical Properties, Fracture, Microstructure for Aluminum Alloy under High-rate Electromagnetic Tensile Loadings |
| Closed-die Forging of Titanium and Nickel-based Superalloys |
| Co-extrusion of Compound-cast AA7075/6060 Bilayer Billets at Various Temperatures |
| Combined Computed Tomography and Numerical Modeling for the Analysis of Bending of Additively Manufactured Cellular Sheets |
| Comparative Study about Progressive Bending Characteristics of AHSS Dual Phase and UHSS Martensitic Steels |
| Comparative Study of Electrically-assisted Pressure Joining: Aluminum 6061-T6 Alloys and Copper C11000 Alloys |
| Comparison of Linear Regression and Neural Networks as Surrogates for Sensor Modeling on a Deep Drawn Part |
| Comparison of Plasticity and Fracture Behaviors of Conventional and 3rd Gen. AHSS |
| Comparison of Rolling Forces and Enlargement of Hot-rolled Strip Obtained from Experimental, Analytical and Simulation Models |
| Comparison of the Resulting Form Deviations on Discs from FEM and Real Rolling in Radial-axial Ring Rolling |
| Compatible Deformation and Ductility of Magnesium |
| Complementary Methods for Assessment of Residual Stress Fields Induced by Rotary Swaging of Steel Bars |
| Compression of C/Thermoplastic Printed Composite; Shaping Parameters and Material Health |
| Computational modeling of magnetic pulse dissimilar alloys welding: Aluminum Alloy 6082-T6 and HC420LA Steel |
| Computer Aided Modeling of the Hot Forming Staking Process Based on Experimental Data |
| Constitutive Hardening Model Development for Materials with Evolving Microstructural Phase Constituents |
| Constitutive Law Parameter Identification for Hot Forging Using Compression Experiments on Forging Presses |
| Constitutive Model and Plate Forging Ability of 5052 Aluminum Alloy under Different Temperatures |
| Constitutive Modeling and Processing Map of Ti-5Al-5Mo-5V-3Cr-1Zr Alloy during Hot Deformation |
| Construction of Material Constitutive Model under Ultrasonic Vibration |
| Control Theory for High End Press Brake |
| Crystal Plasticity Analysis of the Effect of Bi-modal Microstructure's Features of Titanium Alloy on Strain Localization |
| Cutting Blades for Food Processing Applications Manufactured Using Innovative Spin Forming |
| Decoupling of Adverse Effect of Inter-roll Thrust Force on Steering Control during Strip Rolling |
| Deformation Analysis in Ultrasonic-assisted Multi-stage Incremental Sheet Forming |
| Deformation Mechanism of the Tooth Material Filling for Precision Forging of Spur Gears |
| Deformation Mechanism Selection during Superplasticity Testing of Submicron AA 5083 |
| Deformation Mechanisms in Tool-workpiece Asperity Contact in Metal Forming |
| Deformation Processing in Microgravity |
| Deformation Uniformity Control in Precision Forming of Thin-walled Parts under the Subregion Control of Flexible-die Property |
| Deforming Behavior in Magnetic Pressure Parallel Seam Welding |
| Deforming Nanometric Volumes at Large Shear Strains by AFM Scratching |
| Demonstration of the Potential of Multi-material Wire Arc Additive Manufacturing (WAAM) for Regenerative Surfacing of Hot Forging Dies |
| Dependence of Mesoscale Structure of Drawn High Carbon Steel Wire on Wire Diameter |
| Descriptions of Several Cyclic Plasticity Phenomena Based on Y-U Model: Elastic-plastic Transition, Closure of Stress-strain Loop and Ratcheting |
| Design and fabrication of a high-performance magnetic actuator for magnetic pulse welding of metal tubes with large diameters |
| Design of a New Cruciform-like Specimen for Combined Tension and Shear of Metal Sheets |
| Development and Implementation of Static Recrystallization Model of 6XXX Aluminum Alloy Using Industrial Experiments |
| Development of a Multi-cycle Hot Stamping Simulator to Study the Effect of Tool Temperature on the IHTC for Aluminium Alloys |
| Development of a New One-side Riveting Process for Dissimilar Metallic and Non-metallic Materials |
| Development of a New Printing Method Using Soft Material Tools |
| Development of a Special Cold Roll Bonding Technique for Fabrication of Al-Steel Layered Composites with a Wavy Interface |
| Development of Adhesion Preventing Method during Deep-drawing of Titanium Alloy Sheets |
| Development of Antiloosening Bolts Based on Innovative Double Thread Mechanism |
| Development of Automatic Design System for Closed Die Forging Process of Disk-shaped Products |
| Development of Compact Testing Apparatus for In-situ Micro-observation of Surface Roughness in Micro-forming process. |
| Development of Criteria for Strain Induced Oxide Layer Fracture during Cold Rolling of Aluminum |
| Development of Mechanical Cards for Finite Element Analysis of Mild Steels by Parameter Optimization |
| Development of Numerical Model Based Deep Learning for the Roll Force Prediction at the Sendzimir Mill |
| Development of Oil-type Lubricants for Cold Forging Using Phase Transition Behavior Under High-pressure Conditions |
| Development of Theory and Technologies for Hybrid Metal Forming Processes |
| Development of Warm Press Forming Process Method of Ti-6Al-4V Alloy Sheet |
| Direct Measurement of Stiction/Friction Forces during Microscale Metal Forming Processes: Effects of Size and Surface Coatings |
| Directional Distortional Hardening of Mg Alloys under Bi-axial Tensile Test |
| Ductile Fracture Behavior at Micro/Meso-scale in Ultrafine-grained Materials |
| Ductile Fracture in Flow Spinning of Aluminum Alloy Thin-walled Tubular Parts with Longitudinal and Transverse Inner Ribs
|
| Ductile Fracture Prediction of Hot Stamped Boron Steel 22MnB5 with Modified Mohr-Coulomb and Hosford-Coulomb Models |
| Dynamic Recrystallization Behaviors of 5083 Aluminum Alloys with Different Initial Microstructures under Hot Compression |
| Dynamic Recrystallization Characteristics of GH4169 Superalloy with Different Initial δ Phase during Hot Deformation Accompanied by Changed Strain Rate |
| Effect of a Rapid Aging Treatment at High Temperatures (TERAT) on the Mechanical and Structural Properties of Alloy 6201 |
| Effect of Anisotropy Evolution on Several Sheet Metal Forming Processes |
| Effect of Bending Intensity on Straightness in Spinner Straightener |
| Effect of Blanking on Magnetic and Mechanical Properties of Non-oriented Electrical Steel |
| Effect of Cold-rolling Deformation on Microstructural Evolution, Mechanical Properties and Deformation Behavior of Ultra-low Carbon Medium Mn Steel |
| Effect of Continuous Extrusion Forming on Microstructure of Copper Bar |
| Effect of CZM Parameters on Delamination Behavior of Laminated Metal Sheet with Thin Adhesive Layer in V-die Bending Test |
| Effect of Deformation Parameters on Microstructure of 6082 Aluminum Alloy Undergoing Deformation-solution-aging Process |
| Effect of Delivery Angle on Longitudinal Buckling in Temper Rolling of Thin Steel Strips |
| Effect of Expansion Ratio on Formability in Tube Drawing with Diameter Expansion |
| Effect of Feed Rate on Texture Evolution of 42CrMo Casting Blank during Hot Ring Rolling |
| Effect of Ferrite Rolling Temperature on the Microstructure and Properties of an Ultra-low Carbon Steel Produced by CSP Process |
| Effect of Friction Extrusion Parameters on Microstructure, Texture and Properties of Two Precipitation Hardened Al Alloys |
| Effect of Machining Induced Microstructure Changes on the Edge Formability of Titanium Alloys at Room Temperature |
| Effect of Microscopic Sine Profile of the Work Roll Surface on the Material Behavior during Cold Rolling of Al Sheets |
| Effect of Production Rate on Lubrication Performance in Combined Forward-Can and Backward-Can Cold Extrusion Test |
| Effect of Pulse Current on Mechanical Properties and Microstructure of Ultrahigh Strength Steel |
| Effect of Short Pulsed-current on Stress Relaxation in Uniaxial Tensile Test |
| Effect of Slide Motions on Drawing Depth and Thickness Variation of Pure Titanium in Servo Press Microforming |
| Effect of Superimposed Pressure on the Plasticity, Localization and Fracture of Aluminum Alloys |
| Effect of the Slider Motion of Servo-press on the Spring Back of Bending with High Strength Aluminum Sheets |
| Effect of Width-to-thickness Ratio of Product on the Quality of Welding Properties of AA6063 during Continuous Extrusion with Double Billets |
| Effects of Combined Extrusion and Forging Process on Microstructure and Mechanical Properties of Al/Mg/Al Sheet |
| Effects of Heat Treatment Temperature and Holding Time on Microstructure Evolution and Microhardness of SAF2205 Duplex Stainless Steel After Cyclic Torsion Deformation |
| Effects of Microstructure on Mechanical Properties of MAX Phase Reinforced Aluminum Matrix Composites by Micro-indentation |
| Effects of Press Ram Vibrations on the Production Quality |
| Effects of Process Parameters on the Peeling Strength of Warm Roll-bonded AL1100/Polyurethane/AL1100 Sandwich Composite under Static/Cyclic Loading |
| Effects of Process Parameters on the Peeling Strength of Warm Roll-bonded AL1100/Polyurethane/AL1100 Sandwich Composite under Static/Cyclic Loading |
| Effects of Processing Parameters on Microstructure Evolution of 300M Ultrahigh Strength Steel during the Combined Additive Manufacturing and Forging Process |
| Effects of Residual Strain on Grain Growth of Extruded Aluminum Micro-channel Tubes during Heat Treatment |
| Effects of Servo Press Forming on Various Strain Path Failures |
| Efficient Evaluation of Springback in Spatial Bending of Superalloy Helical Tubes |
| Elastoplastic Finite Element Analysis of Multi-body Processes for Joining Mechanical Parts |
| Electric Pulse Sprigback Reduction on AA5754 Forming |
| Electrically Assisted Pressure Joining of Cylindrical Steel Bolt and Steel Plate |
| Electrically Assisted Solid-state Joining with Plastic Deformation: Dissimilar Stainless Steel Joints |
| Elimination of Deformation Localization in the Forming of Fuselage Profiles with Variable Bending Curvatures and Sections Employing the Novel Friction Assist Stretch Bending Method |
| Energy-dependent Surface Integrity of Stainless Steel AISI 304 after Robot-based Machine Hammer Peening |
| Enhancing Tool Life by Manipulating the Punch & Die Elastic Strain Field during Forging |
 Estimation and Prevention of Strain Localization in Shear Tests |
| [Replication or Save Conflict] |
| Evaluating 980 GEN-3 Steel with Tested and Numerical Forming Limit Curve |
| Evaluating an Automated Avoidance of Ring Climbing in Radial-axial Ring Rolling |
| Evaluating the Reliability of a Nondestructive Evaluation (NDE) Tool to Measure the Incoming Sheet Mechanical Properties |
| Evaluation of isotropic and anisotropic constitutive models on plasticity prediction of AA7075 extruded tube under Tension-Tension and Tension-Compression |
| Evaluation of Lubricant Performance for Thick Sheet Ironing Process by Ball Ironing Test |
| Evaluationg of Press Forming Technique for Bent Automotive Body Parts Using In-plane Shear Deformation |
| Experimental Analysis on Granular Media Based Tube Forming with Active Axial Feed |
| Experimental and Numerical Investigation of Thermal Self-piercing Riveting Joint Performance of AA7075-T6 Aluminum Alloy |
| Experimental and Numerical Investigations into the Influence of the Process Parameters during the Deep Drawing of Fiber Metal Laminates |
| Experimental and Numerical Investigations on the Development and Stability of Residual Stresses Arising from Hot Forming Processes |
| Experimental and Numerical Studies on Plastic Deformation and Failure Behavior of Carbon Nanotube Reinforced Al Composite Sheet under Uniaxial Loading Condition |
| Experimental Assessment and Numerical Analysis of the Pillow Effect in Double-sided and Two-point Incremental Sheet Forming Processes |
| Experimental Characterization of Plasticity Increment Induced by TRIP and Its Dependence on the Annealing Temperature in Lean Duplex Stainless Steel |
| Experimental Implementation of SS 316L Cruciform Testing to Achieve Various Deformation Paths |
| Experimental Investigation and Constitutive Modeling of Dynamic Behavior and the Anisotropic Response of High-strength Lightweight AL-Li Alloys Sheets |
| Experimental Investigation of Component Contour and Cutting Offset on the Edge Fracture Behavior Using a Two-stage Shear Cutting Process |
| Experimental Investigation of Different WAAM (Wire-Arc Additive Manufacturing) Processes and Their Influence on the Component Properties and Formability |
| Experimental Investigation on Springback Behavior of Dual-phase Steel in Warm Forming |
| Experimental Investigation on the Forming Limit of AZ31 Alloy by Temperature-controlled Incremental Forming |
| Experimental Investigations for Stretch Bending of Extruded 7075 Aluminum Alloy Profile with Y-section |
| Experimental Research on Mechanics Response of Q235 Steel under Stress Cyclic Loading |
| Experimental Study and Analysis on the Effects of Cyclic Bending on the Stress-strain Curves of Aluminum Plate |
| Experimental study and modelling of stress relaxation ageing behaviour and post-form mechanical properties in creep age forming of Al-Zn-Mg alloy |
| Experimental Study of Asymmetric Rolling of Aluminum Alloys |
| Experimental Study on Texture Evolution of Mg-Y Magnesium Alloy in Extrusion |
| Experimental Study on the In-plane Torsion Test for Sheet Metal |
| Experimental Study on Uniaxial Strain Cyclic Behavior of GS-20Mn5 |
| Exploring the Fragmentation of Surface Films during Solid State Welding |
| Extrusion Technology of High-performance Aluminum Alloy Profiles with Large Complex Section |
| Fabrication of NiAl/TiAl-based Gradient Alloys by Additive Sintering |
| Failure Behavior of Cladded Steels during Bending – Experiment and Simulation |
| Fast Development of New Alloys for Metal Forming Using Additive Manufacturing |
| Fast Development of New Alloys for Metal Forming Using Additive Manufacturing
|
| Fatigue Characteristics and Failure Mechanism of Self-piercing Riveting DP590 and AA6061 Plates |
| FE-based Investigation on the Influence of Inhomogeneously Heated Billets on Subsequent Forging Processes |
| FE Simulations of Piercing and Trimming of Al Alloys and AHSS |
| FEM Analysis on Multi-pass Wiredrawing Process of Ultra-fine Steel Wire: Investigation on Stress, Strain and Hardness |
| Fine-piercing of Electrical Steel Sheets by Edge-sharpened Diamond-punch |
| Finite Element Analysis and Comparison of Sheet Flatness during Symmetric and Asymmetric Cold Rolling |
| Finite Element Analysis of Die Quenching 22MnB5 Steel Sheets |
| Finite Element Method Based on Space Mesh |
| Finite Element Modeling and Control of the Forming Temperature in Electrically-assisted Double Sided Incremental Forming |
| Finite Element Simulation and Die Design for Tube Hydro-piercing |
| Finite Element Simulation of Edge Fracture by Mapping the Shear-induced Ductile Damage into Hole-expansion Simulation |
| Flexible Manufacturing of Concave-convex Parts by Incremental Sheet Forming with Active Medium |
| Flow Behavior and Processing Map of a Nickel-based Superalloy during Hot Plastic Deformation Process |
| Fluidity of the Wood Composite Combined with Natural Binder on Injection Molding |
| Folding-shearing to Produce an Isolated Shrink Corner |
| Force-controlled Toolpaths in Metal Spinning |
| Formability Analysis of a Local Heat-treated Aluminium Alloy Thin-walled Tube |
| Formability and Damage-resistance of Laminated Steel Sheets with Non-ideal Interface Bonding |
| Formability Improvements at Room Temperature of AA5754-H32 via Continuous Bending under Tension (CBT) and Pre-forming Heat Treatment |
| Formability of Functional Corrugated Cup |
| Formation of Residual Stresses in Austenitic Stainless Steels by Infeed and Recess Rotary Swaging |
| Forming-induced Distortion of Dissimilar Ti-Al Laminated Composite Plate after Non-equal Channel Lateral Co-extrusion |
| Forming-induced Residual Stress Influence on Material Properties of Roll-Formed High Strength Martensite Steels |
| Forming Limit Results Comparing the Bragard Technique with a Statistical, Deformation-history Analysis |
| Forming of Metallic Membrane by Layered Deep Drawing |
| Forming of Parts with Locally Defined Mechanical and Ferromagnetic Properties by Flow-forming |
| Forming of PMMA Sheets by Lap Incremental Forming with Local Friction Heating |
| Forming of Spur Gear by Combination of Divided Flow Forging and Slide Motion by Using Liquid Lubricant |
| Forming Surface Texture on Copper Sheets by Electrically-assisted Micro-rolling |
| Forming the Future – Metal Forming, Innovation for Sustainability |
| Fretting Damage and Fatigue Property Analysis of Self-piercing Riveted Joints of AA5052 Aluminium Alloy |
| Friction and Thermal Insulation: Influence of Oxide Scale on Hot Forging Sequences
|
| Friction Based Solid State Recycling: An Industry-ready Technology? |
| Friction Law in Cold Metal Forming |
| Friction Stir Welding Applied in Joining of Wrought Homogenized Armor Steel |
| Friction Welding with a Metal Powder Interlayer |
| From Bridge to Bumper – Utilization of Pre-stressing during Manufacturing of Hybrid Sheet Metal Structures |
| Fundamentals of Continuous Helicoid Auger Flighting Rolling - Deformation Mechanics, Kinematics and Applications |
| Galling-free Micro-forging of Titanium Wire with High Reduction in Thickness by Beta-SiC Dies |
| General Step Reduction and Enlargement Method for Knowledge-based Process Planning of Totally Non-axisymmetric Forged Products with Blanking and Punching |
| Generation of Locally Adjusted Tailored Properties in High-strength Steels Using Contact Heating during a Press Hardening Process |
| Geometry Representation Techniques for Machine Learning Application in Incremental Sheet Forming |
| Grain size effect on formability in electromagnetically-assisted micro-bulging of pure titanium sheet |
| Grain Size Effect on the Ductile Fracture of Steel in Hot Deformation |
| Hardening/Softening Characteristics of a TRIP-assisted Duplex Stainless Steel under Cyclic Deformation |
| Heterogeneous Deformation in (α+β) Titanium Alloys: Iin-situ Explorations of Strain Localization and Its Governing Deformation Micro-events
|
| High-speed Full-field Deformation Measurement of Multi-stage Shear Cutting |
| High-speed Material Characterization Using an Instrumented Forging Hammer |
| High-temperature Properties of Hot-work Tool Steel (AISI H13) Deposited via Direct Energy Deposition |
| Hole Expansion Simulation of Steel Sheet Considering Differential Hardening |
| Hot Cutting of Press-hardened Parts in Different Heat Treatment Regimes |
| Hot Deformation Behavior and Constitutive Modeling of a Novel Ni-based Superalloy |
| Hot Deformation Behavior of Aluminum-matrix Composites Reinforced with MAX Phase in Situ by Synthesis and Sintering |
| Hot Forming Behavior and Microstructure Evolution of Intermetallic Titanium Aluminides Produced by Additive Manufacturing |
| Hot Ring Rolling and Cold Expanding Strengthening of Mn18Cr18N Thick-wall Hollow Ingots
|
| Hydro-mechanical Deep Drawing of Locally Solution Treated Aluminum Alloy Sheets |
| Identification of the Anisotropic Plastic Constitutive Parameters Using the Virtual Fields Method for AZ31B Magnesium Alloy |
| Image Feature Analysis for Magnetic Particle Inspection of Forging Defects |
| Impact of the Temperature Field of a C38 Steel Slug on its Thixoforging: Experiments and Simulations |
| Improvement of Formability of Advanced High-strength Steels: Effect of Local Stress Partitioning and Plastic Anisotropy on Residual Stress Concentration |
| Improvement on Buckling Limit of Thick Tube in Axial Compression |
| Impulse-based Residual Stress Relief |
| In-plane Stretch-bending Test for Determination of Large-strain Workhardening and Fracture of Sheet Metals |
| In Search of the Perfect Sheet Metal Forming Tribometer |
| Increased Resistance to Mixed-mode Cracking in Sharp Edges through Severe Plastic Deformation |
| Incremental Collar Forming Process for the Manufacturing of Branched Tubes and Pipes |
| Incremental Grooving of Thin-walled Tubes Filled with Discrete Media |
| Industrial Conform Experimental Methods for the Determination of Forming and Fracture Limits in Complex Bulk Forming Processes |
| Influence of Axial Feed-rate on Shape and Thickness Changes during Multi-pass Tube Spinning: Experiments and Modelling |
| Influence of Deformation on Texture Development during Cold Drawing of Tubes |
| Influence of Forming Conditions on Metal Flow and Lubrication in Cold Backward-cup Extrusion |
| Influence of Loading Path Change on Fracture of an Aluminum Alloy |
| Influence of Material Delivery Condition on Residual Stresses and Part Properties during Forward Rod Extrusion |
| Influence of Quenching Temperature on Microstructure and Mechanical Properties in Cu-containing Quenching and Partitioning (Q&P) Steels |
| Influence of Sample Shape on Distributon Uniformity of Shear Stress in Pure Shear Test of Tubes |
| Influence of Shear Cutting Process Parameters on the Residual Stress State and the Fatigue Strength of Gears |
| Influence of Specimen Preparation Methods on the Mechanical Properties and Superplastic Behavior of AA5083 Sheets |
| Influence of Strain on the Site Occupancy of Hydrogen in Alpha- zirconium from the First-principle Calculations |
| Influence of the Process Parameters on Orange Peel Effect in AZ31 Warm Incremental Forming |
| Influence of the Quenching Rate and Natural Ageing Duration on the Formability and Mechanical Properties of EN AW-7075 |
| Influence of Ultrasonic-assistance on the Forming Limits of Steel |
| Influences of Key Forging Parameters on Cold Orbital Forging of Thin Parts with High Circular Ribs |
| Inline Combination of Flow Forming and Radial Profiling for the Production of High Accuracy Profiled Hollow Parts |
| Innovative Simulation Strategy for the Mastering of Tribological Surface Transformations |
| Instability Analysis in Incremental Rotary Forming of Tube Flanges |
| Intelligent Materials Testing for Hot Forming of Aluminium Sheet Metal |
| Introduction of a New Method for Continuous Aluminum Hot Extrusion |
| Investigating Plastic Anisotropy of Al7079 Using Crystal Plasticity Simulations |
| Investigation into Microstructure Evolution during Hot Compressions of Mg-Al-Zn-RE Alloy |
| Investigation of a Novel Constructive Hot Ring Rolling Process for Double Metal Composite Ring |
| Investigation of an Integrated Process for Bending and Cross Section Forming of Tubular Lightweight Parts Based on a Working Media Made of Materials with High Plasticity |
| Investigation of Directional Effects of Deep Rolling Process on Plastic Deformation and Residual Stresses Using Finite Element Analysis |
| Investigation of Effects of Part Features in Single Point Incremental Forming of Narrow Channels
|
| Investigation of Failure Mechanisms of Cemented Carbide Fine Blanking Punches by Means of Process Forces and Acoustic Emission |
| Investigation of Forward–Backward-Radial Extrusion Process of Aluminum Alloy Wheel Hub |
| Investigation of Machine Learning Models for a Time Series Classification Task in Radial-axial Ring Rolling |
| Investigation of Multi-layered Sheets Formability Manufactured by Accumulative Roll Bonding |
| Investigation on Austenite Transformation Kinetic Mechanism of Ultra-high Strength Steel by Rapid Heating |
| Investigation on Dynamic Recrystallization Behavior of a Typical Ultrahigh Strength Steel by Cellular Automaton Simulation |
| Investigation on Springback Behavior of Multi-intersecting High Stiffened Structure in Die Forming |
| Investigation on Stress-relaxation Ageing Behavior and Mechanical Properties of AA2219 Alloy Under Different Pre-deformations |
| Investigation on the Evolution of Damage and Microstructure in Hot Flat and Caliber Rolling of Steels |
| Investigation on the In-plane Anisotropy and Tension-compression Asymmetry of Twin Roll Cast and Hot Rolled AZ31 Magnesium Alloy Thin Sheet with Modified Sample Geometry |
| Investigation on the Whole Forming Process of Super-large Flat Ring |
| Investigations and Applications of Multi-stage Semisolid Forming on Manufacturing of Ferrous and Non-ferrous Alloys Components |
| Investigations and Improvements in 3D-DIC Optical Residual Stress Analysis – A New Temperature Compensation Method |
| Investigations on Dynamic Characteristics of a Mechanical Press Considering Both Translational Clearance Joint and Lubrication Effect |
| Large Strain Flow Curve Determination for Sheet Metal |
| Limit Rolling Forming of Pulsed Electric Current Excitation Stainless Steel Foil Strip |
| Liquation Cracking Susceptibility of FeMnAl Alloys for Armor Applications |
| Local Creation of Uniform Residual Stresses into Sheet Metal Components by Means of Multiple One-sided Embossing |
| Local Microscopic and Integral Macroscopic Analysis of Magnetic Pulse Welds and Deformations for Dissimilar Metal Joints |
| Localized Adjustment of the Tribological System via Porous Tool Inserts Generated by Laser Beam Melting (LBM) |
| Localized Contact Pressure of Blankholder for Stamping Irregular Sheet Parts by Configuring the Height of the Supporting Elements |
| Low Temperature Forging of High Strength CP Ti |
| Machine Learning Based Prediction and Compensation of Springback for Tube Bending |
| Macro- and Micromechanical Investigations on Residual Stresses in Extruded Components
|
| Macro Deformation Characteristics of Medium Mn TRIP Steel Affected by Loading Stress States and Phase Transformation |
| Manufacturing of Circle Knife Blades with Modified Spin Forming Process |
| Manufacturing of Shape Memory Alloy Pipe Coupler: Modeling and Application |
| Manufacturing of Tailored Blanks with Pre-shaped Involute Gearings by Using a Flexible Rolling Process and Its Application in a Sheet-bulk Metal Forming Process |
| Manufacturing Processes of Non-metallic Materials |
| Material Characterization and Numerical Modeling of Incremental Forming Processes |
| Mathematical Model and Quantitative Analysis of Residual Stress Hole during Laser Shock Peening |
| Measurement of the Residual Stress in Tube Spinning Process by Using Slitting Method |
| Mechanical Behavior of Third Generation Advanced High Strength Steel under Simple Shear and Reverse Loading: Experimental and Theoretical Approach |
| Mechanical Properties of Aluminum-stainless Steel Bimetal Composite Fabricated by Extrusion Process |
| Metal Foils for Bipolar Plates – Correlation of Initial Grain Size and Forming Behavior of 316L |
| Methods and Mechanisms to Uniformly Refine Deformed Mixed and Coarse Grains Inside a Solution-treated Ni-based Superalloy by Heat Treatment |
| Methods for Increasing the Durability of Forging Tools - Comprehension Review and Outlook |
| Microscale Pattern Replication in Aluminum: Mechanical Response and Incomplete Die Filling in a Double-punch Molding Configuration |
| Microstructural Evolution of Ti-55511 Titanium Alloy during Quasi-beta Forging |
| Microstructural Influences on Grain Boundary Sliding in High Purity Aluminum |
| Microstructure and Mechanical Properties Evolution of Pure Ti microtube in Cyclic Rotating Bending Process |
| Microstructure and Mechanical Properties of 5CrNiMoV Steel under Inhomogeneous Deformation |
| Microstructure and Thermomechanical Properties of AA7075 Sheet Metal Processed by ECAP |
| Microstructure Evolution during Isothermal Forging of 7A85 Aluminum Aviation Component |
| Microstructure Evolution of 300M Steel in Dynamic Recrystallization Investigated by In-situ and Ex-situ Experiments |
| Microstructure Evolution of AA-7075 Sheets Subjected to Repetitive Bending under Tension |
| Microstructure Informed Deformation and Fracture Model for High-strength Steels |
| Modeling and Experimentation of Microcontact Tool/Chip during the Micromachining Process |
| Modified Slip-line Model for Serrated Chip Formation in Machining of Ti6Al4V Alloy |
| Multi-field Simulation of the Autoclave Age Forming Process of 2524 Al Alloy Component |
| Multi-objective Optimization of Elbow-bar Transmission Mechanism Based on Virtual Prototyping |
| Multi-scale Modeling of Zirconium Alloys Recrystallization, Application to Thermo-mechanical Processes Optimization |
| Multi-scale Plasticity Modeling for Sheet Metal Forming Considering Texture Gradient and Microstructural Statistics |
| Multi-step Single Point Incremental Forming Strategies for Non-axisymmetric Components |
| Multiscale Modeling of Self-piercing Riveting Process |
| Neural Network Surrogates Model for Metals Undergoing Yield Point Phenomena within Finite Element Analysis |
| New Generation Press Hardening Steels with Tensile Strength of 1.7-2.0GPa and Enhanced Bendability |
| New Methods for Fracture Detection of Automotive Alloys
in the VDA238-100 V-Bend Bend Test
|
| New Methods for Fracture Detection of Automotive Steels |
| Non-isothermal modeling of static recrystallization in hydroformed steel tube using a coupled Cellular Automata and Finite Element model |
| Nonlinearity of the Crystal Yield Function in the Rate-independent Crystal Plasticity and Its Effect on the Evolution of Anisotropy |
| Novel Concepts to Optimize Pass Schedules for Rolling in the Context of Ongoing Digitalization |
| Novel Roll Bonded Stainless Steel / Boron-steel Multilayer under Hot Stamping Conditions |
| Numerical and Experimental Investigations on Riveting Assembly Processing Parameters of Hub Bearing Unit |
| Numerical and Experimental Study of Abrasive Belt Grinding for Single Crystal Aero-engine Blades |
| Numerical Modeling of Ductile Damage during Metal Forming: State of the Art and Future Challenges |
| Numerical Modelling and Deformation Mechanics of the English Wheel Process |
| Numerical Modelling and Experimental Investigations of Steel and FRT Considering a Combined Forming Process |
| Numerical Modelling of the Flow Forming Process: Computation Time Optimization and Accuracy Analysis |
| Numerical Simulation of Pipe Bending Supported by Hydraulic Pressure for Manufacturing Butt-welding Fittings |
| On Deformation of Metals under Complex Loading |
| On Edge Crack Initiation of an Aluminum Sheet Metal |
| On Sampling Discrete Orientations for Texture Representation in Aggregates with Varying Grain Size |
| On the Characterization of Fracture Loci in Thin-walled Tube Forming |
| On the Convexity Bound of the Generalized Drucker's
Yield Function CB2001 for Orthotropic Sheets |
| On the Determination of the Forming Limits by Necking and Fracture of Polycarbonate Sheet |
| On the Formation of Shear Bands and Fracture in Cutting of Metals |
| On the Geometrical Accuracy in Incremental Sheet Forming |
| On the Newly Proposed Shear Constraint for
Orthotropic Plasticity Modeling of Sheet
Metals |
| On the Potential of Machine Learning Algorithms to Predict the Plasticity of Sheet Metal |
| On the Simulation of Quenching Processes Using a Full Eulerian FE Framework |
| Open-die Forging of Copper Cone |
| Optimization in Mechanical Properties of Multilayered 1100/7075 Aluminum Alloy Laminated Metal Composite Fabricated by ARB |
| Optimization of Lattice Structures for Additively Manufactured Interpenetrating Composites |
| Optimization of Open-die Forging Using Fast Models for Strain, Temperature and Grain Size in the Context of an Assistance System |
| Oscillation-free Determination of Material Properties at High Strain Rate |
| Partial Dislocation Slip-induced Mechanical Twin Evolution of Single Crystal Using Discrete Dislocation Plasticity Model |
| Penetrating Tool Friction Stir Incremental Forming Using Alternating Tool Path Direction |
| Phase-field Modelling of Ductile Fracture to Describe Edge Conditions in Local Formability Studies |
| PID Controller Integrated with FEM Model to Generate Boundary Conditions for Free Tube Bulging for Tubular Material Characterization |
| Plane Strain Analysis of Sheet Metals for Constitutive, Formability, and Fracture Characterization |
| Plastic and Fracture Characteristics of WE43 Mg Alloy Under Complex Stress States |
| Plastic Behavior Characterization of Magnesium Alloy Sheets Based on Mesoscale and Macroscale Models |
| Plasticity and Ductile Fracture of Ultra-high Strength Steel Sheets under Complex Stress State: Experiments and Modeling |
| Plasticity Improvement of CNTs/Mg Nanocomposite Materials Processed by Combining Friction Stir Processing and Ultrasonic Assisted Extrusion |
| Possibility of Shear Forging as the Third Basic Process of Cold Forging |
| Pre-forging Shape Design Using Conformal Mapping Method |
| Precipitation and Orientation Evolution Mechanisms of α Phase in Ti-55511 Titanium Alloy |
| Predicting Fracture of Severe Pre-strained EN-AW 5182 during Hot-stamping Operations: A Thermal Extension of GISSMO and the Hosford-Coulomb Fracture Model |
| Prediction Limits of Air Bending |
| Prediction of Forming-induced Damage in Deep Drawing of Dual Phase Steel via Coupled Plasticity-continuum Damage Mechanics |
| Prediction on Microstructure of Large Scale Hot Forged Ni-based Super Alloy |
| Predictive Model for the Strength of Self-piercing Riveted Joints |
| Preform Shape and Die Wear Optimization of Near Net Shape Forging of Gear Part |
| Prevention of Delayed Cracking of Punched Ultra-high Strength Steel Sheets by Ironing with Scrap |
| Process Development for Mechanical Joining of Aluminum Alloys and Thermoplastics Using High-frequency Preheating |
| Process Optimisation Using a Data Guided Online Platform |
| Processing Path Design in Multiphase Structures |
| Professor Ruan and the International Cold Forging Group (ICFG) |
| Professor Z.R. Wang's Contributions to Metal Forming Theory, Technology and Education |
| Prof. Yasuhisa Tozawa's Achievements in the Field of Metal Forming |
| Pushing Forward the Limit of Transformation-induced Plasticity (TRIP) Effect: Nnew Strategies in Mechanically Metastable Alloy Design
|
| Rate Dependent Hardening Behavior of Autobody Sheet Metals in Tension and Compression |
| Recent Advances in Sheet and Tube Hydroforming |
| Recent Advances on Modeling Plastic Deformation of Textured Metals with Applications to Metal Forming |
| Recent Investigations on Incremental Sheet Forming: From Fundamentals to Industrial Application Technologies |
| Reducing aluminum extrusion transverse weld process scrap |
| Relating Microstructure to Deformation in Al Alloys via Multiscale Electron Microscopy |
| Relaxation Characteristics of Creasing Process of Scored Paperboard for Liquid Container |
| Research of Press Forming of CFRTP under the Control of a Distribution of Temperature and Blank Holder Force |
| Research on Crack Evolution Behavior in Ti/Al Laminated Composite |
| Research on Microstructure Revolution and Critical Strain of Dynamic Recrystallization of 6082 Aluminum Alloy in Thermal Deformation |
| Research on New Hot Stamping Tool with Low Cost and High Efficiency Cooling |
| Research on Rolling Process and Superplasticity for 5A90 Al-Li Alloy |
| Research on the Dynamic Recrystallization Model and
Microstructure Simulation of Cr8 Alloy Steel
|
| Research on the Forming Mechanism of the Haynes 230 Alloy Conical-cylindrical Parts Manufactured by Composite Spinning |
| Research on the Mechanism of Pulse Current Assisted Titanium/Stainless Steel Rolling |
| Research on the Thermoplastic Formability of Lightweight Ti-based Bulk Metallic Glasses |
| Research Progress on Advanced Forming and Performance Strengthening of Complex Thin-walled Aluminum Alloy Components |
| Residual Stresses in Hot Bulk Formed Parts – A Phenomenological Approach for the Austenite-to-Martensite Phase Transformation |
| Rim Thickening of Disk-like Parts Using Spinning |
| Robotic roller forming process and strategies to eliminate geometrical defect of edge waves |
| Role of Misorientation on Grain Boundary Sliding through High-Resolution Digital Image Correlation |
| Roll Forming of Cup with Curved Rotary Profile |
| Roll Pass Optimization of Round Bar Continuous Rolling |
| Rolling Machine Modification for Large Gear Applications |
| Self-optimized, Intelligent Open Loop Controlled Steel Strip Straightening Machine for Advanced Formability |
| Self-piercing Riveting Using Rivets Made of Stainless Steel with High Strain Hardening |
| Shaping of Sharp-edged Design Elements by Electromagnetic Forming |
| Shear Punch Test to Assess the Shear Formability of 304 Stainless Steel |
| Simulated Microstructure Effects on Macroscopic Mechanical Properties Based on Multiscale Crystal Plasticity |
| Simulation and Experimental Analysis of Magnetic Pulse Spot Welding of Sheet Metal with a Field Shaper |
| Simulation of Cold Forging Processes Using a Mixed Isotropic-Kinematik Hardening Model |
| Simulation of Plastic Deformation Induced Texture Evolution Using the Crystallographic Homogenization Finite Element Method |
| Simulation on Dynamic Recrystallization of Magnesium Alloy by Cellular Automaton Method Coupled with Adaptive Activation Energy and Matrix Deformation Topology |
| Simulation Study on Hot Rolling of Bimetallic Casting Ring Blank |
| Simulations of Grain Growth with Arbitrary Grain Boundary Energy |
| Size Effect on Cyclic Deformation Behavior and Springback Prediction of Ultrathin Superalloy Sheet |
| Spot Butt Friction Stir Welding of Thin Stainless Steel Sheets |
| Spring-back Prediction of U-section Curve Beam in the Stamping process |
| Springback Prediction in Microbending Process of Pure Copper Foils Using Modified Material Intrinsic Length in Material Model |
| State of the Art in Finite Element Modeling of Ring Rolling Processes |
| Statistical Analysis of Microscopic Strain Localization and Its Strain Level Dependence |
| Strain-rate-sensitivity Calibration of Aluminum Alloy Sheet by Electromagnetic Flanging of Circular Hole |
| Strain Hardening of AA5182-O Considering Strain Rate and Temperature Effect |
| Strain Rate Dependent Damage and Failure Modeling of a Quenched-and-partitioned Steel |
| Strength Prediction Model for Line Pipe Steels Subject to Multiple Deformation Paths |
| Stress-based Ductile Fracture Criterion for Nonlinear Strain Paths with Model Calibration |
| Stress-relaxation Age Forming of A Component with Complex and Large Curvatures: Simulation and Manufacturing |
| Study of Central Bursting Defects in the Process of Cross Wedge Rolling for TC4 Alloy Part |
| Study of Hydrogen Embrittlement Behavior of Hot-stamped Ultra-high Strength Steel |
| Study of the Influence of the Mixed-grain Structure on the Microscopic Deformation Behavior of 316LN Steel |
| Study on Back-propagation Artificial Neural Network Model of TC4 Titanium Alloy |
| Study on Burring Operation During the Quenching Process of Press-hardened Steel For Mechanical Fastening |
| Study on Complex Extrusion of Multi Billets: Evaluation of Mechanical Properties of Butt-joined Products and Analysis of Joining State |
| Study on Microstructure Profile of the Formed Magnesium Alloy |
| Study on Precision Forging Methods of Difficult-to-knockout Components with Non-parallel Internal Grooves |
| Study on the Effect of Embossing on the Bending Properties of High Strength Sheet Metals |
| Study on the Transferability of Rolling with Ordered Texturing Roll |
| Superplastic Forming Application in CubeSats Structures |
| Surface Quality of Extruded Sidewall in Cold Backward Cup Extrusion with Low-frequency Torsional Oscillation |
| Surrogate Modelling of Search Range in Polyhedron Flow Stress Model Identification with Inverse Analysis and Cylindrical Compression Test |
| T8 Heat Treatment Effect on Wear Behavior and Microstructure of Cryo and RT Ecaped Al 6063 |
| Tailoring Material Flow in Bobbin Tool versus Standard in Friction Welding: Avoiding Premature Failure and Improving Mechanical Properties in FSW AA6082-T6 |
| Temperature and Deformation Modeling for the Friction Stir Welding Process in AZ31 Magnesium Alloy |
| Temperature Dependent Fracture Loci Of AZ31 Magnesium Alloy Sheets |
| Tensile Mechanical Properties of Steel-Al Explosion-bonded Clad Plate |
| Testing Method of Anti-galling Ability of Lubrication Coatings in Multi-stage Cold Forging |
| Texture Evolution in the Micro-scaled Deformation of Pure Titanium |
| The Deformation and Microstructure Analysis of Medium Carbon Steel during Die Forging Process and the Effect of Microalloying Elements |
| The Dieless Drawing Process for the Elongation of Ultrafine Copper and Brass Wire |
| The Effect of Crystallographic Texture Gradients on the Mechanical Response of Aluminum Automotive Extrusions |
| The Effect of Electroplasticity on the Flow Behavior of AA7075 in T6 Temper |
| The Effect of Interface Cohesion on Layer Stability during Accumulative Roll Bonding of Cu/Ta Multilayers |
| The Effect of Temperature on Strain-induced Austenite to Martensite Phase Transformation in SS 316L during Uniaxial Tension |
| The Effect of Trace Nitrogen on Microstructure and Property of Cr-Mo-V hot-working Die Steel |
| The Effect of Ultrasonic Vibration on Material Movement in Incremental Sheet Forming |
| The Effects of the Shearing Speed on the Sheared Edge Quality and Edge Cracking |
| The Evolution of Deformation Microstructures and Strain Hardening during Constrained Sliding with Implications for Metal Forming and Cutting Processes |
| The High-Speed Deformation Behavior of High-Strength Lightweight AL-Li Alloy Sheets |
| The Influence of Size Effect on Shear Damage of Metallic Materials in Micro/Meso Scale and Low Triaxiality Plastic Deformation |
| The Influence of Temperature and Strain Rate on the Superplastic Deformation Behavior and Microstructure Evolution of TNW700 Alloy |
| The Local Strain Evolution for Structured Sheet Metals during Uniaxial Deformation |
| The Mechanism Investigation of Deformation-induced Martensite Transformation in a Novel Low-Ni High-Mn Austenitic Stainless Steel |
| The Modification of Hill’s 48 Yield Criterion for the Strongly Anisotropic Al-Mg-Li Sheet and Its Application in Predicting the Forming Limits |
| The Process Design to Control the Yield Ratio of Yield-Ratio-Control-Steel on Both Wire Production and Forging Process |
| The Rolling Process for Thin-walled Ring with Island Bosses on Outer Surface |
| The Study of Energy Absorption of Dual-material Tailored Plane Strain Sheet |
| The Study of Microstructure ASTM 1045 after Surface Plastic Deformation Multiradius Roller (MR-roller) |
| Theoretical and Experimental Determination of the Peak Pressure of the Impact Hydroforming Technology |
| Thermal-mechanical Property and Microstructure Evolution of Additive Manufactured Maraging Steel |
| Thermal Relaxation of Cold-rolled Copper Based on Modified Power Law Creep Model |
| Thermomechanical Analysis and Experimental Validation of ECAP for Aluminum Sheet Metal |
| Three-dimensional Analysis of Strip Rolling by Coupling Elastic Deformation of Rolls and Rolling Mills |
| Titanium Alloys Lined and Clad Construction, Process Challenging and Improvement
|
| Toolpath Development for Industrial Mandrel-free Spinning |
| Topological Deformation and Nucleation in Dynamic Recrystallization Numerical Simulation Based on Multi-space Cellular Automata Method |
| Towards an Efficient Industrial Implementation of W-temper Forming for 7xxx Series Al Alloys |
| Towards Room-temperature Forming of Magnesium Sheet Alloys |
| Transcription of Mirror-finished Surface onto A5083 Aluminum Alloy Plate by Friction Stir Forming |
| Transformation of α→β during Hot Deformation in the Two-phase Region of Ti-6Al-2Zr-1Mo-1V Alloy |
| Tribological Conditions in Hot Bending of 22MnB5 Tubes |
| Tube Forming and Fabricating Technologies for Contributing Society by Tackling Problems of Environment and Aging Population |
| Tube Roll Forming Flower Design and Flexible Roll Adjustment with CAE Simulation |
| Ultrasonic Forming - Alternative to Orbital Riveting for Small Bimetallic Components |
| Ultrasonic Processing of Ultrahigh Strength Nanostructured Materials |
| Ultrasonic Processing of Ultrahigh Strength Nanostructured
Materials |
| Ultrastrong Stable Extremely Fined Nanocrystalline Steel |
| Understanding the Microscale Plastic Behavior and Deformation Mechanism of Magnesium Alloy via Ex-situ Experiments and Full-field Crystal Plasticity Modeling |
| Using Local Heat Treatment for Producing Uniform Profile Hollow Components by Radial Rotation Profile-forming |
| Using Plasticity for Making High-performance Nanostructured Composites |
| Vacuum Hot-roll Bonding of Titanium and Carbon Steel Using Pure Iron Interlayer |
| Validation of Automatically Generated Forging Sequences Using FE Simulations |
| Validation of Material Models for Thick Sheet Metals |
| Wave Formation and Temperature Distribution of Joint Interface in Al/Steel Impact Spot Welding |
| Welding of Aluminum in Chip Extrusion |
| Work Hardening and Fracture Strain Measurement of Hardened SKD11 Steel Using Shear Punching Test |
| Wrinkling Limit Diagram (WLD) Establishment and Influencing Factors Investigation for Sheet Metal Plastic Wrinkling under Nonuniform Tension |
| "Learning by Seeing": Estimating Metal Plasticity Parameters Using In Situ Observations of Cutting and Indentation |
| (Mon. or Tues. ONLY) Data Preparation in the Digital Material Representation Based 3D Cellular Automata Model of Static Recrystallization |
| (SEE NOTE) Modeling of Forming Induced Residual Stress Effects on Fatigue Life of Full-forward Extruded Rods |