ProgramMaster Logo
Conference Tools for 2021 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Symposium
Meeting 2021 TMS Annual Meeting & Exhibition
Symposium Advanced Real Time Imaging
Sponsorship TMS Functional Materials Division
TMS Structural Materials Division
TMS: Advanced Characterization, Testing, and Simulation Committee
TMS: Alloy Phases Committee
TMS: Biomaterials Committee
Organizer(s) Jinichiro Nakano, U.S. Department of Energy National Energy Technology Laboratory
David E. Alman, National Energy Technology Laboratory
Il Sohn, Yonsei University
Hiroyuki Shibata, Imram, Tohoku University
Antoine Allanore, Massachusetts Institute of Technology
Noritaka Saito, Kyushu University
Anna Nakano, US Department of Energy National Energy Technology Laboratory
Zuotai Zhang, Southern University of Science and Technology
Candan Tamerler, University of Kansas
Bryan Webler, Carnegie Mellon University
Wangzhong Mu, Kth Royal Institute of Technology
David Veysset, Massachusetts Institute of Technology
Scope Real time observations can provide important information needed to understand materials behavior, as these techniques can provide temporal and spatial insights free from artifacts otherwise induced from conventional experimental techniques. Traditional and emerging advanced imaging techniques, which may be optical or non-optical, would allow such observations. Methods may be enhanced with capabilities that enable heating and cooling, controlled atmospheres, and application of stresses; and can be used to generate real time thermodynamic and kinetic data needed to study a variety of materials and processes. This symposium encompasses a broad range of materials science topics enabling cross-cutting opportunities for multiple disciplines (energy materials, functional materials, structural materials, biomaterials, etc.) while similar topics are categorized in the same scope in the technical program. Presentations are solicited on the application of these methods to materials science and industrial processes, as well as on development of such techniques.

Topics include, but not limited to:
- Studies using real time optical (e.g., visible light, white light, laser, IR, and UV) and non-optical (e.g., electron and ultrasound) imaging techniques
- Researches using in-situ, in-operando, in-vitro, and in-vivo observation imaging techniques, such as thermal imaging furnace and other real time imaging methods.
- Confocal techniques, including fluorescence and reflection types, which may be equipped with capabilities such as heating/cooling chambers, gas chambers, mechanical testing, Raman spectroscope, mass spectrometry, and FTIR.
- Microscopic or telescopic imaging methods include hot thermocouple, resistance heating, and sessile drop techniques used for high temperature phenomena.
- Thermodynamic and kinetic data from these techniques, useful for phase diagram constructions, oxidation/corrosion modeling, phase formation kinetics studies, etc.
- Work using high speed and slow speed cameras
- Materials used in manufacturing real time imaging devices
- Novel technologies and methodologies for emerging imaging devices

At TMS2021, the symposium plans to have joint sessions with:
- The Bio-Nano Interfaces and Engineering Applications symposium
- The Mechanical Response of Materials Investigated through Novel In-situ Experiments and Modeling symposium
Respective papers may participate in part of the dedicated sessions.
Abstracts Due 07/20/2020
Proceedings Plan Planned:
PRESENTATIONS APPROVED FOR THIS SYMPOSIUM INCLUDE

An in situ and operando additive manufacturing process replicator for high speed optical, infra-red and synchrotron X-ray imaging
Atomic-scale phase separation induced clustering of solute atoms
Atomic Scale Processes of Initial Oxidation of Cu and Cu-Ni Alloy Revealed by In Situ Environmental TEM
Characterizing Laser-Driven Metal Ejecta Interactions
Comparative study of phase transformations in TRIP steels using HT-LSCM and Dilatometer
Direct Observation of Boron Nitride Dissolution in a Heat Resistant Martensitic Steel using Confocal Scanning Laser Microscopy
Direct observation of pore formation mechanisms during LPBF additive manufacturing process and high energy density laser welding
Dissolution mechanism of oxide particles in silicate melt: a theoretical study supported by in-situ observation experiment
Dynamics of Abnormal Grain Growth in a Particle-Containing System Uncovered by Multimodal Three-Dimensional X-ray Imaging
Evaluating Amplitude Variation of Frequency Spectrum in Ultrasound Imaging by Through Transmission Method
High-speed synchrotron x-ray imaging of metal additive manufacturing processes
High-Velocity Microparticle Impact Modes for Mismatched Metals
In-operando Investigations of Refractory Materials Interacting with Ash/Slag from Mixed Feedstock Gasification
In-operando non-invasive optical visualization of battery reactions and processes
In-situ analysis of select oxygen carrier materials under chemical looping combustion conditions
In-situ investigation of deformation behavior of 5Mn steel at different strain rates by digital image correlation
In-Situ Machine Learning Enabled Spatter Detection in Laser Powder Bed Fusion Additive Manufacturing
In-situ observation of interfacial phenomena between magnetite and matte at high temperature by a novel optical microscopic technique.
In-situ Quantitative Study of Heat Transfer Performance of Mold Flux by Using Double Hot Thermocouple Technology
In-situ real time observation of austenite formation in duplex stainless steels during different cooling conditions
In situ characterization of the Balling Phenomenon in Additive Manufacturing
In situ investigation of the effect of ion irradiation and carbon addition in GST on crystallization and amorphization thresholds
In situ thermoelastic property evolution of Ni-based concentrated solid solution alloys under extremes
Mapping local strains during in situ SEM deformation of nanoporous materials
Observation of surface and interfacial phenomena at high temperature
Observation of the β to α phase transformation under different peak heating conditions using confocal scanning laser microscopy
Quantifying spatter in powder bed fusion processes with high-speed video observations and machine learning
Real-Time Observation of Microstructural Evolution of Holey Hydroxyapatite Nanosheets by In-situ Transmission Electron Microscopy
Real Time Studies of the Mechanics of Spherical Microparticles
Synchronized High-speed Microscopy and Thermo-analytical Measurement for sub-mm/sub-ms-scale Cathodic Behavior in Molten Salt Electrolysis
Ultrafast synchrotron X-ray imaging and modelling of multiphase flow in ultrasound based materials processing
Ultrafast x-ray imaging and complementary techniques at 32-ID beamline of the APS
Wetting and spreading kinetics between liquid CaO-SiO2 slags and a solid SiO2
X-ray Radiography Study on Defects Analysis of Electron Beam Welded Dissimilar Joint between Plain Carbon Steel and Fe-Al Alloy


Questions about ProgramMaster? Contact programming@programmaster.org