ProgramMaster Logo
Conference Tools for 2024 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2024 TMS Annual Meeting & Exhibition
Symposium Composite Materials: Sustainable and Eco-Friendly Materials and Application
Presentation Title Influence of Car Glass Addition as a Replacement of Natural Aggregate on Mechanical and Thermal Properties of Concrete
Author(s) Marcin Malek
On-Site Speaker (Planned) Marcin Malek
Abstract Scope This study aims to assess the effect on material, mechanical and thermal properties of using car glass as aggregate replacements in concrete. Additions of 5.0, 10.0 and 15.0 wt.% car glass were used. As the ratio of car glass increased, the bulk density decreased and the porosity increased. The results showed that all tested mechanical properties increased linearly alongside car glass content. The increase in compressive strength by 15,23, 21.5, 39.7%, in flexural strength by 9.2, 16.4, 27.5%, and in split tensile strength by 10.0, 15.3, 29.7% respectively, compared to reference, was determined. The exponential relationships between the thermal properties and car glass ratio were observed. With the increase of car glass content, thermal conductivity and diffusivity decreased, specific heat increased. The relationships between mechanical properties and density, and between thermal properties and density were found. Also, the correlations between the most important mechanical parameters and other properties were obtained.
Proceedings Inclusion? Planned:
Keywords Composites, Recycling and Secondary Recovery, Characterization

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

Additive Manufacturing of Polymer Matrix Composites With Natural Fibers
Analysis of the Incorporation of Industrial Granite Waste in an Epoxy Matrix on Compression Performance
Artificial Marble From Waste Recycling: Physical and Mechanical Characterization
Assessment of the Tensile and Thermal Properties of Recycled Waste Plastics Composites
C-6: Influence of Addition Waste Aluminum III Oxide on Mechanical and Thermal Properties of Concrete Glass Composite
Cellulose Derived From Banana Peels
Characterization of a Novel Eco-friendly Polymeric Composites Based in Casuarina Powder
Characterization of Polymeric Composites for Piping Repair by Mechanical Testing
Characterization of Ramie Fiber for Polymeric Composties to be Used in High Performance Bikes
Coaxial Layered Carbon Fibers of PAN/Glass Fibers via Dry-jet Wet Spinning Process
Comparative Analysis of Flexural Resistance of Epoxyde Composites Reinforced With Acai Fiber Powder
Design and Characterization of Kevlar/Epoxy Composites Infused with Silicon Carbide (SiC) - Zinc Oxide (ZnO) Nanofillers
Development and Characterization of Bio-epoxy by Cardanol for Polymeric Composites
Development of Eco-friendly Composite for High-performance Flooring by Coffee Grounds Waste
Development of Hard Coating Based in Eucalyptus Sawdust Waste in a Polymeric Composites
Effect of Plasma Low Temperature Plasma on Waste Carbon Fiber for Effective Recycling
Enhancing the Physico-mechanical Properties of Clay Bricks Using Snail Shell Ash as a Sustainable Building Material
Epoxy Matrix Reinforced With Kaolin for Production New Building Materials
Evaluation of Hard Polymeric Composites Coating Based in Granite Powder Waste
High Ampacity Aluminum-graphene Wires for Overhead Conductor Applications
Impact Evaluation of Corn Husk Reinforced Epoxy Composites
Influence of Car Glass Addition as a Replacement of Natural Aggregate on Mechanical and Thermal Properties of Concrete
Influence of the Use of Anti-bubble Additives on the Permeability and Porosity of Anticorrosive Coatings
Inhibition Performance of Snail Shell Nanoparticle Extract as a Sustainable Ecofriendly Inhibitor for API 5L X65 Pipeline Steel Corrosion Towards Acid Activation Environment.
Magnetization of Al-based Alloys by Shear-assisted Solid Phase Processing
Material Developments for 3D/4D Additive Manufacturing (AM) Technologies
Mechanical Characterization of Polymeric Composites Reinforced by Thin Fique Fabric
Multi-walled Carbon Nanotubes and Graphene Oxide Decorated Pitch-derived Carbon Foam Composites for Enhanced Structural and Catalytic Performances
Nanocomposite Materials for Radionuclide Sequestration from Groundwater Environments
Nanoparticle Reinforced Lightweight Metal Composites and Their Characterisation: A Summary
New Circular, Sustainable Building Composite Material Made of Building Wastes
Photocatalytic Nitrate Destruction Studies in Complex Environments
Plastics-to-Carbons: Transforming Plastic Waste Into Diverse Morphologies
Recovery of Vanadium (IV) from Leaching Solution Using Fe-MOF Material
Recycling, Reuse and Conformed of Acrylonitrile Butadiene Styrene (ABS) From Weee Waste
Removal of Cr(III) Ions from Simulated Hydrometallurgical Wastewater by Fe-MOF
Stabilization of Aluminum Dross by Coating With PEG
Study of the Impact Behavior of Epoxy Matrix Composites With Granite Waste
Study on the Adsorption of Selenium-containing Wastewater by MIL-101-NH2
Synthesis and Characterization of Superabsorbent Polymer Hydrogels Containing Silicate Precursors to Internally Cure and Strengthen Cement
Technical Route to Develop High Tg Epoxy Composite That is Water Degradable at Low Temperature
Verification of the Tensile Strength of Polyester Matrix Laminated Composites Reinforced With Raffia, Jute and Glass Fibers

Questions about ProgramMaster? Contact programming@programmaster.org