ProgramMaster Logo
Conference Tools for MS&T23: Materials Science & Technology
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting MS&T23: Materials Science & Technology
Symposium Light Metal Technology
Presentation Title Solidification Evolution, Microstructure and Tensile Properties of Al-Mg-Sc Alloys
Author(s) Jose Spinelli, Anderson Nunes, Guilherme Gouveia, Leonardo Gomes
On-Site Speaker (Planned) Jose Spinelli
Abstract Scope In technical applications that call for a mix of low density and mechanical strength, such as in aeronautical and aerospace sector equipment, aluminum alloys are extremely attractive. Thus, from an economic and environmental perspectives, the search for alloys with higher specific strengths is worthwhile. The goal of this research is to examine the effects of cooling rates on the phase morphology and tensile properties of ternary Al-Mg-Sc alloys (Scalmalloy). The method used to solidify the ternary Al-5, and -10wt% Mg-0.1wt% Sc alloys was the transient upward solidification. This process resulted in a wide range of cooling rates, which led to the development of a microstructural variation along the longitudinal cooling direction and, as a result, an expressive variation of tensile properties. The understanding of cell and dendrite growth was based on the solidification rates. Improvements in tensile properties can be associated with either Mg solution or dendritic/cellular spacing size.

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

A Case of Update on 330kA Aluminium Potline in China
A Machine-learning Assisted Optimization Approach and Microstructure Characterization Method for Laser Powder Bed Fusion
Assesment of the Mechanical Properties of an AlMg7Cu2 Alloy with TiBZrMoV Alloying at Different T6 Solution Heat Treatment Conditons and Modeling of Its Behavior by Continuum Mechanics Approach
Characterisation of A201 Alloy Produced by Low Pressure Die Casting into Resin Sand Moulds
Development of Al-Ce-(Fe)-(Mg) Alloys for Elevated Temperature and High Strength Applications
Effect of Erbium and Europium Addition on Microstructure and Mechanical Properties of A356, A206 and A201 Alloys
Effect of Melt Thermal-rate Treatment on Microstructure and Mechanical Properties in Al-Zn-Mg-Cu Alloy Billets Fabricated by Direct-chill Casting
Effect of Zr-Er-Y L12 Phase on Precipitation Behavior of Al-Zn-Mg Alloy
Effects of Pass Strains of Multi-directional Forging and Additive Cold Rolling of Pure Ti on the Microstructural Evolution and Mechanical Properties
Elastic-plastic Approach on Transformation of LPSO Phases in a Mg-RE Alloy by Nanoindentation
Evolution of Spheroidal α-AlFeSi Phase in 1200 Aluminum by 3D Visualization Using FIB-SEM
H-1: Numerical Simulation of Effect of Process Parameters on Solidification Structure in Titanium Alloy TC4 Vacuum Arc Remelting Process
Importance of Runner Design in the Reproducibility of Tensile Tests
Improved Strength in Mg-Al Dissimilar Impact Welding by Surface Nanocrystallization of Mg Alloy Sheet
Inductance-based Structural Self-sensing, as Shown for Sensing Shape-changing Deformation In Aluminum
Influence of Ce, Ni and Cu on Castability and Mechanical Properties of Al Piston Alloys
Investigating Hydrogen Porosity in Aluminum Laser Welding Using a Three-dimensional Cellular Automaton Model
Investigation on the Grain Refinement of Mg-Al Alloys by Superheating Process Using Rapid Solidification Process
Mechanical Property Comparison of Al11Si Wheels Grain Refined by Ti, Nb and Nucleant 1582
Mechanical Property of Nb Grain Refined AlSi11 Alloy
Observation of Impact Deformation and Fracture on Severe Plastic Deformed Ti by Using Synchrotron Radiation
Optimization of Die Casting Process with Various Oxygen Concentration
Phase Stability in Laser Melted Microstructures of Al-X (X=Zr, Nb, V) Alloys
Physics-constrained, Inverse Design of High-temperature, High-strength, Creep-resistant Printable Al Alloys Using Machine Learning Methods
Precipitate-strengthened Micromechanical Behaviors of Magnesium Alloy Under Cyclic Loading
Production of Titanium Wire from Scrap Material Using Continuous Extrusion Machine
Role of Alloying Elements and Solidification Conditions on the Evolution of Fe-rich Intermetallic Phases in Recycled Al-Si Alloys with Higher Fe
Role of Guinier-Preston Zones in Achieving High Strength-ductility in a New Mg-Zn-Al-Ca-Mn-Ce Sheet Alloy
Role of Interfaces on the Orientation Dependent Spheroidization Response of -colonies in Ti-6Al-4V Alloy
Selective Laser Melting of a TiB2/Al-Cu-Mg-Ni-Sc Composite
Solidification Evolution, Microstructure and Tensile Properties of Al-Mg-Sc Alloys
Study on the Improvement of the Mechanical Properties Heavy Commercial Vehicle’s Wheel by the Molten-forged on the A356 Alloy
The Beneficial Effects of Ce Additions on High-Fe Secondary Al-Si Casting Alloys
The Myth on the Pore Formation in Aluminum Casting on the Alloying with Rare Earth Elements
Through-thickness Heterogeneity in the Mechanical Properties of Hot Rolled AA7075-T651

Questions about ProgramMaster? Contact programming@programmaster.org