ProgramMaster Logo
Conference Tools for 2022 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2022 TMS Annual Meeting & Exhibition
Symposium Cast Shop Technology
Presentation Title Short- and Long-term Aluminum Filtration Trials with Carbon-bonded Alumina Filters
Author(s) Claudia Voigt, Jana Hubálková, Are Bergin, Robert Fritzsch, Shahid Akhtar, Ragnhild Aune, Christos G. Aneziris
On-Site Speaker (Planned) Claudia Voigt
Abstract Scope In the present study carbon-bonded alumina filters, normally used for the filtration of steel melts, have been investigated as a potential filter material for filtration of aluminum. Short- and long-term pilot scale filtration trials were conducted, and the filter behavior during filtration of aluminum alloy was determined by the use of PoDFA (Porous Disk Filtration Apparatus) for the short-term trials (with the casting alloy AlSi7Mg) and LiMCA (Liquid Metal Cleanliness Analyzer) for the long-term trials with wrought alloy 6xxx aluminum. All applied filters were also investigated post-mortem by SEM (Scanning Electron Microscopy) analysis. Furthermore, sessile drop experiments with capillary purification were performed to evaluate the wetting behavior as well as any reactions occurring between the filter material and the aluminum alloy being filtered.
Proceedings Inclusion? Planned: Light Metals
Keywords Ceramics, Aluminum,

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

Adaptive Tempering in High Pressure Die Casting through Prediction Functions
Aluminium Melting Process Pptimization with SmartMelt, a Digital Tool for Real-time Operational Guidance
Aluminothermic Reduction of Sulfides via Reactive Vacuum Distillation
Aluminum Melt Cleanliness Analysis Based on Direct Comparison of Computationally Segmented PoDFA Samples and LiMCA Results
Analytical, Numerical and Experimental Investigations of Transient Heat Conduction in Launder during Casting Process
Casthouse Furnace Tending: A New Approach Thanks to Custom Robotics
Chlorine Free Degas System for Aluminum Slab Casting and Its Effect on Sheet Products
Continuous Chemical Analysis of Molten Aluminum
Control Pin Refractory Reaction in High Magnesium Aluminium-melts
Dew Point Monitoring and Alarm System for Meltable Storage
Digital Twin for Design and Optimization of DC Casting Lines
Effect of Flow Management on Ultrasonic Melt Processing in a Launder upon DC Casting
Energy Resilient Foundries: The "Small is beautiful" Projects
Evaluation of Breathability of Molten Metal PPE Fabrics
Heat Treatment of Mg-containing Aluminum Alloys 5182 and 6016 in an Oxidizing Atmosphere with 4 % CO2
Microalloying to Inhibit Oxidation of Al-Mg Alloys
Microstructural Modification of a High-pressure Die-cast A380 Alloy through Friction Stir Processing and Its Effect on Mechanical Properties
NOW ON-DEMAND ONLY - Effect of Heat Treatment on Mechanical Properties of Er, Dy and Eu Modified A356 Alloy
NOW ON-DEMAND ONLY - Effects of Casting Temperature and Iron Content on the Microstructure of Hypoeutectic A380 Aluminum Alloy
NOW ON-DEMAND ONLY - The Effect of the Holding Time on the Microstructure of Gd-containing AlSi7Mg Alloys
Numerical and Experimental Investigation of Heat Transfer in the Solidification-deformation Zone during Twin-roll Casting of Aluminum Strips
Performance of Regular and Modified Ceramic Foam Filters (CFFs) during Aluminium Melt Filtration in a Pilot Scale Setup
Predicted Back-meniscus Stability for the Horizontal Single Belt Casting (HSBC) with Single Impingement Feeding System
Quality Defects Metallurgical Root Cause Analysis for Aluminium Thin Foil Production
Quantitative Assessment of Operational Parameters on Die Temperature during an Industrial Low-pressure Die Casting Process
Short- and Long-term Aluminum Filtration Trials with Carbon-bonded Alumina Filters
The Great Debate - High vs Low Water Direct Chill Casting Pits - Which is Safer
The Local Squeeze Technology for Challenging Aluminium HPDC Automotive Components
The Origins of Wagstaff Inc. Part 1- Two Emerging Technologies Collide
The Origins of Wagstaff Inc. Part 2- Aggressive R&D

Questions about ProgramMaster? Contact programming@programmaster.org