ProgramMaster Logo
Conference Tools for 2023 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Symposium
Meeting 2023 TMS Annual Meeting & Exhibition
Symposium Aluminum Alloys, Characterization and Processing
Sponsorship TMS Light Metals Division
TMS: Aluminum Committee
Organizer(s) Julie Levesque, Quebec Metallurgy Center
Stephan Broek, Boston Metal
Scope The Aluminum Alloys, Characterization and Processing Symposium is part of the Light Metals program. This is an excellent opportunity to interact with experts from the Light Metals industry and academia from all over the world and get the latest update on key issues in the industry. The symposium covers all aspects of the physical and mechanical metallurgy of aluminum alloys as well as processing methods (continuous casting is covered by Cast Shop Technology), product development, testing, and implementation of aluminum for end applications, including transportation (automotive, aerospace, and marine), packaging, and other key product segments. You are invited to submit papers of fundamental and applied research in the following subject areas:

- Alloy Development
- Microstructure Evolution and Characterization
- Defect Detection and Control
- Surface Modification and Control
- Mechanical Behavior
- Material and Process Modeling
- Processing Innovation
- Process Control and Measurements
- New Applications and Products

Note regarding publication: Authors seeking an oral presentation opportunity must submit a manuscript for the Light Metals proceedings or be accepted for publication in a TMS journal. Authors seeking a poster presentation are not required to publish a paper, which would be an exceptional case taken by the symposium chair.

Abstracts Due 07/17/2022
Proceedings Plan Planned: Light Metals
PRESENTATIONS APPROVED FOR THIS SYMPOSIUM INCLUDE

A New Recycled Al-Si-Mg Alloy for Sustainable Structural Die Casting Applications
Aluminum alloy design and mechanical properties for next-generation mobility structural materials
AMAG CrossAlloy – A Unique Aluminum Alloy Concept for Lightweighting the Future
Anisotropy of Tearing Behavior in AA7075-T6 Sheet at 200 °C
Assessment of Different Material Behavior Models to Simulate Cast Aluminum Alloy Mechanical Behaviors
Challenges in the production of 5754 automotive alloy sheet via twin roll casting route
Characterization and comparison of properties of aluminum high-strength alloy of the Al-Mg-Sc system produced by laser powder bed fusion and directed energy deposition
Characterization of Aluminium Conductors Steel Reinforced in Overhead Transmission Lines
COMPARISON FINITE ELEMENT SIMULATIONS WITH TENSILE TESTS OF DIFFERENT ALUMINUM ALLOYS
Comparison of additively manufactured and cast aluminum A205 alloy
COMPARISON OF EXPERIMENTAL TEST AND FINITE ELEMENT SIMULATIONS OF CAR CRASH BOXES WHICH MANUFACTURED WITH DIFFERENT ALUMINUM ALLOYS
Comparison of TiB2 and TiC Grain Refiners’ Impact on Surface Quality, Edge Cracking, and Rolling Performance of AA6016 and AA5182 DC-Cast Ingot
Compatibility study of polymeric binders for aluminum binder jet parts
Correlation between the precipitation phase and mechanical properties of Al-Mg-Si(-Cu) based aluminum alloy sheets according to the change in Mg content
CRYSTAL CHEMISTRY AND THERMODYNAMIC MODELLING OF THE Al13(Fe,TM)4 SOLID SOLUTIONS (TM = Co, Cr, Mn, Ni, Pt, V)
Depth Dependent Microstructure and Mechanical Properties of Hot Rolled AA 7075 - T651
Development of a high strength, corrosion resistant, AA6XXX aluminum alloy
Development of High Strength Al-6Mg-X Alloys
Effect of Al-3Ti-1B-1.5Ce Refiner on Microstructure and Mechanical Properties of A356 Aluminum Alloy
Effect of Al-Ti-B Refiner on Microstructure and Properties of A356 Alloy by Continuous Rheo-extrusion
Effect of Alloying Elements on Corrosion Resistance of Quench-Free Al–Ca Alloys for HPDC
Effect of Annealing Process on Recrystallization Microstructure and Properties of 1235D Aluminum Alloy Sheet
Effect of Eu and Er on mechanical properties of 201 and 206 alloys
Effect of Iron and Manganese Content on Microstructure and Mechanical Properties of AlSi11 Alloy in Wheels Produced by LPDC-process
Effect of Mn Content on Quench Sensitivity on 6082 Alloys
Effect of the End-of-Life (EOL) content in High-Pressure Vacuum-Assisted Die Cast (HPVADC) Aural2 (AlSi10Mg-T7) on Corrosion Behavior
Effect of thermal treatment (T5) on microstructure and tensile properties of vacuum high pressure die cast Al-Si-Mg alloy
Effect of Ti addition on the microstructure and mechanical properties of hypo-eutectic and eutectic Al-Si alloys
Effects of Aging Conditions on Fracture Characteristics of Al-Mg-Si Alloys
Effects of Mn Addition on Electrical Conductivities, Tensile Properties and Microstructure of Wrought Al Alloys: An Overview
Effects of the Friction Stir Welding Sliding and Sticking Mechanisms on the Microhardness, Texture, and Element Concentration
Effects of Zn and Cu contents and heat treatment conditions on the precipitation behavior of 7xxx series Al alloy
Enhancing Abrasive Polishing of Aluminum Alloys via a Chemical Effect in Surface Plasticity
Enhancing corrosion resistance through microstructural tuning via cooling rates in ternary Al-13.6Cu-6Si (at%) alloy
Evaluating Fractional Crystallization Methods for Closed-Loop Recycling of End-of-Life Automotive Aluminum Sheet
Evaluating the Earing Amount of Materials Under Various Chemical Composition and Heat Treatment Process with Finite Element Simulations of Cup Drawing Tests
Evaluation of a heat-treatment free alloy for mega casting applications
Evaluation of EN AW 3003 Aluminium Alloy Homogenization with Specific Electrical Resistivity Measurement
Experimental investigation and thermodynamic consideration of oxide inclusions formation in Al-Mg alloys
Experimental investigation of the effect of high temperature shot peening on the surface integrity of 7010-T7452 aluminum alloy
Exploring semi-solid deformation of Al-Cu alloys by a quantitative comparison between drained die compression experiments and 3D discrete element method simulations
Fabricating tubes and plates with variable properties via shear assisted processing and extrusion
Fabrication of bright-rolled aluminum suitable for design elements in the automotive industry
Fluidity and Microstructural analysis of Al-Ni alloys with varied Ni concentrations
Formation and causes of slivers defects in 5xxx rolled aluminum sheets
Fundamental Study on Modified Solidification of 1370 and AlSi7 with and without Commercial Grain Refiners
High temperature deformation analysis of A1-12Ce alloy
How Cerium and Lanthanum as Coproducts Promote Stable Rare Earth Production and New Alloys
Improving the Mechanical Properties of Cast Aluminum Via Ultrasonication-Induced Microstructural Refinement
Influence of Increased Cu and Fe Concentrations on the Mechanical Properties of the EN AB-42100 (AlSi7Mg0.3) Aluminum Alloy
Influence of Mn content and cold-rolling in the precipitation behavior, texture evolution and mechanical response of wrought Al-Cu-Mn (ACM) alloys
Innovative approaches in development of aluminium alloys for packaging industry
Investigation of Corrosion Behavior of 2011 Aluminum Alloy Under Different Heat Treatment Conditions
Investigation the Effects of Natural Aging Parameters on Mechanical Properties of 6082 Alloys
Laser Powder-Bed Fusion AA 7075 aluminium alloy synthesis and characterization
Local Formability improvement of Commercial Aluminum Sheets using Friction Stir Processing
Manufacture of nano-to-micron-scale TiC particulate reinforced aluminium composites by ultrasound-assisted stir casting
Mapping the Laser Additive Manufacturing Process of Aluminium Alloys Through In-situ Synchrotron Radiography
Material Evaluation Framework of Additive Manufactured Aluminum Alloys for Space Optical Instruments
Mechanical Properties and Electrical Properties of Permanent Mold Cast Eutectic Al-1.8Fe Alloy
Mechanical Properties and Microstructures of Clod Rolling Sheets of a Low-cost Continuous Cast Al-1.5Cu alloy with Potential Application in Auto Sheets
Mechanical properties of aluminum matrix composites containing sub-micron high-entropy alloy (HEA) particles
Meshfree simulation and analysis of contact conditions and microstructure evolution in shear assisted processing and extrusion (ShAPE) of Aluminum alloy 7075
Metallurgical and Process-Oriented Factors Affecting Edge Cracking of DC-Cast AA5182 Ingot During Hot Rolling Deformation
Microhardness Analysis of Directionally Solidified Al-Si Alloys
Microstructural and mechanical property assessment of Er and Eu modified A356 alloy
Microstructural and Mechanical Property characterisation of Aluminum Wheels modified with Ti, Nb and MTS
Microstructural Changes on the Al−Cu−Si Ternary Eutectic Alloy with Different Cooling rates
Microstructural Evolution, Mechanical Properties and Faster Aging Kinetics in Friction Extruded AA6061 and AA7075 Alloys
Microstructure and mechanical properties of an Al-Mn-Si alloy microalloyed with post transition metals
Modelling of Al-Mg-Cu light cast alloys behaviors via Finite Element methods with correlation of bifilm index and Computed Tomography Scans
Nanoparticle-Enhanced Arc Welding of Aluminum Alloys
Numerical Simulation of flow of liquid in Molten Pool of Twin Roll Casting Rolling 5182 Aluminum Alloy Strip
Phase equilibria in Al-Fe alloys
QUALITY ASSESSMENT AND FEATURES OF MICRODRILLED HOLES IN ALUMINUM ALLOY USING ULTRAFAST LASER
Reducing the inclusion levels in Aluminum
Relations between microstructure, electrical conductivity and mechanical properties in Al-0.6Mg-0.5Si
Resistance heating analysis of a 7xxx aluminum sheet for hot forming system
Role of impurities on the mechanical behavior and phase stability in Al-Ce-Ni hypoeutectic systems
Secondary Phase Fracture in Molten Aluminum via Low Power Electric Current Processing
Shear Assisted Processing and Extrusion of Unhomogenized Aluminum Alloy 6063 Castings with High Iron Content
Solutionization via Severe Plastic Deformation: Effect on Natural Aging in an Al-Mg-Si-(Mn) Alloy
Study of the effect of iron and heat treatment on the mechanical properties and electrical resistance of Al-Zr alloy wire rod
Study of the Solidification Behavior and Homogenization Heat Treatment of the Investment-Cast Al-Cu Foams: Experimental and Modelling Investigations
Surface characterization methods to evaluate adhesive bonding performance of 6xxx automotive alloys
Temperature dependence of lattice misfit in determining the microstructural evolution of high temperature high strength aluminium alloys - A 3D phase field study
The Effect of Strain Reversal on the Evolution of Microstructure and Hardness during High Pressure Torsion in Al-2.5wt% Mg alloy
The influence of crystallographic texture gradients on the deformation response of aluminum extrusions
The Low-Carbon Production of Wrought Aluminum Alloys based on Post-Consumer Scrap
The myth on the pore formation in aluminum casting on the alloying with rare earth elements
The role of microstructure on strength and fracture anisotropy effects in Al-Mg-Si extrusion alloys
The role of through-thickness variation of texture and grain size on bending ductility of Al-Mg-Si profiles
The role of Ti and B additions in grain refinement of Al-Mn alloy during laser additive manufacturing


Questions about ProgramMaster? Contact programming@programmaster.org