ProgramMaster Logo
Conference Tools for 2020 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2020 TMS Annual Meeting & Exhibition
Symposium Powder Materials for Energy Applications
Presentation Title Is Additive Manufacturing a Competition or Complimentary Technology to Current Processing of Metals?
Author(s) Wojciech Z. Misiolek
On-Site Speaker (Planned) Wojciech Z. Misiolek
Abstract Scope Analysis of Additive Manufacturing competitiveness will be performed using mechanical properties of 3D printed parts of selected metals and alloys. Copper has its prominent place among other metals as very good conductor. There is huge opportunity for copper and copper alloys to be used in electro-mechanical devices and machinery while fabricated by the additive manufacturing techniques. Selective Laser Melting (SLM) approach was used to fabricate samples in two copper systems, namely Cu-Si and Cu-Ni-Si. After optimization of the SLM process samples were printed under various conditions and their density, mechanical properties were evaluated. A heat treatment was used for Cu-Ni-Si alloy to strengthen it via precipitation hardening process to achieve comparable mechanical results to traditionally used today wrought alloys. Additional AM experiments were performed for Tungsten and Aluminum Alloys since these metal systems are very important for various applications and potential Additive Manufacturing could create new possibilities for these metals.
Proceedings Inclusion? Planned: Supplemental Proceedings volume

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

Advanced Skutterudite-based Thermoelectric Unicouples by Near Net Shape Powder-based Fabrication for Future Space Power Applications
Bulk Supercrystalline Nanocomposites with Enhanced Mechanical Properties for Multifunctional Applications
Cold Spray Deposition of 304L Stainless-steel Powder on Used Fuel Dry Cask Storage Systems to Control Potential Stress Corrosion Cracking
Cubic Sub-micron BiFeO3 Powders for Improved Electrical Properties
Effect of Particle Spreading Dynamics on Powder Bed Quality
Fabrication of Complex Shape Components by Spark-plasma Sintering Utilizing 3D-printed Controllable Interface
Fabrication of Uniform-sized Hemispherical Mesopores on Gold-coated Silver Nanocubes for Enzyme Immobilization
Flash Sintering: From Fundamental Science to Energy-saving Materials Processing
Influence of Powder Microstructure on Cold Spray Deposited Cr Coatings for High Temperature Oxidation Resistance
Investigation of the Powder Processing of Near-final Shape AlNiCo Magnets for Eventual Use in Electric Drive Motors
Is Additive Manufacturing a Competition or Complimentary Technology to Current Processing of Metals?
Materials for Nuclear Applications Produced by Powder-based Techniques
Microstructural Evolution of a Nanostructured Ferritic Alloy Composite during In-situ Ion Irradiation
Microstructural Evolution of NFA and Cr3C2@SiC-NFA Composite during Ion Irradiation
Miscibility Gap Alloy Thermal Storage Materials
Next Stage Development of Iron-based GARS Alloy Powders for Cold Spray Deposition of ODS Structural Materials for Extreme Environments
Novel Additive Manufacturing Process Design for U3Si2 Fuel
Peltier Effect during Spark Plasma Sintering of Boron Carbide
Powder Metal Technology for High-performance Materials with Harmonic-structure
Processing and Characteristics of Nanostructured Ferritic Alloys for Nuclear Reactor Applications
Superelastic Zirconia Powder for Shockwave Dissipation in Energy Infrastructure
Synthesis, Sintering, and Electrochemical Properties of Lithium Conducting Garnets from Molten Salt Fluxes for All-Solid-State Lithium Batteries
Toward New Flash and Energy Efficient Fabrication Processes based on Sintering

Questions about ProgramMaster? Contact programming@programmaster.org