ProgramMaster Logo
Conference Tools for MS&T22: Materials Science & Technology
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting MS&T22: Materials Science & Technology
Symposium 14th Symposium on Green and Sustainable Technologies for Materials Manufacturing and Processing
Presentation Title L-8: Fly Ash Bricks: An Ecofriendly Construction Material, Its Properties and Uses in Different Environmental Areas (A Review)
Author(s) Manpreet Kaur Chahal, Onkar Singh Sidhu
On-Site Speaker (Planned) Manpreet Kaur Chahal
Abstract Scope Fly ash is generated in huge amount from thermal power plants as waste material, but it has advantages over the cement, clay and bricks that has been used in buildings, houses etc. in different parts of the world. Many researchers observed that heat emitted from cement enhanced the global warming. Besides this, bricks made from red clay causes removal of top soil which results in land degradation. The bricks that are made up of fly ash are relatively lighter in weight and stronger than common clay bricks. Along with this, fly ash is also used as a good fertilizer to crops and also be considered as a potential growth activist. Due to above environmental issues like soil infertility, solid waste, in many nations’ this wastes has been recycled into eco-friendly products that has been used as construction material. Key words:- Fly ash, Fly ash bricks, cement and clay bricks

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

A Computationally Engineered Sustainable Approach for Tuning Nanoclays for Biomaterials Applications
Application of Animal Bone Residue as Portland Cement Concrete Ingredient
Capture of Plant Nutrients by Ceramics for Subsequent Use as a Slow Release Fertilizer
Change in the Density Distribution during Sintering of Alumina Ceramics Visualized by In-situ OCT Observation
Critical Metals Recovery from Recycled Lithium-ion Batteries
Design and Development of Novel Structural Materials from Biomass
Direct Selective Laser Sintering for Additive Manufacturing of Advanced Ceramic Materials
Effect of Hydrolysis on Mechanical Properties of Rice Husk Reinforced Composites for 3D Printing
Effect of RHA Biochar Calcination on Structural, Thermal, and Morphological Properties of BaO-B2O3-SiO2 Glass System-based Coatings
Electrochemical Remediation of PFAS-Contaminated Aqueous Waste Streams
Enabling Sustainability and Circularity Through Big Area Additive Manufacturing
Glasses as Energy Materials for a Sustainable Development
Green Routes to Materials Via Reaction of Metal Oxides with Aqueous Reagents
How to Start and Maintain a Low-cost Ceramic Water Filter Factory
In-situ Observation of Evolution of Internal Structure of Alumina Slurry During Drying by Optical Coherence Tomography
L-10: Purification of an Indigenous Barite Mineral for Sustainability of Operation in the Nigerian Oil and Gas Industries
L-11: Solar Energy Sizing for an Irrigation System for Field Maintenance
L-12: Sustainable Waste Processing Through Modular Anaerobic Digestion
L-1: A Review of Minerals for Design of Sustainable Materials
L-2: A Review on the Utilization of Fly Ash
L-3: Characterization of a Natural Mixed Fibers Functional Groups by Infrared Spectroscopy
L-5: Effect of Sodium Silicate/ Sodium Hydroxide Ratio on Compressive Strength and Microstructure of Kankara Metakolin Based Geopolymer
L-6: Evaluation of Dewaxing Behavior of Alumina Green Body by a Combined OCT/TG/FT-IR System and Thermomechanical Analysis
L-7: Fabrication of Blue-light Emitted and Transparent Lu-α-SiAlON:Ce3+ Ceramics
L-8: Fly Ash Bricks: An Ecofriendly Construction Material, Its Properties and Uses in Different Environmental Areas (A Review)
L-9: Green Synthesis of ZnO Nanoparticles Using Lemongrass Extract and Measurement of Their Antibacterial Activities
Low Temperature Molten Salt and Microwave Co-assisted Synthesis of Advanced Ceramics for Demanding Applications
Machine Learning-driven Studies of Carbon Capture and Storage
Mesoporous TiO2 as an Alternative Anode for Fast Chargeable Lithium-ion Battery
New Construction Materials from Engineered Alkali Activation of Waste Glasses
On the Design of Radio Frequency Sensors Using Recyclable Materials
Potential of Matter Organic Non-glycerol (MONG) from Soy Biodiesel Plants In 3D Printing
Preparation of Inorganic Green Pigments via a Green Process
Protective Coatings for Lunar Dust Tolerant Applications
Rapid Fabrication of SiC Composites by Selective Laser Sintering and Direct Liquid Silicon Infiltration
Selective Eliminate the Risk of High Toxicity Mercury from Valuable Selenium-enriched Material Using Vacuum Volatilization
SiOCN Corrosion Resistant Coatings on Stainless Steel
Substrate Orientation and Rare-earth Doping Effects on the Bandgap Engineering of Epitaxial β-(AlxGa1-x)2O3 Films
Sustainable Processing of Composite Materials
The Effect of Sawdust Particle Size Distribution on the Hydraulic Conductivity of Low-cost Ceramic Water Filters
Thermal Insulators Prepared by Gelation Freezing Route and Their Energy Efficiency in Prototype Furnace

Questions about ProgramMaster? Contact programming@programmaster.org