ProgramMaster Logo
Conference Tools for 2020 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2020 TMS Annual Meeting & Exhibition
Symposium Aluminum Alloys, Processing and Characterization
Presentation Title Influence of TiB<SUb>2 Particles on Modification of Mg<SUb>2Si Eutectic Phase in Al-Zn-Si-Mg-Cu Cast Alloys
Author(s) Byung-Joo Kim, Sung Su Jung, Yong Ho Park, Young Cheol Lee
On-Site Speaker (Planned) Byung-Joo Kim
Abstract Scope In this study, the effect of TiB<SUb>2 particles on the modification of eutectic phase in Al-Zn-Si-Mg-Cu system alloys is investigated. The microstructure showed that an excellent effect can be achieved after the addition of TiB<SUb>2 particles. The morphology of eutectic Mg<SUb>2Si changed from large Chinses script to fine polygonal shape with a significant reduction in size. Modified eutectic Mg<SUb>2Si particles were investigated using an optical microscope and field emission scanning/transmission electron microscope, and it was confirmed that TiB<SUb>2 particles acted as nucleation sites for the eutectic Mg<SUb>2Si phase. Upon these results, a possible mechanism of eutectic Mg<SUb>2Si phase modification by the addition of TiB<SUb>2 particles is proposed.
Proceedings Inclusion? Planned: Light Metals

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

A Statistical Analysis to Study the Effect of Silicon Content, Surface Roughness, Droplet Size and Elapsed Time on Wettability of Hypoeutectic Cast Aluminum-silicon Alloys
Characterization of Dynamic Material Property of AlSi10Mg Aluminum Alloy Under High Strain Rate Compressive Loading
Coarsening-resistance of a Severely Deformed Al-0.2wt% Sc Alloy
Current Efficiency for Direct Production of an Aluminium- titanium Alloy by Electrolysis in a Laboratory Cell
Descriptors and Predictors: New Tools for the Predictive Modelling of Production Paths and the Properties of Aluminum-based End-products
Development and Analysis of Al7075 Alloy Materials using Press and Sinter Processing
Effect of Cooling Rate During Solidification of Aluminium-chromium Alloy
Effect of Mg on Flow Behavior of Al-Mg Alloys and Its Constitutive Modelling Using Finite Element Analysis
Effect of Mo on Elevated-temperature Low-cycle Fatigue Behavior of Al-Si 356 Cast Alloy
Effect of Zn Additions on the Mechanical Properties of High Strength Al-Si-Mg-Cu Alloys
Effects of Extrusion Parameters on Microstructural and Mechanical Properties of EN AW 6063
Effects of Mn and Mo Micro-additions on Al-Zr-Sc-Er-Si Mechanical Properties
Effects of Sc and Y on the As-cast Microstructure of AA6086
Effects of Si Content on the Conductivity, Microhardness, Microstructure and Hot Tearing of Al-0.8Fe-0.5Mg-0.4Ni Alloys
Evolution of Grain Refinement in AA5083 Sheet Metal Processed by ECAP
F-11: Effect of Transition Metals Micro-additions on Microstructure and Mechanical Properties Al-Si-Mg Alloy
F-13: Effects of Filtration Paper and Bleaching Earth on Rolling Mill Oil Performance
F-16: Experimental Investigation of MgAl2O4 Spinel Formation in Oxidation of Al-Mg Alloys
F-18: Hybrid Aluminum Sheets with Improved Mechanical Properties by Repeated Roll-bonding Process
F-19: Impact of Dispersion Hardening by Alumina Nano Particles on Mechanical Properties of Al 1100
F-21: Laser Joining of Aluminium and Steel Thin Sheets
F-22: Microstructure Analysis of Graded Interface Layers in a Model Multilayer Al/Al-Zn/Al by Scanning Microbeam Small-angle X-ray Scattering Measurements
F-23: Self-healing Aluminium Alloys
F-25: Synergistic Effects of Cu and Zr V on Microstructure and Mechanical Properties of Al-Si-Mg Cast Alloy
F-26: The Effect of Initial Precipitates on Shear Deformation in 6061 Aluminium Alloy
F-27: The Effect of Profile Shape on Crystallographic Texture of Extruded 6xxx High Strength Aluminium Alloy
F-28: The Effect of Zinc Addition on Corrosion Resistance and Mechanical Properties of Recycled Aluminium Cans
F-29: The Evaluaion of Forged Aluminum Heat Sink for LED Headlight of Automobile
F-5: Aluminum Nanocomposites Made via In-situ Metal-based Pyrolysis: Processing and Microstructure
F-8: Development of Two Cavities' Large Wheel Forming Process Using Semi-solid Forging Technology
High Cycle Fatigue Properties of the Zr-modified Al-Si-Cu-Mg Alloy at Elevated Temperatures
High Strength Nanotreated Filler Material for TIG Welding of AA6061
Hot Deformation and Die-quenching of 6000-series Alloys - the Effect of Quench-interruption Temperature
In-situ Neutron Diffraction Solidification Analyses of Rare Earth Reinforced Hypoeutectic and Hypereutectic Aluminum-silicon Alloys
Influence of Chemical Composition and Pre-deformation on The Age-hardening Response of Al-Mg-Si Alloys
Influence of Thermal Treatment and Design Parameters on the Fatigue Life of Automotive Control Arm Fabricated from A357 Semi-solid Alloy
Influence of TiB2 Particles on Modification of Mg2Si Eutectic Phase in Al-Zn-Si-Mg-Cu Cast Alloys
Microstructure and Mechanical Response of Artificially Aged Al-Mg-Si Alloys: Experiments and Modeling
Molecular Dynamics Simulations of the Solidification of Pure Aluminium
Nanoindentation and Cavitation-induced Fragmentation Study of Primary Al3Zr Intermetallics Formed in Al Alloys
Nanotreating High-zinc Al-Zn-Mg-Cu Alloy by TiC Nanoparticles
Optimization of Thermo-mechanical Processes for Continuous Casting Products using High Aluminum - Magnesium Alloys in Automotive Industry Applications
Plastic Flow of AA6013-T6 at Elevated Temperatures and Subsequent Reaging to Regain Full Strength
Retrogression Forming and Reaging of AA7075-T6 Alclad to Produce Stampings with Peak Strength
Spark Plasma Sintering of Graphene Nanoplatelets Reinforced Aluminium 6061 Alloy Composites
Hide details for [<a href="/PM/PM.nsf/ApprovedAbstracts/6FAB56379C5D63BF852584260051D865?OpenDocument">State Parameter-based SiState Parameter-based Simulation of Temperature- and Strain Rate Dependent Flow Curves of Al-alloys
[Replication or Save Conflict]
Stress Characterization of Bore-chilled Sand Cast Aluminum Engine Blocks in As-cast and T7 Condition with Application of Neutron Diffraction
Ternary Interactions and Implications for Third Element Alloying Potency in Al-Ce-Based Alloys
The Effect of Deformation Mode and Microstructure on the IGC Susceptibility of Al Mg Si Cu Alloys for Automotive Applications
The Efficacy of Replacing Metallic Cerium in Aluminum-cerium Alloys with LREE Mischmetal
The Formation of Al6 (Fe, Mn) Phase Die-cast Al-Mg Alloys
Utilization of 3D Printed Materials in Expendable Pattern Casting Process

Questions about ProgramMaster? Contact programming@programmaster.org