ProgramMaster Logo
Conference Tools for MS&T21: Materials Science & Technology
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting MS&T21: Materials Science & Technology
Symposium 13th Symposium on Green and Sustainable Technologies for Materials Manufacturing and Processing
Presentation Title Green Method for Preparation of Inorganic Green Pigments
Author(s) Allen Apblett, Travis Reed
On-Site Speaker (Planned) Allen Apblett
Abstract Scope Inorganic pigments can be superior to organic pigments with respect to resistance to oxidative deterioration, fading when exposed to sunlight, and, in some cases, toxicity. It was discovered in this investigation that green pigments could be prepared by the pyrolysis of low-temperature single source precursors. The latter were prepared by precipitation of a solid solution of mixed zinc and cobalt salts of 2-oximinopropionate containing 5 to 10% of cobalt versus zinc. These complexes decompose at low temperature in the solid state to produce fine powders of metal oxides with the simultaneous release of acetonitrile, carbon dioxide, and water. The cobalt-doped zinc oxide produced in this matter is a dark green in color. Beyond use as a pigment, this material can also be applied as a bactericidal agent to control water borne bacterial pathogens and as a photocatalyst for the degradation of methylene blue dye in aqueous medium.

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

A Sustainable and Energy-efficient Electrochemical Technology for Dewatering of Cellulosic Nanomaterials
Addressing Advanced Sustainability with Materials Selection
Bandgap Engineering of Epitaxial â-(AlxGa1-x)2O3 Films Grown via the Spin-coating Method
Continuous Electrochemical Destruction of Contaminants of Emerging Concern (CECs) for Wastewater Treatment
Design of Novel Materials from Corn-based Precursors
Development of Energy Efficient Solid-state Material Processing Technologies for Sustainable Manufacturing
First-principles Studies of Adsorption and Diffusion of Metal on α-Al2O3 for Advanced Manufacturing Applications
Gelation-freezing Derived Mullite Thermal Insulators Prepared by Reaction Sintering with Various Types of Alumina Nanofibers and Silica
Green Method for Preparation of Inorganic Green Pigments
High Temperature Interaction of IN718 on Heated Buildplate
Low-cost Ceramic Composite Membranes for Ultrafiltration of Produced Water
Microstructural Evolution and Mechanical Properties of Shear Assisted Processing and Extrusion (ShAPE) Processed Aluminum Alloys
Now On-Demand Only - A Comparative Study of Vibration Signatures of FDM 3D Printers under Different States of Operation
Now On-Demand Only - Vibration and Mechanical Analysis of FDM Manufactured Soybean Hull Fiber/Polymer Composites
P2-20: Biomass Derived SiO2: Different Waste Resources and Extraction Methods
P2-21: Effect of Steam Injection on Reduction of Dioxin Emission from the Commercial-scale Sintering Plant
P2-22: Metallurgical Quality Analysis of High Nb TiAl Alloy Cast Ingot Prepared by BaZrO3 Crucible
P2-23: Optimization of the Ratio of Air and Fuel in Ignition Chamber of Sintering Machine
P2-24: Research on West Pilbara Fines (WPF) Utilization under Deep Bed Sintering
P2-25: Reform and Practice of Energy Saving and Consumption Reduction Technology of 500 t/d Beckenbach Annular Lime Kiln
P2-26: Study on Application of King Ore Fines in Sintering Process of Shougang Jingtang Plant
Performance Assessment of Sustainable Near-dry EDM Process during Machining of Micro-channels on Ni-Ti Based Shape Memory Alloys
Polymer Derived Coatings for Corrosion Protection of Steels
Preparation of BaZrO3/Y2O3 Composite Refractory and Study on Its Interface Reaction with Ti2Ni Alloy
Preparation of Tin Nanosized Powder by Pulsed Wire Discharge
Room-temperature Densification of MgO Ceramics with Nitride Phosphor Particles
Single Source Precursors for Lanthanum Phosphates
Smart Powder Processing for Sustainable Society
Study on the Interfacial Reaction between BaZrO3 Refractories and Zr Amorphous Alloys
Sustainable Processing of Composite Materials
Sustainable Synthesis of Non-oxide Ceramics in Air
The Printability of Ternary Metal Boride (MAB) Materials Using Laser Powder Bed Fusion
The Use of Waste Materials for the Manufacture of Ceramic Water Filters in Marginalized Communities

Questions about ProgramMaster? Contact programming@programmaster.org