ProgramMaster Logo
Conference Tools for 2020 TMS Annual Meeting & Exhibition
Register as a New User
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Symposium
Meeting 2020 TMS Annual Meeting & Exhibition
Symposium Recycling of Secondary, Byproduct Materials and Energy
Sponsorship TMS Extraction and Processing Division
TMS: Recycling and Environmental Technologies Committee
Organizer(s) Mingming Zhang, ArcelorMittal Global R&D
John A. Howarter, Purdue University
Elsa Olivetti, Massachusetts Institute of Technology
Alan A. Luo, Ohio State University
Adam C. Powell, Worcester Polytechnic Institute
Ziqi Sun, Queensland University of Technology
Scope There has been a significant mismatch between the technical needs for responsible treatment of secondary, byproduct materials and embodied energy of materials and the ability to achieve economically feasible and sustainable operations. These materials and their embodied energy are generally low value and can be quite complex due to the significant variation in properties leading to potential mismatch among complexity, regulations and available resources. This symposium will provide a forum for papers exploring the valorization of materials and their embodied energy including byproducts or coproducts from ferrous and nonferrous industries, batteries, electronics, and other complex secondary materials. Those papers providing perspective on both the technical as well as policy-based challenges are encouraged to submit.
Abstracts Due 07/15/2019
Proceedings Plan Planned:

A literature review of comprehensive utilization of vanadium extraction tailings
A Novel Method for Extracting Cobalt, Lithium, Nickel and Manganese from Recycled Lithium-ion Batteries using Electrochemistry
A Potential Hydrometallurgical Treatment for Valuable Metal Recovery from E-waste: Bromine Leaching
A Recycling System for Sustainable Management of Waste Photovoltaic Panels in Taiwan
A Review of Iron and Steel Scrap Recycling in Ironmaking and Steelmaking Processes
Achieving an internal recirculation of slag towards a zero waste stainless-steel production
Additive manufacturing kaolinite-based clay with electric arc furnace steel dust
An Environmental Impact and Economic Evaluation of using Alternative Feedstock Powders in Metal Additive Manufacturing
Assessing the techno-economic feasibility of solvent-based, critical material recovery from uncertain, end-of-life battery feedstock
Battery waste valorization in particle reinforce-polymeric resin composites tailored for electronic Applications
Carbon black from waste tires: purification strategies and recycle potential
Characterization of wasted LEDs from tubular lamps focused on recycling process by hydrometallurgy
Controllable synthesis of battery-grade iron oxalate with waste ferrous sulfate from titanium dioxide production
Copper Recovery from Flue Dust Generated in E-Waste Processing by Chemical and Electrical Methods
Crystallization and Carbonization of TiO2-CaO-SiO2 Ternary Slag
Density separation of zinc process tailings for the concentration of hematite.
Development of a carbo-granulation process for the manufacture of artificial aggregates using mining residues and carbon dioxide
Efficient recovery processes for the black mass from spent lithium-ion batteries
Electrolysis Recovery Copper from Waste Printed Circuit Boards
End-of-Life Lithium-Ion Battery Component Mechanical Liberation and Separation
Engineered Carbon Products from Sustainable Lignin Feedstocks for Energy Applications
Experimental study on stainless steel dust by reduction and enrichment for preparation raw material of powder metallurgy
Extraction and Processing of Crystalline Metallurgical-Grade Silicon prepared from Rice Husk Byproduct
Granulation and Carbonization Process of Titanium-bearing Blast furnace slag
Hydrothermal Regeneration of Cycled LiFePO4 Cathode Material from Spent Lithium Ion Batteries
Life Cycle Assessment of solid waste incineration in a rotary kiln: A simulation based approach
Low Cost Metal Recovery from E-Waste
Metal extraction from municipal solid waste incineration fly ash and immobilization of toxic metals in residue
Modeling the Development of a combined pyro-hydrometallurgical and Nano-technological route to treat a waste copper smelter dust.
Preparation of calcium ferrite using flue gas desulfurization gypsum and iron oxide
Recovering Plastics from Electronics Waste
Recovery Nickel-ferous Compound from Nickel-bearing Secondary Resources
Recycling corrugated cardboard
Recycling of BF dust with In-flight Reduction Technology: Reduction Behavior and Kinetic Analysis
Recycling of Crystalline Silicon Solar (PV) Panels: Technological Challenges, Economical Feasibility and Environmental Impact
Recycling of Metallurgical Slag for Electromagnetic Waves Interference Functions
Recycling of Used Quartz Crucible and Parts using Acid Leaching and Hot Chlorination Process
Recycling of waste neodymium magnet trough electrorefining of molten salt
Recycling Research in the Kroll Institute for Extractive Metallurgy
Recycling Technologies of Zn-C batteries: Review and Challenges to a Circular Economy
Residual quarry sludge stabilization to prefabricate sustainable building elements.
Selective recovery of lithium from spent ternary lithium-ion batteries using sulfate roasting-water leaching process
Selective separation and recovery of copper, cobalt and iron from Cu, Co-bearing pyrite cinder via the acid leaching process
Separation and Recovery of Zinc and Cobalt from Zinc Plant Residue by Alkali Leaching
Study on Cracking Control of Cold Bonded Pellets Containing Converter Dust Based on nonhydraulic Hardening Mechanism
Study on Mineral Phase Pomposition and Viscosity of Hot Metal Pretreatment Desulfurization Slag Based on Factsage
Study on Oxidation Roasting Process of Cathode Sheets from Spent Lithium Ion Batteries
The SPl-cycle project;SPL–CYCLE. Closing the loop of the Spent Pot–line (SPL) in Al smelting process
Thermal disengagement technology: the perspective of microrecycling of polymer-metal multilayer packaging materials
Thermal route of synthesis of different metal oxide nanoparticles from spent Zn-C battery and its application as a catalysts in internet of things
Thermodynamic Analysis and Reduction of Anosovite with Methane at Low Temperature
Thermodynamic Modeling and Experimental Validation of Iron-Containing Intermetallic Phase Formation in Recycled Cast Aluminum Alloys
To recycle or not to recycle – critical row materials in extreme conditions – European Union perspective and challenges
Towards 100% Recycling of Steelmaking Offgas Solid Wastes by Reallocating Zinc-bearing Materials
Utilization of bauxite residue in the non-ferrous metallurgical processes.
Utilization of smelting byproduct as glass and ceramic materials

Questions about ProgramMaster? Contact