ProgramMaster Logo
Conference Tools for 2021 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Symposium
Meeting 2021 TMS Annual Meeting & Exhibition
Symposium Materials Processing Fundamentals
Sponsorship TMS Extraction and Processing Division
TMS Materials Processing and Manufacturing Division
TMS: Process Technology and Modeling Committee
Organizer(s) Jonghyun Lee, Iowa State University
Samuel Wagstaff, Oculatus
Alexandra E. Anderson, Gopher Resource
Fiseha Tesfaye, Abo Akademi University
Guillaume Lambotte, Boston Metal
Antoine Allanore, Massachusetts Institute of Technology
Scope The key interest areas to be covered in this symposium are all aspects of the fundamentals, synthesis, analysis, design, monitoring, and control of metals, materials, and metallurgical processes and phenomena.

Topics will include:
• Experimental, analytical, physical, and computer modeling of physical chemistry and thermodynamics
• Modeling on the transport phenomena in materials processing and metallurgical processes involving iron, steel, nonferrous metals, and composites
• Second-phase particles in metals and processes, such as non-metallic inclusions and bubbles in metals (steel,
aluminum, silicon, magnesium, etc.) or gas bubbles in slag or electrolyte (foaming, gas evolution or injection, etc.);
the fundamentals (experimental studies or theoretical studies) on the nucleation, growth, motion and removal of
these second-phase particles from the molten metal or reactors
• Physical chemistry, thermodynamics, and kinetics for the production and refining of rare earth metals
• Control of industrial processes in the field of extraction and processing of metals and materials: novel sensors for
hostile-environment materials processes, such as online inclusion detection, temperature, and velocity in molten
materials, surface condition of hot moving products, etc.; innovative online sampling and analysis techniques; models
for real-time process control and quality monitoring systems
Abstracts Due 07/20/2020
Proceedings Plan Planned:
PRESENTATIONS APPROVED FOR THIS SYMPOSIUM INCLUDE

A hybrid model for predicting the end-point phosphorus content of electric arc furnace
A practical way to prevent porosity defects in steel casting component
Addition of Ilmenite Ore to Hematite Ore for Phase Development of Sinter
An Experimental study on the Melting Temperature of Mould Flux under Electromagnetic Field
Carbothermal Reduction of Brazilian Linz Donawitz-LD Steel Sludges
Computational Fluid Dynamics Modeling of Damped Oscillations of Molten Metal Droplets
Considerations of Removing Arsenic from Molten Steel by Adding Rare Earth Elements
Contactless generation of cavitation for particle dispersion in liquid iron and steel
Contactless Inductive Flow Tomography for control of liquid metal flow with electromagnetic actuators
Containerless Materials Processing for Materials Science on Earth and in Space
Cylindrical and Planar Magnetron Sputtering for Microstructural Control
Effect of Dissolution of Titanium Ions on Ti Alloys Electrodeposition from EMIC-AlCl3 Ionic Liquid at Low Temperature
Effect of Inclusion Control on Corrosion Properties of Polar steel
Effect of laser power on the microstructure and properties of 3D printed stainless steel
Effect of Nitrogen on Weldability and the Microstructure in Laser Beam Welding of Duplex Stainless Steel
Effect of Slag Conductivity on Decarburisation Reaction Kinetics
Effect of turbulence inhibitor on molten steel flow in Tundish
Effect of ZrO2 filters on inclusions in steel
Experimental characterization of liquid metal bubble-driven flows modeling the situation in a steel ladle
Experimental measurements and optimized Iida model estimations of viscosity in Vanadium Slag with different FeO content
Experimental study of bubbly flows injected through top submerged lance (TSL) into a liquid metal
FactSage-Based Mass and Energy Balance Calculations Validated Against Plant Data for the Production of Silicomanganese
Flotation of molybdenite in the presence of sheared polyacrylamide flocculants
Influence of basicity (CaO/SiO2) on viscosity and phase structure of Chromium-containing High-titanium Blast Furnace Slag
Influence of Cr2O3 Content on Phase of Chromium-containing High-titanium Blast Furnace Slag
Influence of Natural Convection Caused by Slag Density Difference on Temperature and Solidification of Molten Slag
Influence of rotation speed and temperature on dissolution rate of Cr2O3 in Ti-bearing blast furnace slag
Influence of slab transportation and handling practice on crack sensitivity of micro-alloyed steels
Investigating the Existence, Location, and Variation in Geometry of Ductility Troughs in Steel
Liquid-Liquid Extraction Thermodynamic Parameter Estimator (LLEPE) for Multicomponent Separation Systems
Low temperature aluminothermic reduction of metal oxides
Modelling of Metal Loss in Ferromanganese Furnace Tapping Operations
Numerical simulation of the influence of particle physical properties on flow field during the aeration leaching process
Numerical Simulations of Microscale Metallic Particle Impact using Eulerian Approach
Optimal Design of the Submerged Entry Nozzle Structure and Modification of Technology for ASP Continuous Casting
Research on the Reduction Distribution Strategy of the Multi-Mode Continuous Casting & Rolling Process Control
Research on the Rolling Load Distribution Model Technology of the Multi-Mode Continuous Casting & Rolling Process Control
Stress development simulation in continuously cast steel slabs during cooling process
Study on Evolution of Inclusions in Tinplate Production during RH Refining - Continuous Casting Process
Study on the Effect of Long Shroud Structure on Molten Steel Flow in Single Strand Tundish by Numerical Simulation
The CuCl2-CuSO4-ZnSO4 system at elevated temperatures
Thermodynamic examination of quaternary compounds in the Ag–Fe–(Ge, Sn)–Se systems by the solid-state EMF method
Thermodynamic Modeling of Iron-copper-Sulfuric Acid Solutions during Solvent Extraction and Electrowinning for Copper Production
Thermomechanical Analysis and Experimental Validation of ECAP for Aluminum Sheet Metal
X-ray and neutron radiographic experiments on particle-laden molten metal flows


Questions about ProgramMaster? Contact programming@programmaster.org