ProgramMaster Logo
Conference Tools for 2021 TMS Annual Meeting & Exhibition
Register as a New User
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2021 TMS Annual Meeting & Exhibition
Symposium Aluminum Alloys, Processing and Characterization
Presentation Title Review of Retrogression Forming and Reaging for AA7075-T6 Sheet
Author(s) Katherine Rader, Jon T Carter, Louis G Hector, Eric M Taleff
On-Site Speaker (Planned) Katherine Rader
Abstract Scope Retrogression forming and reaging (RFRA) is a new warm-forming process designed to produce automotive structural components from high-strength aluminum alloys. A scientific approach is described to determine appropriate RFRA conditions for AA7075-T6 and is applied to laboratory-scale forming experiments. The concept of reduced time is used with the activation energy of retrogression measured for AA7075-T6 to predict appropriate times and temperatures for retrogression forming. Conditions recommended for AA7075-T6 are retrogression at 200°C for 3 to 12 min and forming with strain rates of up to 10-1 s-1. The recommended reaging heat treatment to fully restore strength to the T6 condition after retrogression forming is 120°C for 24 h. These RFRA conditions are successfully applied in laboratory-scale experiments to form AA7075-T6 Alclad sheet and produce a final strength equivalent to the T6 condition. Data from tensile tests provide flow stresses and tensile ductilities across the range of conditions appropriate for RFRA.
Proceedings Inclusion? Planned: Light Metals


Al-Sm Alloys Under Far-from-Equilibrium Conditions
Anodization Compatibility of Eutectic Aluminum-Cerium Alloys
Characterization of the Microstructure of Al-Mg Alloy Matrix Syntactic Foam by Three-dimensional Analysis
Comparison of Simulation and Real Life to Set Up Holistic Approach for Extrusion Process
Computational Simulation of Nanoparticle Distributions in Metal Matrix Composite Casting Processes
Effect of Extrusion Process on Mechanical, Welding and Corrosion Behaviour of 6XXX Series of Aluminium Alloys
Effect of Heat Treatment on the Microstructure and Mechanical Properties of LB-PBF AlSi10Mg and Scalmalloy
Effect of Minor Additives to Al-Zn-Mg Alloys on Welding and Corrosion Performance for Building Constructions
Effect of Thermomechanical Processing on Strengthening of the 5181 Alloy (with 0.03 %Sc) Sheets for Preservation of 40 % Improved Strength Compared with 5083
Effects of Ultrasonic Melt Processing on Microstructure, Mechanical Properties and Electrical Conductivity of Hypereutectic Al-Si, Al-Fe and Al-Ni Alloys with Zr Additions
Experimental and Numerical Examinations Regarding the Material Flow of Combined Rolling Extrusion Process
Fatigue and Failure Analysis of an Additively Manufactured Contemporary Aluminum Alloy
High-throughput Aluminum Alloy Discovery Using Laser Additive Manufacturing
Influence of the Quench Rate and Trace Elements on 6XXX Alloys
Introductory Comments: Aluminum Alloys, Processing and Characterization
Investigation of Weld Quality for Friction Stir Welding of Extrued 6XXX Series Aluminium Alloys
Manufacturing A206 Aluminum Alloy by Step Sand Casting: Effect of Solidification Time on Mechanical and Surface Properties of the Cast Samples Using Experimental and Simulation Results
Microchemistry Evolution for 8xxx Alloys by Homogenization
Microstructural Evolution of Ultra-fine Grained (UFGs) Aluminum in Tribological Contacts
Microstructure and Mechanical Properties of a Precipitation-hardened Al-Mn-Zr-Er Alloy
Microstructure Evolution of an Al-Fe-Ni Alloy with Zr and Sc Additions Upon Different Cooling Rates during Solidification for Improving the Mechanical and Electrical Conductivity Properties
Phase Formation of Mo- and Cr-rich Compounds in an Al-Si Cast Alloy
Review of Retrogression Forming and Reaging for AA7075-T6 Sheet
Shear Assisted Processing and Extrusion of Aluminum Alloy 7075 Tubing at High Speed
Shear Assisted Processing and Extrusion of Thin-walled AA 6063 Tubing
Simulations of Wear-induced Microstructural Evolution in Nanocrystalline Aluminum
The Combined Method for Producing Long Products from Aluminium and Aluminium Alloys
The Corrosion Behavior of 5xxx and 6xxx Aluminum Alloys with Trace Calcium
The Effect of Al3Er Particles on the Structure and Mechanical Properties of an Al-Mg Alloy
The Effect of Rare Earth Mischmetal on the High Temperature Tensile Properties of an A356 Aluminum Alloy
Thermal Analysis of the Solidification Behavior of AA7075 Containing Nanoparticles
Thermal Properties of Hybrid Al-Cu-Components Produced by Combining Powder Pressing and Semi-solid Forming Strategies
TIG Welding of Dissimilar High-Strength Aluminum Alloys 6061 and 7075 with Nano-treated Filler Wires
Understanding the Effect of Quench Delay and Alloy Chemistry on Various 6000 Series Alloys Systems

Questions about ProgramMaster? Contact