ProgramMaster Logo
Conference Tools for 2024 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2024 TMS Annual Meeting & Exhibition
Symposium High Performance Steels
Presentation Title Effects of Si and Al on Microstructures and Properties of As-cast AHSS Slabs
Author(s) Nhu N. Ngo, Bryan Webler, Chris Pistorius
On-Site Speaker (Planned) Nhu N. Ngo
Abstract Scope In recent years, the demand for developing Advanced High-Strength Steels (AHSSs) has increased to improve ductility, emissions and passenger safety while being economical. The development of third generation AHSSs aims to enhance strength and tensile formability. To do so, it is necessary to understand the microstructures within the alloy. However, differences in the microstructures of Si and Al slabs are still unknown and the question of the microstructure's influence on the alloys' properties remains. This study investigates the differences in the Si, Al and combined Si and Al effects on the microstructures of as-cast slabs with 0.2 wt.%C and various Mn concentration along with the difference in grain sizes at room temperatures. The results can be used as a starting point to further understand the mechanisms of Si and Al on crack propagation involving differences in microstructures, hardness and grain sizes of the as-cast slabs.
Proceedings Inclusion? Planned:

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

A Neural Network Interatomic Potential for á-Fe-C-H Ternary System
A Novel Design of 2000 MPa Grade Press Hardening Steel
Advanced Metallurgical and Micromechanical Modelling to Deploy the Microstructural Tailoring Potential of Press Hardening- MiPRE
Boron Segregation Behavior in a Microstructure Complex Multiphase Lightweight Steel
Characterizing the Microstructural Evolution in Resistance Spot Welded MS1500 Advanced High Strength Steels
Crystal Plasticity-based Finite Element Simulations of Hat-shaped Draw-bending to Predict Springback Behavior of Dual-phase Steels
Development of Advanced High Modulus Steels for Automotive Applications
Development of Creep Resistant Ferritic-martensitic Steels for Operation at 650°C
Digital Design of a Lightweight and Low-cost UHS Steel
Effect of Carbon Content on the Critical Intergranular Fracture Stress in Tempered Martensitic Steels
Effect of Mo Segregation in Hot-rolled Ferritic-bainitic Steels with Nb and Mo Alloying
Effect of Vanadium on the Mechanical and Microstructural Properties of Medium-Mn Steels
Effects of Cerium Content on the Microstructure and Mechanical Properties of Steel
Effects of Plastic Deformation on Austenite Formation in a High-Ni Martensitic Steel
Effects of Si and Al on Microstructures and Properties of As-cast AHSS Slabs
Engineering Non-equilibrium L12-NiAl Phase to Form a Nano-precipitate Strengthened Austenitic Steel
Enhancing Microstructural and Mechanical Properties of Structural Sheet Steels by Metal Peeling
Evaluating Strengthening and Impact Toughness Mechanisms for High Strength Ni-Mo Alloyed Thick Plates
High-performance Laminated Steels with Superior Strength-ductility Synergy via Additive Manufacturing
High Throughput Approaches for Sublattice Alloy Design of High Performance Nitriding Steels
Hydrogen Trapping and Hydrogen Embrittlement in Hybrid Steel Strengthened by Dual Precipitates
Influence of Rare Earth Ce Additions on Microstructure and Mechanical Properties of HSLA Steels
Investigating the Effects of Weld-bonding in Ultra-high Strength Steel (UHSS) Performance
J-24: Effect of Deformation Temperature on Strengthening Mechanism in Fe-22Mn-0.6C
J-25: Evaluation of the Correlation between Hardness Distribution and Hole Expansion Ratio on Complex-phase Steel by Using Nanoindentation
J-26: Investigating the Effects of Heat Treatment on the Microstructure and Mechanical Properties of Low Carbon, Low Alloy, and High Yield Strength Steels Undergoing Temper Embrittlement
Metastable Phases in Additive Manufacturing Produced Maraging 300 Steel
Microstructure and Mechanical Properties of a Stainless Steel Designed for Additive Manufacturing
Modeling Creep Deformation in Diffusion Bonded 316H Stainless Steel Microstructure
Modeling Magneto-structural Interactions in Austenitic Steels Using First-principles Calculations
Reducing Hydrogen Embrittlement by Controlling Boron Segregation in Martensitic Steel
Studying Microstructural and Mechanical Properties Variations through the Thickness of a 22-mm Thick Gauge X70 Line Pipe Steel
The Effects of Molybdenum Segregation on Mechanical Behavior in Maraging Steel Processed by Wire Directed Energy Deposition
Under Deposit Corrosion
Understanding the Cl Distribution Resulting from Under Deposit Corrosion in Industrial Boiler System Steels
Yield Stress Anisotropy of Carbon Steel with Elongated Pearlite
Zn Segregation at Grain Boundaries during Liquid Metal Embrittlement in the Fe-Zn System

Questions about ProgramMaster? Contact programming@programmaster.org