ProgramMaster Logo
Conference Tools for 2024 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2024 TMS Annual Meeting & Exhibition
Symposium Powder Materials Processing and Fundamental Understanding
Presentation Title Alloy Developments and Microstructural Mechanisms of Improved Plasticity in a Cr-based Nanocrystalline Alloy
Author(s) Bryan Lim, Christopher Fancher, Marissa Brennan, Steve Buresh, Chris Mclasky, Brian Gordon, Michael Spencer, Peeyush Nandwana
On-Site Speaker (Planned) Bryan Lim
Abstract Scope Initial studies show potential for elevated compressive strength and hardness from bulk alloys produced from their nanocrystalline (NC) counterparts. However, the widespread adoption of bulk NC alloys is severely impacted by scale-limited and cost prohibitive severe plastic deformation methods. This is accompanied by inevitable thermal instabilities such as room temperature (RT) grain coarsening. Here, a thermally stable NC Cr-based powder was produced through a proprietary powder manufacturing process based on nanophase separation sintering; resulting in a NC Cr matrix supersaturated with phase separating solutes. Bulk consolidation was achieved via extrusion and upsetting. The bulk alloy presents exceptional compressive strength and plasticity, both at RT and high temperatures (HT, 760 °C); whilst also achieving HT tensile ductility. We present preliminary results on the hierarchical microstructural phenomenology and phase stability owing to these bulk properties, evaluated via multiscale electron microscopy and XRD methods.
Proceedings Inclusion? Planned:
Keywords Characterization, Powder Materials, Mechanical Properties

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

A Nanocrystalline Copper-Hafnium Alloy by Conformal Coating Powder Metallurgy: Microstructure and Thermomechanical Performance
A Sustainable Approach to Developing High-Entropy Alloys Using Commodity Powders: A Proof of Concept Using SPS, PBF-LB/M, and MIM
Aging Responses and Mechanical Properties of Al-Zn-Mg Alloys with high Zn Concentration
Alloy Developments and Microstructural Mechanisms of Improved Plasticity in a Cr-based Nanocrystalline Alloy
An Atomistic Modeling Study of Electric Field Effect on Sintering Mechanisms of Zirconia
Anisotropy in the Binder Jetting and Sintering Process of 316 Stainless Steel
Binder Jet Additive Manufacturing of Cemented Tungsten Carbide: Phase Evolution and Mechanical Response
C-27: Ultrasonic Powder Atomization of NiTi
Composition-Tunable Shrinkage for Ferrous Sintering Setters and Inserts
Controlling and Designing Thermal Gradients during FAST Processing of Titanium Alloy /Composite
Densification of Nanostructured Functional Materials: Innovative Combinations of Low-temperature Strategies
Design Overview and Operational Characteristics of a Custom Designed Continuous Electric Field Assisted Sintering System
Development of Powder Materials for Metal AM
High Entropy Nitrides: Spark Plasma Sintering of Mechanically Alloyed Nitrides to Investigate the Mechanical, Tribological, and Oxidation Properties
Hot Isostatic Pressing of Oxide Dispersion Strengthened Steels: Microstructure and Mechanical Properties
In Situ TEM Characterization of Sintering: New Insights into Densification Mechanisms
Influence of Printing Parameters on Sintering Shrinkage and its Anisotropy in Binder Jetting 3D Printing of AISI 316L Steel
Interface Energy Control for Improved Mechanical Properties in Oxide Nanoceramics
Keeping Dimensional and Geometrical Precision of Holes in 316L Parts Produced by Metal Binder Jetting – Study of the Influence of Size and Inclination
Loose Sintering of Physical Vapor Deposited Powders
Low-oxygen Ti Powders Prepared from TiO2 through Combining Metallothermic Reduction with Electrochemical Reduction
Micromechanical Properties and Microstructures of AC and DC Flash-sintered Alumina
Microstructures and Mechanical Properties of B4C/Al Composites Fabricated by Hot Pressing and Spark Plasma Sintering
Mixing Studies for Oxide Dispersion in IN718 ODS Superalloy
Plateau–Rayleigh Instability with a Grain Boundary Twist
PM Steels for New Energy Production Systems
Porosity Evolution during Heating of Copper Made from Powder by Friction Extrusion
Powder Extrusion of High-energy Ball-milled Particle-reinforced AlSi1MgMn for Lightweight Components
Powder Property Evolution during Die Compaction through Novel Experiments and Coordinated Modeling
Preparation, Structure, and Characterization of SFCA-I
Residual Stress Mapping Using Neutrons of Large-Scale Samples (12-inch Diameter) Created by Electric Field Assisted Sintering
Spark Plasma Sintering Coupled with Stereolithography for the Production of Titanium Complex Shapes
Spark Plasma Sintering of Carbides
Synergistic Enhancement of Mechanical and Tribological Properties in Inconel 718-GNP Composites Fabricated by High-Energy Ball Milling and Spark Plasma Sintering
The Efficient Optimization of Additive Manufacturing Parameters and Post-Build Processing Using Small Punch Test
The Influence of TiB2 Particles on the As-built and Heat Treated Microstructure of IN718 Processed by Direct Energy Deposition
The Strengthening and Deformation Mechanisms of Metal Matrix Nanocomposites
Tungsten Carbide with Low Metallic Binder Contents via Binder Jetting
Visualization of Eu2+/Eu3+ Coactivated BaAl2O4 Phosphor Using X-ray Nanobeam

Questions about ProgramMaster? Contact programming@programmaster.org