Conference Logo ProgramMaster Logo
Conference Tools for 13th International Conference on the Technology of Plasticity (ICTP 2021)
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools

About this Abstract
Meeting 13th International Conference on the Technology of Plasticity (ICTP 2021)
Symposium 13th International Conference on the Technology of Plasticity (ICTP 2021)
Presentation Title Effect of Blanking on Magnetic and Mechanical Properties of Non-oriented Electrical Steel
Author(s) Ronggao Cui, Shuhui Li, Ji He
On-Site Speaker (Planned) Ronggao Cui
Abstract Scope World-wide blanking is the most popular technique for producing the non-oriented electrical steel lamination. However, blanking has a great effect on magnetic property and mechanical property, such as the introduction of uneven residual stress, the deterioration of magnetic properties and the increase of micro-hardness. In this research, non-oriented electrical steel sheets are investigated via blanking test by 3 kinds of punches. The blanking edges are examined by the optical microscopy and micro-hardness test to visualize the distribution of micro-hardness. The magnetic properties are also measured. The results show that the blanking clearance has a great influence on magnetic properties and mechanical properties of the blanked material.
Proceedings Inclusion? Definite: At-meeting proceedings

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

50 Year’s Research and Development on Metal Forming and Joining
A Brief Review on Theoretical Aspects of Bar Straightening with Recent Developments in its Modelling, Simulation, Control System and Stabilisation
A Computational Study on the Producible Rolling Thickness in Ultra-thin Strip Rolling
A Contact and Friction Model for Forming of Galvanized Steel Sheet Based on Fractal Theory
A Critical Review on the CPFEM Models Accounting for Gain Boundary Hardening Effect and Some Developments toward Simplification of the Wagoner Super-Dislocations (SD) Model
A Fast Computational Model for the Local Stress Distribution and Mechanical and Thermal Work Roll Deformations with Effects on Strip Profile and Flatness during Hot Rolling of Strip in Four-high Mills
A FE Billet Model and A Spring-mass-damper Press Model for the Simulation of Dynamic Forging Process: Application to a Screw Press
A New Approach for the Production of Burr-free Sheet Metal Components Having Significantly Increased Residual Formability
A New Criterion for Triclinic-asymmetric Yielding: Implicitly Describing Anisotropy and Distortional Asymmetry
A New Non-destructive Testing Method Applied to Clinching
A New Test Method for Sheet Metal Deformation Subjected to Tension under Cyclic Bending and Compression (TCBC)
A Novel Approach to Predicting Surface Properties Generated during Metal Forming Processes
A Novel Flexible Skew Rolling Process for Step Shafts: Feasibility Study
A Plasticity Framework for Forming Applications
A Predictive Strain-gradient Treatment with No Undetermined Constants or Length Scales
A Study of the Forming Quality of Magnesium Alloy Cylindrical Parts with Inner Ribs by Induction-heating Assisted Spinning
A Vision of Numerically Controlled, Autonomous Manufacturing and Metal Forming
Accurate Mapping of Thermal Camera Measurements on Planar Deformations
Accurate Modelling of Flow Stress of AISI1025 at Room Temperature and Its Application to Precision Forging Simulation
Achieving an Interference Fit between Two Rings during Composite Ring Rolling
Adding Value by Advancing Metal Forming
Adjusting Product Properties by Deliberate Induction of Residual Stresses in Single Point Incremental Forming
Advanced Design of Work Roll Contours for Different Roll Mill Types
Advancements in the Simulation of Magnetic Pulse Forming Processes with FORGE(R)
Advances and Challenges in Computational Modeling of Impact Welding Process
Advancing the Accuracy of Computational Models for Double-sided Incremental Forming
An Application of Homogeneous Anisotropic Hardening Model to the Prestrained Hole-expansion Experiment
An Extended Ductile Fracture Prediction Model Considering Hydrostatic Stress and Maximum Shear Stress
An Extended GTN Ductile Fracture Model for a Broad Range of Stress States
An Improved Hot Stamping Process for Titanium Alloys by Fast Heating
An Investigation on Formability of Ti6Al4V Alloy in the Three-layer Sheet Hot Stamping Process
Analysis of Creep Behavior of Magnesium Alloy Sheet (AZ31B) in Warm Forming
Analysis of Cross-hardening by High Resolution Orientation Imaging
Analysis of Cylindrically and Spherically Embossed Flux Barriers in Non-oriented Electrical Steel
Analysis of Influencing Factors on the Achievability of Bistable Fully Closed Shells by Semi-analytical Modelling
Analysis of Material Work Hardening and Fracture Strains for Sheet Metal Stamping Processes
Analysis of Orientation Behavior of Plate-like Particles in Differential Speed Powder Rolling
Analysis of the Influence of Joining Partners on the Residual Stress Distribution in Assembled Shafts
Analysis of the Thermomechanical Flow Behavior of Carburized Sheet Metal in Hot Stamping
Analysis of Tube Spinning
Analysis of Work Hardening and Tribological Changes after a Gap Controlled Drawbead Passage
Anisotropic Ductile Fracture Estimation of Diagonal Cracks in Flange-shaped Parts
Anisotropic Plasticity and Ductile Fracture of Titanium Alloy Sheet at Elevated Temperature: Characterization and Modeling
Applicability of ALE Based FEM Methods in the Numerical Modeling of 3D Fine Blanking Processes
Application of the Nondestructive Evaluation (NDE) Method to Evaluate the Sheared Edge Quality and Edge Cracking
Assessment of Calibration Strategies and Model Predictions for Damage in Formed Components
Augmentation of Plasma-based Impulse Generation with Rapid Chemical Reactions
Bulk Microforming From Sheet Metal - A Promising Approach for the Mass Production of Cold Formed Metallic Micro Parts
Calibration and Verification of Stress-strain Curve in High Strain Region of Mild Steel Sheet
Characterisation of Anisotropic Material Behaviour
Co-extrusion of Compound-cast AA7075/6060 Bilayer Billets at Various Temperatures
Combined Computed Tomography and Numerical Modeling for the Analysis of Bending of Additively Manufactured Cellular Sheets
Comparison of Linear Regression and Neural Networks as Surrogates for Sensor Modeling on a Deep Drawn Part
Comparison on the Processing of Height Deviations of Disks from FEM and Real Rollings in Radial-Axial Ring Rolling
Complementary Methods for Assessment of Residual Stress Fields Induced by Rotary Swaging of Steel Bars
Compression of C/Thermoplastic Printed Composite; Shaping Parameters and Material Health
Computational Modeling of Magnetic Pulse Dissimilar Alloys Welding: Aluminum Alloy 6082-T6 and HC420LA Steel
Computer Aided Modeling of the Hot Forming Staking Process Based on Experimental Data
Constitutive Law Parameter Identification for Hot Forging Using Compression Experiments on Forging Presses
Constitutive Model and Plate Forging Ability of 5052 Aluminum Alloy under Different Temperatures
Control Theory for High End Press Brake
Cutting Blades for Food Processing Applications Manufactured Using Innovative Spin Forming
Data Preparation in the Digital Material Representation Based 3D Cellular Automata Model of Static Recrystallization
Decoupling of Adverse Effect of Inter-roll Thrust Force on Steering Control during Strip Rolling
Deformation Analysis in Ultrasonic-assisted Multi-stage Incremental Sheet Forming
Deformation Mechanisms in Tool-workpiece Asperity Contact in Metal Forming
Deforming Behavior in Magnetic Pressure Parallel Seam Welding
Deforming Nanometric Volumes at Large Shear Strains by AFM Scratching
Dependence of Mesoscale Structure of Drawn High Carbon Steel Wire on Wire Diameter
Descriptions of Several Cyclic Plasticity Phenomena Based on Y-U Model: Elastic-plastic Transition, Closure of Stress-strain Loop and Ratcheting
Design of a New Cruciform-like Specimen for Combined Tension and Shear of Metal Sheets
Development and Implementation of Static Recrystallization Model of 6XXX Aluminum Alloy Using Industrial Experiments
Development of a New Printing Method Using Soft Material Tools
Development of Adhesion Preventing Method during Deep-drawing of Titanium Alloy Sheets
Development of Antiloosening Bolts Based on Innovative Double Thread Mechanism
Development of Automatic Design System for Closed Die Forging Process of Disk-shaped Products
Development of Criteria for Strain Induced Oxide Layer Fracture during Cold Rolling of Aluminum
Development of Mechanical Cards for Finite Element Analysis of Mild Steels by Parameter Optimization
Development of Oil-type Lubricants for Cold Forging Using Phase Transition Behavior Under High-pressure Conditions
Development of Warm Press Forming Process Method of Ti-6Al-4V Alloy Sheet
Dynamic Recrystallization Behaviors of 5083 Aluminum Alloys with Different Initial Microstructures under Hot Compression
Effect of Anisotropy Evolution on Several Sheet Metal Forming Processes
Effect of Bending Intensity on Straightness in Spinner Straightener
Effect of Blanking on Magnetic and Mechanical Properties of Non-oriented Electrical Steel
Effect of Delivery Angle on Longitudinal Buckling in Temper Rolling of Thin Steel Strips
Effect of Expansion Ratio on Formability in Tube Drawing with Diameter Expansion
Effect of Machining Induced Microstructure Changes on the Edge Formability of Titanium Alloys at Room Temperature
Effect of Production Rate on Lubrication Performance in Combined Forward-Can and Backward-Can Cold Extrusion Test
Effect of Short Pulsed-current on Stress Relaxation in Uniaxial Tensile Test
Effects of Press Ram Vibrations on the Production Quality
Effects of Servo Press Forming on Various Strain Path Failures
Elastoplastic Finite Element Analysis of Multi-body Processes for Joining Mechanical Parts
Energy-dependent Surface Integrity of Stainless Steel AISI 304 after Robot-based Machine Hammer Peening
Enhancing Tool Life by Manipulating the Punch & Die Elastic Strain Field during Forging
Estimation and Prevention of Strain Localization in Shear Tests
Evaluating the Reliability of a Nondestructive Evaluation (NDE) Tool to Measure the Incoming Sheet Mechanical Properties
Evaluation of isotropic and anisotropic constitutive models on plasticity prediction of AA7075 extruded tube under Tension-Tension and Tension-Compression
Evaluation of Lubricant Performance for Thick Sheet Ironing Process by Ball Ironing Test
Evaluationg of Press Forming Technique for Bent Automotive Body Parts Using In-plane Shear Deformation
Experimental Analysis on Granular Media Based Tube Forming with Active Axial Feed
Experimental and Numerical Investigations into the Influence of the Process Parameters during the Deep Drawing of Fiber Metal Laminates
Experimental and Numerical Investigations on the Development and Stability of Residual Stresses Arising from Hot Forming Processes
Experimental Implementation of SS 316L Cruciform Testing to Achieve Various Deformation Paths
Experimental Investigation of Different WAAM (Wire-Arc Additive Manufacturing) Processes and Their Influence on the Component Properties and Formability
Experimental Study and Modelling of Stress Relaxation Ageing Behaviour and Post-form Mechanical Properties in Creep Age Forming of Al-Zn-Mg Alloy
Experimental Study of Asymmetric Rolling of Aluminum Alloys
Experimental Study on Texture Evolution of Mg-Y Magnesium Alloy in Extrusion
Experimental Study on the In-plane Torsion Test for Sheet Metal
Experimental Study on Uniaxial Strain Cyclic Behavior of GS-20Mn5
Exploring the Fragmentation of Surface Films during Solid State Welding
Extrusion Technology of High-performance Aluminum Alloy Profiles with Large Complex Section
Fabrication of NiAl/TiAl-based Gradient Alloys by Additive Sintering
Fatigue Characteristics and Failure Mechanism of Self-piercing Riveting DP590 and AA6061 Plates
FE-based Investigation on the Influence of Inhomogeneously Heated Billets on Subsequent Forging Processes
FEM Analysis on Multi-pass Wiredrawing Process of Ultra-fine Steel Wire: Investigation on Stress, Strain and Hardness
Fine-piercing of Electrical Steel Sheets by Edge-sharpened Diamond-punch
Finite Element Analysis of Die Quenching 22MnB5 Steel Sheets
Finite Element Simulation and Punch Design for Tube Hydro-piercing
Finite Element Simulation of Edge Fracture by Mapping the Shear-induced Ductile Damage into Hole-expansion Simulation
Flexible Manufacturing of Concave-convex Parts by Incremental Sheet Forming with Active Medium
Flow Behavior and Processing Map of a Nickel-based Superalloy during Hot Plastic Deformation Process
Fluidity of the Wood Composite Combined with Natural Binder on Injection Molding
Formability Analysis of a Local Heat-treated Aluminium Alloy Thin-walled Tube
Formability Improvements at Room Temperature of AA5754-H32 via Continuous Bending under Tension (CBT) and Pre-forming Heat Treatment
Formability of Functional Corrugated Cup
Formation of Residual Stresses in Austenitic Stainless Steels by Infeed and Recess Rotary Swaging
Forming Limit Results Comparing the Bragard Technique with a Statistical, Deformation-history Analysis
Forming of Parts with Locally Defined Mechanical and Ferromagnetic Properties by Flow-forming
Forming of PMMA Sheets by Lap Incremental Forming with Local Friction Heating
Fretting Damage and Fatigue Property Analysis of Self-piercing Riveted Joints of AA5052 Aluminium Alloy
Friction and Thermal Insulation: Influence of Oxide Scale on Hot Forging Sequences
Friction Based Solid State Recycling: An Industry-ready Technology?
Friction Law in Cold Metal Forming
Friction Stir Welding Applied in Joining of Armor Steel
From Bridge to Bumper – Utilization of Pre-stressing during Manufacturing of Hybrid Sheet Metal Structures
Full-field strain measurement in multi-stage shear cutting: High-speed camera setup and variational motion estimation
Fundamentals of Continuous Helicoid Auger Flighting Rolling - Deformation Mechanics, Kinematics and Applications
Galling-free Micro-forging of Titanium Wire with High Reduction in Thickness by Beta-SiC Dies
General Step Reduction and Enlargement Method for Knowledge-based Process Planning of Totally Non-axisymmetric Forged Products with Blanking and Punching
Grain Size Effect on Formability in Electromagnetically-assisted Micro-bulging of Pure Titanium Sheet
Grain Size Effect on the Ductile Fracture of Steel in Hot Deformation
Hardening/Softening Characteristics of a TRIP-assisted Duplex Stainless Steel under Cyclic Deformation
Heterogeneous Deformation in (α+β) Titanium Alloys: Iin-situ Explorations of Strain Localization and Its Governing Deformation Micro-events
High-speed Material Characterization Using an Instrumented Forging Hammer
High-temperature Properties of Hot-work Tool Steel (AISI H13) Deposited via Direct Energy Deposition
Hole Expansion Simulation of Steel Sheet Considering Differential Hardening
Hot Cutting of Press-hardened Parts in Different Heat Treatment Regimes
Hot Deformation Behavior and Constitutive Modeling of a Novel Ni-based Superalloy
Hot Ring Rolling and Cold Expanding Strengthening of Mn18Cr18N Thick-wall Hollow Ingots
Hydro-mechanical Deep Drawing of Locally Solution Treated Aluminum Alloy Sheets
Impact of the Temperature Field of a C38 Steel Slug on its Thixoforging: Experiments and Simulations
In-plane Stretch-bending Test for Determination of Large-strain Workhardening and Fracture of Sheet Metals
In Search of the Perfect Sheet Metal Forming Tribometer
Incremental Collar Forming Process for the Manufacturing of Branched Tubes and Pipes
Influence of Axial Feed-rate on Shape and Thickness Changes during Multi-pass Tube Spinning: Experiments and Modelling
Influence of Forming Conditions on Metal Flow and Lubrication in Cold Backward-cup Extrusion
Influence of Material Delivery Condition on Residual Stresses and Part Properties during Forward Rod Extrusion
Influence of Precoating on the Decarburization of the Surface Layer of Forged Parts during the Hot Die Forging Process
Influence of Shear Cutting Process Parameters on the Residual Stress State and the Fatigue Strength of Gears
Influence of Specimen Preparation Methods on the Mechanical Properties and Superplastic Behavior of AA5083 Sheets
Influence of the Quenching Rate and Natural Ageing Duration on the Formability and Mechanical Properties of EN AW-7075
Influence of Ultrasonic-assistance on the Forming Limits of Steel
Innovations through Collaborative Research
Innovative Simulation Strategy for the Mastering of Tribological Surface Transformations
Introduction of a New Method for Continuous Aluminum Hot Extrusion
Investigating Plastic Anisotropy of Al7079 Using Crystal Plasticity Simulations
Investigation of a Novel Constructive Hot Ring Rolling Process for Double Metal Composite Ring
Investigation of an Integrated Process for Bending and Cross Section Forming of Tubular Lightweight Parts Based on a Working Media Made of Materials with High Plasticity
Investigation of Effects of Part Features in Single Point Incremental Forming of Narrow Channels
Investigation of Failure Mechanisms of Cemented Carbide Fine Blanking Punches by Means of Process Forces and Acoustic Emission
Investigation of Forward–Backward-Radial Extrusion Process of Aluminum Alloy Wheel Hub
Investigation of Machine Learning Models for a Time Series Classification Task in Radial-axial Ring Rolling
Investigation on Springback Behavior of Multi-intersecting High Stiffened Structure in Die Forming
Investigation on the Whole Forming Process of Super-large Flat Ring
Investigations and Improvements in 3D-DIC Optical Residual Stress Analysis – A New Temperature Compensation Method
Investigations on Dynamic Characteristics of a Mechanical Press Considering Both Translational Clearance Joint and Lubrication Effect
Local Microscopic and Integral Macroscopic Analysis of Magnetic Pulse Welds and Deformations for Dissimilar Metal Joints
Localized Contact Pressure of Blankholder for Stamping Irregular Sheet Parts by Configuring the Height of the Supporting Elements
Machine Learning Based Prediction and Compensation of Springback for Tube Bending
Manufacturing of Tailored Blanks with Pre-shaped Involute Gearings by Using a Flexible Rolling Process and Its Application in a Sheet-bulk Metal Forming Process
Manufacturing Processes of Non-metallic Materials
Mathematical Model and Quantitative Analysis of Residual Stress Hole during Laser Shock Peening
Mechanical Properties of Aluminum-stainless Steel Bimetal Composite Fabricated by Extrusion Process
Metal Foils for Bipolar Plates – Correlation of Initial Grain Size and Forming Behavior of 316L
Methods for Increasing the Durability of Forging Tools - Comprehension Review and Outlook
Microstructural Influences on Grain Boundary Sliding in High Purity Aluminum
Microstructure Evolution during Isothermal Forging of 7A85 Aluminum Aviation Component
Microstructure Informed Deformation and Fracture Model for High-strength Steels
Multi-objective Optimization of Elbow-bar Transmission Mechanism Based on Virtual Prototyping
Neural Network Surrogates Model for Metals Undergoing Yield Point Phenomena within Finite Element Analysis
New Generation Press Hardening Steels with Tensile Strength of 1.7-2.0GPa and Enhanced Bendability
New Methods for Fracture Detection of Automotive Steels
Non-isothermal modeling of static recrystallization in hydroformed steel tube using a coupled Cellular Automata and Finite Element model
Nonlinearity of the Crystal Yield Function in the Rate-independent Crystal Plasticity and Its Effect on the Evolution of Anisotropy
Novel Roll Bonded Stainless Steel / Boron-steel Multilayer under Hot Stamping Conditions
Numerical and Experimental Investigations on Riveting Assembly Processing Parameters of Hub Bearing Unit
Numerical Modeling of Ductile Damage during Metal Forming: State of the Art and Future Challenges
Numerical Modelling and Deformation Mechanics of the English Wheel Process
Numerical Modelling of the Flow Forming Process: Computation Time Optimization and Accuracy Analysis
Numerical Simulation of Pipe Bending Supported by Hydraulic Pressure for Manufacturing Butt-welding Fittings
On Edge Crack Initiation of an Aluminum Sheet Metal
On Sampling Discrete Orientations for Texture Representation in Aggregates with Varying Grain Size
On the Characterization of Fracture Loci in Thin-walled Tube Forming
On the Convexity Bound of the Generalized Drucker's Yield Function CB2001 for Orthotropic Sheets
On the Determination of the Forming Limits by Necking and Fracture of Polycarbonate Sheet
On the Geometrical Accuracy in Incremental Sheet Forming
On the Newly Proposed Shear Constraint for Orthotropic Plasticity Modeling of Sheet Metals
On the Potential of Machine Learning Algorithms to Predict the Plasticity of Sheet Metal
Open-die Forging of Copper Cone
Optimization of Lattice Structures for Additively Manufactured Interpenetrating Composites
Optimization of Open-die Forging Using Fast Models for Strain, Temperature and Grain Size in the Context of an Assistance System
Oscillation-free Determination of Material Properties at High Strain Rate
Penetrating Tool Friction Stir Incremental Forming Using Alternating Tool Path Direction
Phase-field Modelling of Ductile Fracture to Describe Edge Conditions in Local Formability Studies
PID Controller Integrated with FEM Model to Generate Boundary Conditions for Free Tube Bulging for Tubular Material Characterization
Plastic and Fracture Characteristics of WE43 Mg Alloy Under Complex Stress States
Plasticity and Ductile Fracture of Ultra-high Strength Steel Sheets under Complex Stress State: Experiments and Modeling
Possibility of Shear Forging as the Third Basic Process of Cold Forging
Pre-forging Shape Design Using Conformal Mapping Method
Prediction on Microstructure of Large Scale Hot Forged Ni-based Super Alloy
Predictive Model for the Strength of Self-piercing Riveted Joints
Professor Ruan-An Extaodinary Pioneer within the Global Scientific Network Metal Forming
Professor Ruan and the International Cold Forging Group (ICFG)
Professor Z.R. Wang's Contributions to Metal Forming Theory, Technology and Education
Prof. Xue-Yu Ruan and His Academic Life
Prof. Yasuhisa Tozawa's Achievements in the Field of Metal Forming
Pushing Forward the Limit of Transformation-induced Plasticity (TRIP) Effect: Nnew Strategies in Mechanically Metastable Alloy Design
Recent Advances in Sheet and Tube Hydroforming
Recent Advances on Modeling Plastic Deformation of Textured Metals with Applications to Metal Forming
Recent Developments of Vaporizing Foil Actuator Technique for Manufacturing Applications
Recent Investigations on Incremental Sheet Forming: From Fundamentals to Industrial Application Technologies
Reducing Aluminum Extrusion Transverse Weld Process Scrap
Relating Microstructure to Deformation in Al Alloys via Multiscale Electron Microscopy
Relaxation Characteristics of Creasing Process of Scored Paperboard for Liquid Container
Research of Press Forming of CFRTP under the Control of a Distribution of Temperature and Blank Holder Force
Research Progress on Advanced Forming and Performance Strengthening of Complex Thin-walled Aluminum Alloy Components
Residual Stresses in Hot Bulk Formed Parts – A Phenomenological Approach for the Austenite-to-Martensite Phase Transformation
Rim Thickening of Disk-like Parts Using Spinning
Robotic Roller Forming Process and Strategies to Eliminate Geometrical Defect of Edge Waves
Roll Forming of Cup with Curved Rotary Profile
Self-optimized, Intelligent Open Loop Controlled Steel Strip Straightening Machine for Advanced Formability
Self-piercing Riveting Using Rivets Made of Stainless Steel with High Strain Hardening
Shaping of Sharp-edged Design Elements by Electromagnetic Forming
Simulated Microstructure Effects on Macroscopic Mechanical Properties Based on Multiscale Crystal Plasticity
Simulation of Cold Forging Processes Using a Mixed Isotropic-Kinematik Hardening Model
Simulations of Grain Growth with Arbitrary Grain Boundary Energy
Size Effect on Cyclic Deformation Behavior and Springback Prediction of Ultrathin Superalloy Sheet
Spot Butt Friction Stir Welding of Thin Stainless Steel Sheets
Statistical Analysis of Microscopic Strain Localization and Its Strain Level Dependence
Strain-rate-sensitivity Calibration of Aluminum Alloy Sheet by Electromagnetic Flanging of Circular Hole
Strain Hardening of AA5182-O Considering Strain Rate and Temperature Effect
Strength Prediction Model for Line Pipe Steels Subject to Multiple Deformation Paths
Stress-based Ductile Fracture Criterion for Nonlinear Strain Paths with Model Calibration
Stress-relaxation Age Forming of A Component with Complex and Large Curvatures: Simulation and Manufacturing
Study of Hydrogen Embrittlement Behavior of Hot-stamped Ultra-high Strength Steel
Study of the Influence of the Mixed-grain Structure on the Microscopic Deformation Behavior of 316LN Steel
Study on Complex Extrusion of Multi Billets: Evaluation of Mechanical Properties of Butt-joined Products and Analysis of Joining State
Study on the Effect of Embossing on the Bending Properties of High Strength Sheet Metals
Study on the Transferability of Rolling with Ordered Texturing Roll
Surface Quality of Extruded Sidewall in Cold Backward Cup Extrusion with Low-frequency Torsional Oscillation
Surrogate Modelling of Search Range in Polyhedron Flow Stress Model Identification with Inverse Analysis and Cylindrical Compression Test
T8 Heat Treatment Effect on Wear Behavior and Microstructure of Cryo and RT Ecaped Al 6063
Temperature and Deformation Modeling for the Friction Stir Welding Process in AZ31 Magnesium Alloy
Temperature Dependent Fracture Loci Of AZ31 Magnesium Alloy Sheets
Testing Method of Anti-galling Ability of Lubrication Coatings in Multi-stage Cold Forging
The Dieless Drawing Process for the Elongation of Ultrafine Copper and Brass Wire
The Effect of Crystallographic Texture Gradients on the Mechanical Response of Aluminum Automotive Extrusions
The Effect of Interface Cohesion on Layer Stability during Accumulative Roll Bonding of Cu/Ta Multilayers
The Effect of Temperature on Strain-induced Austenite to Martensite Phase Transformation in SS 316L during Uniaxial Tension
The Effect of Ultrasonic Vibration on Material Movement in Incremental Sheet Forming
The Effects of the Shearing Speed on the Sheared Edge Quality and Edge Cracking
The Evolution of Deformation Microstructures and Strain Hardening during Constrained Sliding with Implications for Metal Forming and Cutting Processes
The Fundamentals of Microparticle Impact Bonding in Metals, Alloys, and Advanced Materials
The Influence of Temperature and Strain Rate on the Superplastic Deformation Behavior and Microstructure Evolution of TNW700 Alloy
The Local Strain Evolution for Structured Sheet Metals during Uniaxial Deformation
The Process Design to Control the Yield Ratio of Yield-Ratio-Control-Steel on Both Wire Production and Forging Process
The Study of Energy Absorption of Dual-material Tailored Plane Strain Sheet
Thermomechanical Analysis and Experimental Validation of ECAP for Aluminum Sheet Metal
Three-dimensional Analysis of Strip Rolling by Coupling Elastic Deformation of Rolls and Rolling Mills
Towards an Efficient Industrial Implementation of W-temper Forming for 7xxx Series Al Alloys
Towards Room-temperature Forming of Magnesium Sheet Alloys
Transcription of Mirror-finished Surface onto A5083 Aluminum Alloy Plate by Friction Stir Forming
Tribological Conditions in Hot Bending of 22MnB5 Tubes
Tube Forming and Fabricating Technologies for Contributing Society by Tackling Problems of Environment and Aging Population
Tube Roll Forming Flower Design and Flexible Roll Adjustment with CAE Simulation
Ultrasonic Forming - Alternative to Orbital Riveting for Small Bimetallic Components
Understanding the Microscale Plastic Behavior and Deformation Mechanism of Magnesium Alloy via Ex-situ Experiments and Full-field Crystal Plasticity Modeling
Using Local Heat Treatment for Producing Uniform Profile Hollow Components by Radial Rotation Profile-forming
Using Plasticity for Making High-performance Nanostructured Composites
Vacuum Hot-roll Bonding of Titanium and Carbon Steel Using Pure Iron Interlayer
Validation of Automatically Generated Forging Sequences Using FE Simulations
Vision 2030: A Vision for America’s Science and Engineering Enterprise & Relevance to Advanced Manufacturing
Welding of Aluminum in Chip Extrusion
Work Hardening and Fracture Strain Measurement of Hardened SKD11 Steel Using Shear Punching Test
"Learning by Seeing": Estimating Metal Plasticity Parameters Using In Situ Observations of Cutting and Indentation
Questions about ProgramMaster? Contact programming@programmaster.org | TMS Privacy Policy | Accessibility Statement