ProgramMaster Logo
Conference Tools for 2020 TMS Annual Meeting & Exhibition
Register as a New User
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Symposium
Meeting 2020 TMS Annual Meeting & Exhibition
Symposium Aluminum Alloys, Processing and Characterization
Sponsorship TMS Light Metals Division
TMS: Aluminum Committee
Organizer(s) Dmitry G. Eskin, Brunel University
Scope This Aluminum Alloys, Processing and Characterization Symposium, along with Cast Shop Technology, Aluminum Reduction Technology, Electrode Technology for Aluminum Production, and Alumina and Bauxite form the Light Metals Symposium. This is an excellent opportunity to interact with experts from the Light Metals industry and academia from all over the world and get the latest update on key issues in the industry. The symposium covers all aspects of the physical and mechanical metallurgy of aluminum alloys as well as processing methods (continuous casting is covered by Cast Shop Technology), product development, testing, and implementation of aluminum for end applications, including transportation (automotive, aerospace, and marine), packaging, and other key product segments. You are invited to submit papers of fundamental and applied research in the following subject areas:

- Alloy Development, including Al-Sc alloys
- Microstructure Evolution and Characterization
- Defect Detection and Control
- Surface Modification and Control
- Mechanical Behavior
- Material and Process Modeling
- Processing Innovation
- Process Control and Measurements
- New Applications and Products

Note regarding publication: Authors seeking an oral presentation opportunity must submit a manuscript for the proceedings or be approved for publication in a TMS journal. Authors seeking a poster presentation are not eligible to publish in the conference proceedings.
Abstracts Due 07/15/2019
Proceedings Plan Planned: Light Metals

A Heat-Resisting Aluminum Alloy Wire
A Statistical Analysis to Study the Effect of Silicon Content, Surface Roughness, Droplet Size and Elapsed Time on Wetting Angle and Corrosion Resistance of Hypereutectic Cast Aluminum-Silicon Alloys
Alloy Design Principles for Ternary Additions to Al-Ce-based Alloys
Aluminium alloy for high pressure die casting for use without heat treatment
Aluminum Nanocomposites Made via In Situ Metal-based Pyrolysis: Processing and Microstructure
Aluminum trace elements analyses using Epsilon 1 Meso EDXRF technique
Analysis of microhardness of Al-Si alloys directionally solidified
Characterization and Performance of Al-Si-Sn-Cu/Ti-6Al-4V Composite Coatings for Extended Application.
Characterization of dynamic material property of AlSi10Mg aluminum alloy under high strain rate compressive loading
Coarsening-resistance of an Al-0.2wt%Sc alloy
Corrosion inhibition effect of Aloe Saponaria gel on the corrosion process of aluminum
Current efficiency for direct production of an aluminium- titanium alloy by electrolysis in a laboratory cell
Descriptors and Predictors: New Tools for the Predictive Modelling of Production Paths and the Properties of Aluminum-Based End-Products
Development and Analysis of Al7075 Alloy Materials using Press and Sinter Processing
Development of friction based strategies for the surface modification of aluminium alloys
Development of High-Entropy Aluminum Alloys (HEA-Al)
Development of two cavities' large wheel forming process using semi-solid forging technology
Effect of Heat-treating Conditions on the Microstructural Evolution and Mechanical Properties of Al-Zn-Mg-Cu Alloys
Effect of Heat Treatment on Bending Performance of Extruded 6082 Aluminum Alloy T Profiles
Effect of Heat Treatment on the Failure Response of an AA6xxx Aluminum Alloy for Crash Applications
Effect of Homogenization Temperature on Microstructure and Mechanical Properties of Al-Mg-Si Alloy Containing Low-melting Point Elements
Effect of Mg on flow behavior of Al-Mg alloys and its constitutive modelling using finite element analysis
Effect of Mo on elevated-temperature low-cycle fatigue behavior of Al-Si 356 cast alloy
Effect of nano α-Al(Fe,Mn)Si particles on the microstructure and mechanical properties of extruded Al-Si-Mg-based alloy with ZnO addition
Effect of quenching on microstructure and properties of an Al-Si-Mg-Cu alloy
Effect of Si modification on the mechanical and tribological properties of an Al-Si hyper-eutectic alloy
Effect of transition metals micro-additions on microstructure and mechanical properties Al-Si-Mg alloys with various silicon concentration
Effect of V, Zr micro-alloying elements on the room and high temperature mechanical properties of AlSi7MgCu0.5 alloys
Effect of Zn additions on the Mechanical properties of High Strength Al-Si-Mg-Cu alloys
Effect of Zr, V and Mo additions on mechanical properties and microstructure of AlSi8Mg cast alloy
Effects of Advanced Surface Treatments on Microstructure, Fatigue and Corrosion Properties of Aluminum Alloy 7075-T6
Effects of Cu contents on electric and mechanical properties of Al-Zn-Mg based alloys
Effects of Different Extrusion Parameters on Microstructural and Mechanical Properties of EN AW 6063
Effects of Filtration Paper and Bleaching Earth on Rolling Mill Oil Performance
Effects of grain refinement induced by nanoparticles on mechanical properties and formability
Effects of Ni and Si Content on the Conductivity, Microhardness and Microstructure of Al-0.8Fe-0.5Mg Alloys
Effects of Sc and Y on the as-cast microstructure of AA6086
Effects of trace elements on thermal conductivity and formability of the extruded Al-RE alloy systems
Evolution of dispersoids and dispersoid-free zones in DC cast 6082 alloy with various Mn levels
Evolution of grain refinement in AA5083 sheet metal processed by ECAP
Evolution of microstructure and elevated temperature properties in Al-7Si-3.5Cu-0.7Fe cast alloy with Mn and Mo additions
Experimental investigation of MgAl2O4 spinel formation in oxidation of Al-Mg alloys
Galvanic Corrosion Resistance of Mixed-Material Joints Fabricated by Resistance Spot Riveting™
Grain Boundary Precipitation in Al-Mg-Si alloys
Heat treatment Effect and Mechanical Properties of Modified A7075 Alloy for Improved Extrudability
Hemming evolution of 6xxx aluminum alloys in the course of natural aging following the continuous annealing
High cycle fatigue performance of Zr-modified Al-Si-Cu-Mg alloy at elevated temperatures
Hot deformation and die-quenching of 6000-series alloys - the effect of quench-interruption temperature
Hybrid Aluminum Sheets with Improved Mechanical Properties by Repeated Roll-Bonding Process
In-Situ Neutron Diffraction Solidification Analyses of Rare Earth Reinforced Hypoeutectic and Hypereutectic Aluminum-Silicon Alloys
Influence of chemical composition and pre-deformation on the age-hardening response of Al-Mg-Si alloys
Influence of Microstructures and Microhardness on Baking Parameters of an AA6016 Alloy Sheet
Influence of the content of alumina nanoparticles on the structure and mechanical properties of aluminum
Influence of TiB2 particles on modification of eutectic phase in Al-Zn-Si-Mg-Cu cast alloys.
Investigating the Electrochemical Behaviour and Microstructural Growth of Al-Cu-Fe Quasicrystalline Coatings
Investigation of Temperature Variation during Friction Drilling of 6082 and 7075 Al-alloys
Laser joining of aluminium and steel thin sheets
Mechanical and micro-structural behavior of dissimilar AA2014-T6 and AA7075-T6 aluminium alloys joined by Friction Stir Welding
Mechanical properties of AA2024 matrix composites reinforced with micro yttrium through powder metallurgy
Microstructure analysis of graded interface layers in a model multilayer Al/Al-Zn/Al by scanning microbeam small-angle X-ray scattering measurements
Modelling of intragranular and intergranular failure in rolled aluminum alloys
Molecular Dynamics Simulations of the Solidification of Pure Aluminium
Nanotechnology enabled arc welding of high strength aluminum alloys
Nanotreating High-zinc Al-Zn-Mg-Cu Alloy by TiC Nanoparticles
New welded corrosion resistance aluminum alloy R-1407
Nonoindentation and sonofragmentation studies of primary Al3Zr intermetallics formed in Al alloys
Optimization of Thermo-Mechanical Processes for Continuous Casting Products Using High Aluminum - Magnesium Alloys in Automotive Industry Applications
Plastic flow of AA6013-T6 at elevated temperatures and subsequent reaging to regain full strength
Rare earth intermetallics formation in Al-Cu and Al-Si-Cu cast alloys
Retrogression forming and reaging of AA7075-T6 Alclad to produce stampings with peak strength
Self-healing Aluminium Alloys
Simulation Study on Equal Channel Right Angular Extrusion Process of Aluminum Alloy 6061
Spark Plasma Sintering of Graphene Nanoplatelets Reinforced Aluminium 6061 Alloy Composites
State parameter-based simulation of temperature- and strain rate dependent flow curves of Al-alloys
Stress Characterization of Bore-Chilled Sand Cast Aluminum Engine Blocks in As-Cast and T7 Condition with application of Neutron Diffraction
Study of creep in Al-Mg alloy、Al-Cu-Mg alloy and pure aluminum
Study of design and thermal treatment of automotive control arm fabricated from A357 semi-solid alloy
Study on the anti-EMF of Aluminum Erbium Intermediate Alloy Prepared by Er2O3 as Erbium Source
Synergistic effects of Cu and Zr、V on microstructure and mechanical properties of Al-Si-Mg cast alloy
Temperature effect on the high-cycle fatigue behaviour of primary AlSi7MgCu0.5 alloys
The Effect of Grain Morphology on the IGC Susceptibility of AlMgSiCu Alloys for Automotive Applications
The effect of initial precipitates on shear deformation in 6061 aluminium alloy
The effect of profile shape on crystallographic texture of extruded 6xxx high strength aluminium alloy
The effect of SIMA process on the microstructure and mechanical properties of Al-7Si alloy
The effect of zinc addition on corrosion resistance and mechanical properties of recycled aluminium cans
The effects of Mg and Si content on microstructure and mechanical response of artificially aged Al-Mg-Si alloys: experiments and modeling.
The Efficacy of Replacing Elemental Cerium in Aluminum-Cerium Alloys with LREE Mischmetal
The Evaluaion of Forged Aluminum Heat Sink for LED Headlight of Automobile
The formation of Fe-rich phases in Al-Mg die cast alloy and its strengthening effect
The Influence of Mg and Mn Content on Grain Growth in AA5182 Type Alloys
The role of in-situ stacking faults and twins in the deformation behavior of new Al alloys
Thermodynamic and Kinetic Study of Supersaturation in Peritectic-Forming Elements in Aluminum Alloy During Solidification
Understanding the impact of Mn and Mo micro-addition on Al-Zr-Sc-Er-Si mechanical properties: Individual and synergistic effects
Utilization of 3D Printed Materials in Expendable Pattern Casting Process

Questions about ProgramMaster? Contact