ProgramMaster Logo
Conference Tools for 2021 TMS Annual Meeting & Exhibition
Register as a New User
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2021 TMS Annual Meeting & Exhibition
Symposium Additive Manufacturing of Functional, Energy, and Magnetic Materials
Presentation Title Cold Spray of Permanent Magnets
Author(s) Alexander Baker, Richard Thuss, Nathan Woollett, Elis Stavrou, Scott McCall, Harry Radousky
On-Site Speaker (Planned) Alexander Baker
Abstract Scope Cold Spray Deposition entrains micron scale particles in supersonic gas to direct high-density deposition, but has typically been limited to ductile metals. Recently, we have demonstrated its extension to brittle functional materials, including hard and soft magnets. A range of feedstock powders can be sprayed onto substrates ranging from quartz to copper, and onto curved surfaces. The magnetic properties of the deposited material are governed by powder size and the gas velocity and temperature, formation of deleterious secondary phases can be suppressed by correct choice of processing conditions. A summary of structural, compositional and magnetic characterization results will be presented, highlighting the flexibility and strengths of this manufacturing technique, and offering perspectives for future applications it will enable. Prepared by LLNL under Contract DE-AC52-07NA27344.
Proceedings Inclusion? Planned:


Additive Manufacturing of Functionally Graded Shape Memory Alloys
Additive Manufacturing of Soft Magnets for Electrical Machines—Prospects and Challenges
Advanced Design for Lightweighting Wind Power Generators Using Additively Manufactured Hard and Soft Magnets
An Additive Manufacturing Design Approach to Achieving High Strength and Ductility in Traditionally Brittle Alloys via Laser Powder Bed Fusion
Anisotropy in Thermo-mechanical Properties of NiTi Alloy Processed by Selective Laser Melting (SLM)
Cold Spray of Permanent Magnets
Composition Control in Laser Powder Bed Fusion Additive Manufacturing Through Differential Evaporation
Development of Fine Scale Permanent Magnets with Advanced Manufacturing
Development of High-temperature Permanent Magnet Alloys for Additive Manufacturing
Effect of Process Parameters on the Microstructure and Properties of Additively Manufactured NiTi-Based Shape Memory Alloys
Effect of Processing Parameters on Thermal Cyclic Stability of Nitinol Alloys Manufactured by Selective Laser Melting
Engineered Interconnected Porosity for Enhanced Functional Devices
Establishing Fundamentals for Laser Metal Deposition of Functional Ni-Mn-Ga Alloys: Effect of Rapid Solidification on Microstructure and Phase Transformation Characteristics
Inconel-steel Multi-metal-material by Liquid dispersed Metal Powder Bed Fusion: Microstructure, Stress and Property Gradients
Influence of Composition and Microstructure on Magnetic Properties of Additively Manufactured Fe/Co/Ni Based Soft Magnetic Alloys
Investigation of the Mechanical Properties of the Zamak 5 Alloy by Using Multislide and Conventional Method
Investigation of the Wear Behavior of Zamak 5 Alloy Using Multislide and Conventional Method
Meltpool Oxidation and Reduction and Inclusion Evolution during the PBF Type Additive Manufacturing
Modeling of Selective Laser Melting of NiTi Shape Memory Alloy: Laser Single Track and Melt Pool Dimension Prediction
Review: 3D Printing Energetics
Selective Laser Melting of Defect-free NiTi SMA Parts Using a Process Optimization Framework
Toward Understanding the Effect of Selective Laser Re-melting on the Mechanical Properties of the SLM Fabricated Nitinol

Questions about ProgramMaster? Contact