ProgramMaster Logo
Conference Tools for 2022 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2022 TMS Annual Meeting & Exhibition
Symposium Advances in Surface Engineering IV
Presentation Title Damage Evolution of HVOF Coatings under Shear Lag Test
Author(s) Deepesh Yadav, Sanjay Sampath, Jaya Nagamani Balila
On-Site Speaker (Planned) Deepesh Yadav
Abstract Scope This study investigated damage evolution i.e. surface cracking and delamination of metallic Ni-based coatings deposited by high-velocity oxy-fuel (HVOF), under shear lag test by using experimental and numerical methods. Experimental results revealed that Ni and Ni-5Al coatings get delaminated when 0.05 and 0.027 strain is reached in substrate respectively and no surface cracking occurs in coatings throughout the test while in NiCrAlY coating surface crack forms at 0.016 strain and delamination of coating starts at 0.035 strain in substrate. Full-scale strain distribution in coatings has been determined by digital image correlation, and stress in coatings and substrate has been determined by using FEM. The cohesive strength of Ni and Ni-5Al coatings are better than NiCrAlY coating while adhesive strength of NiCrAlY coating is better than Ni and Ni-5Al coatings.
Proceedings Inclusion? Planned:
Keywords Surface Modification and Coatings, Mechanical Properties, Other

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

An Electrochemical Study of Ferrous and Nonferrous Materials in an Engine Coolant Environment
An Investigation of the Microstructure and Oil Retention of Electrolyte Jet Plasma Oxidation (EJPO) Coating
Atmospheric Plasma Surface Processing of a 7xxx Al Alloy Surface to Improve Corrosion Resistance
Atomic Origin of Corrosion Passivation in NiCrAl Alloys: A Density Functional Theory Study
Corrosion-resistant Yet Sacrificial Metallic Coatings with an Ability to Release Inhibitor on Demand
Corrosion Behavior of Shear Extruded Mg-3Si Magnesium Alloy: Role of Mg2Si Fragmentation and Grain Refinement
Damage Evolution of HVOF Coatings under Shear Lag Test
Effect of Laser Surface Treatment on Corrosion Behavior of AZ91D Mg Alloy
Effect of Test Temperature on Tribological Behavior of Laser Cladded Stellite 21 Coating on 350 Maraging Steel
Electrochemical Corrosion Tests of Aluminum 1100 Alloy Coupons in Acid Condensate Environment
F-23: Plasma Functionalization of Packaging Waste Derived Sustainable Carbon for Composite Reinforcement
F-24: Role of Surface Mechanical Attritions Processing Conditions on the Corrosion Behavior of Aluminum 7075 Alloys
Finite Element Simulation for the Electropolishing of Niobium
Fluorine from Bad to Good in the Oxidation Behavior of Metallic Materials
HVOF 316L and C276 Metal Cladding for Corrosion Protection
Intermetallic Formation in High-temperature Al/Ni Wetting: A Molecular Dynamics Study
Mapping the Nanomechanical Behavior of Refractory Alloy Nitride Coatings
Microstructural Design via Plasma Variations in Hollow and Planar Cathode Sputtering
Microstructural, Mechanical, and Corrosion Properties of Pulsed Laser Deposited Hexagonal Boron Nitride Nanofilms
Multi-objective Machine Learning Assisted Optimization of Multi-layered PVD Coatings
NOW ON-DEMAND ONLY - Evolution of Friction and Shear Deformation Induced Mixing of Graphene on Copper Substrate
Simultaneous Effects of MC Carbide Formers on Hardness of Wear Resistant Overlays by Design of Experiments and Machine Learning
Strong Covalent Bonding between PMMA/Zn-Mg Alloys Using Grafting-from Technique for Biomedical Applications
Ternary Transition Metal Diborides: A New Generation of Protective Coating Materials?
Towards the Tuning of the Degradation Behaviour of Pure Biodegradable Zn by Laser Texturing
Tribological and Wetting Behavior of Laser Shock Peened High Pressure Cold Sprayed (HPCS) Duplex 316L Stainless Steel
Ultra-high Temperature Oxidation Protection Coatings: Alloying of Transition Metal Borides
Understanding the Mechanism of Laser Shock Peened Austenitic Stainless Steel Welds
Unraveling the Roles of Thickness, Crystallinity and Composition of Powder Passivation Layers during Cold Spraying of Aluminum Powder

Questions about ProgramMaster? Contact programming@programmaster.org