ProgramMaster Logo
Conference Tools for MS&T22: Materials Science & Technology
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Symposium
Meeting MS&T22: Materials Science & Technology
Symposium Additive Manufacturing of Metals: Microstructure, Properties and Alloy Development
Sponsorship
Organizer(s) Prashanth Konda Gokuldoss, Tallinn University of Technology
Jurgen H. Eckert, Erich Schmid Institute of Materials Science
Zhi Wang, South China University of Technology
Scope Additive Manufacturing (AM) s one of the emerging fields, which is seen as the manufacturing process for the future. AM continues to attract the attention of professional communities including research, design, and process engineers. However, more research is required to fully understand the capabilities of these processes and the correlation between process conditions, process parameters, microstructure, and other material properties. Another main challenge is alloy development, where it has been realized that alloys specific for additive manufacturing processes should be developed in order to completely utilize the benefits of these additive manufacturing processes. This symposium will focus on materials, alloy development their processing, properties, and microstructure for the different AM processes. In addition, emphasis will be placed on understanding the capabilities of the processes and the correlation between process conditions, process parameters, microstructure, and other material properties. We invite papers on alloy design and materials development, processing of materials, microstructure, and the resultant properties of AM materials. Suitable topics for this symposium include, but not limited to: - Ferrous alloys including steels - Al-based alloys - Cu-based alloys - Co-based alloys - Mg-based alloys - High entropy alloys - Intermetallics - Metallic glasses - Metal matrix composites (including cermets and ODS alloys), etc.
Abstracts Due 05/15/2022
Proceedings Plan Planned: Other
PRESENTATIONS APPROVED FOR THIS SYMPOSIUM INCLUDE

A Compositional and Microstructural Understanding of Powder-blown Directed Energy Deposition (DED) Used for Functionally Graded Ni-superalloys Alloys for Hot-and-harsh Gas Path Environments
A Direct Laser Deposition Investigation of Microstructure-Processing-Property Relationships in NbVZr-based Alloys
Additively Graded Materials for Thermal Management
Aging Response of Laser Powder Bed Fusion 17-4PH Stainless Steel
Al Nanoparticle inside Si Grain of Al-Si Alloy by Powder Bed Fusion Using an Electron Beam
Aluminum Matrix Composites Reinforced with Multi-walled Carbon Nanotubes and C₆₀ Manufactured by Laser Powder Bed Fusion
AM Processing and Microstructural Evolution in Nickel-based Superalloys
An Investigation into the Effects of CoAl2O4 Oxide Addition on Melt Pool Geometry and Microstructure in Alloy 718 Processed by Laser Powder Bed Fusion
Automated Serial Sectioning for Validation of X-ray Computed Tomography of Additively Manufactured Alloys
Binder Jet Additive Manufacturing Process Parameters Effect on Magnetic Performance of Fe-50Ni Alloy
Binder Jetting of Ultra-fine 316L Austenitic Stainless Steel Powder: Microstructure Observation and Mechanical Properties
Characterizing the Effects of Laser Power, Scanning Velocity, and Deposition Temperature on Inconel 718 Single-track Melt Pool Geometry in Laser Powder Bed Fusion
Crack Mitigation Strategies In Laser Powder Bed Fusion of Pure Tungsten
Crystallographic Relationships between the Prior-beta Structure and Precipitate Phases in Additively Manufactured Nickel Aluminum Bronze
Design New Feedstock Materials for Additive Manufacturing Using a Commercial Alloy Powder Mixture
Design of Decarburization after Application of Self-Terminating Dissolution to SS316L Processed by Laser Powder Bed Fusion
Development of High Pressure Heat Treatment for L-PBF F357
Different Additive Manufacturing Routes for Magnetic Shape Memory Alloys
Directed Energy Deposition of Bi-metallic Tensile Specimens by Direct Bonding of Inconel 625 to Stainless Steel 304
Effect of Hot Isostatic Pressing on Mechanical Properties of Additively Manufactured Ni-based Superalloy Rene65
Effect of Hyaluronic Acid and Proteins on the Corrosion Behavior of Additively Manufactured Stainless Steel 316L
Effect of Post-heat Treatment on the Microstructure and Mechanical Properties of High-carbon High-chromium Tool Steel Manufactured by Direct Energy Deposition
Effect of Surface Roughness on the Fatigue Behavior of Binder Jet Printed Ultra-fine 316L Austenitic Stainless Steel Powder
Effect of Thermo-mechanical Treatment on Mechanical Performance of Cold Spray Additively Manufactured Deposits
Effects of Process Parameters on Mechanical Behavior of Wire Arc Additive Manufactured (WAAM) AISI 316LSi
Electron Beam Powder Bed Fused Haynes-282 Builds Containing Thin Wall Struts of Varying Thicknesses
Embedding Information in Additively Manufactured Metals via Magnetic Property Grading for Traceability and Counterfeiting Prevention
Evaluation of a Quasicrystal-Reinforced Al Alloy as a Candidate for Additive Manufacturing
Exceptional Ductility Induced by The Intrinsic Grain Boundary Engineering
Extraordinary Combination of Strength and Ductility in an Additively Manufactured Fe-based Medium Entropy Alloy through the In-situ Formed Nanoprecipitate
Fabrication of Molybdenum Based Refractory Alloys Using Additive Manufacturing
Framework for Designing Additively Manufactured Metallic Functionally Graded Materials
From Chemistry at the Scale of Printing to Bulk Quantitation: A Powerful Tool for Characterizing Additive Manufacturing Materials
In-situ and Ex-situ Characterization of Inconel 738 Subjected to Additive Manufacturing
Influence of Post-Processing Techniques on Process-induced Defects in AM AlSi10Mg and CP-Ti
Influence of Substrate Geometry and Feedstock Morphology on the Mechanical and Metallurgical Properties of Direct Energy Deposition Stainless Steel 316L
L-DED Processability of AISI 410L Stainless Steel
Laser-powder Bed Fusion and Mechanical Properties of Al18Co30Cr10Ni32 Eutectic Multi-Principal Element Alloy
Laser-Stirred Powder Bed Fusion of High Strength Aluminum Alloys
Laser Powder Bed Fusion of 14YWT Oxide Dispersion Strengthened Steel Produced Using Gas Atomized Reaction Synthesis Precursor Powder
Laser Powder Bed Fusion of Pure Nb Powder and Nb+WC Powder Blend
Laser Powder Bed Fusion of Ultra-High Strength Steel from Gas Atomized Powders
Laser Powder Bed Fusion Process: Effect of Laser Remelting/Scanning/Pulsing/Shaping
LPBF of Tungsten Heavy Alloys
Material Qualification of IN625 for Binder Jet Printing
Measurement and Classification of SLM Feedstock Powders by X-Ray Microscopy and Machine Learning
Mechanical and Microstructure Analysis of 4130 Steel Alloy Produced Using Laser Powder Bed Fusion
Microstructure and Mechanical Properties of Co-based Superalloy with γ/γ' Microstructure Fabricated by Laser Powder-bed Fusion
Microstructure and Mechanical Properties of Laser Powder Bed Fusion Aluminum Matrix Composite Reinforced with Al2O3 Nanofibers
Microstructure and Mechanical Property Stability of Wire Arc Additive Manufactured Stainless Steels after Long-Term Thermal Aging
Microstructure Development and Creep Resistance of Selective Laser Melted Al-Fe-Mn-Si-Zr Alloy
Microstructure Evolution and Mechanical Properties of 3D Printed and Sintered Copper Parts
Multi-material Additive Manufacturing with Inconel 718 and GRCop-84
Multi-scale Microstructural Characterization of Additively Manufactured 7050 Aluminum Alloy Subjected to Post-processing Treatments
Nitride Formation and Their Influence on Delta Phase Precipitation in Additively Manufactured Nickel Superalloys
Novel High-Manganese TRIP/TWIP Steel Wire Feedstocks for Use in Wire Arc Additive Manufacturing
On the Utility of Using Volumetric Energy Density for Microstructure and Defect Predictions in Laser Powder Bed Fusion Additive Manufacturing
Optimizing the High Temperature Mechanical Performance of Haynes 282 Printed via Laser Powder Bed Fusion
Origin and Evolution of Defects during Sintering in Binder-Jet Printed 625 Alloy
Origin of Epitaxy Loss in Laser Powder Bed Fusion
Parameter Exploration and Controlled Defect Studies in High Deposition Rate Wire Arc Directed Energy Deposition of 316L for Pressure Retaining Components
Post-heat Treatment Design of Haynes 282 Alloys Processed by Wire-arc Additive Manufacturing
Post-process Heat Treatment Effects on Additive Manufactured Pure Copper
Printability and Defects in W & W -alloys by Directed Energy Deposition
Processing of High Quality Tungsten Through Electron Beam Melting
Reduction in Shrinkage of Binder Jet Printed Large Stainless-Steel Parts Using Novel Metal Powders
Regional Mechanical Performance and the Effects of Surface Defects in AM Al-10Si-Mg
Simplifying Post-Processing of Copper Alloys Using
Solving Solidification Cracking in Laser Powder Bed Fusion Haynes 230
Stainless Steel and Aluminum Alloy Development for Highly Consistent and Isotropic Properties in Laser Powder Bed Fusion
Suitability of CoCrFeMn(Ni3Al)x High Entropy Alloys for Additive Manufacturing
Superalloy IN625 as a Candidate for Additively Manufactured Injectors for Hydrogen Combustion in Power Generation
Surface Nanotextured Powders for 3D Printing of High Reflectivity Metals
Systematic Approach to Determining Ideal Process Parameters for Low Alloy Steels in Directed Energy Deposition
Temporary Coating to Improve Part Integrity and Post-Sintering Surface Roughness of Binder Jet Printed Tungsten Carbide-Cobalt Parts
The Competition of Failure Modes in an Additively Manufactured Disk Superalloy
The Development of a Directed Energy Depositon (DED) Printability Framework for Improving Part Density and Performance in High Strength Martensitic Steels
The Effect of Build Height on the Metallurgical Characteristics of 17-4 PH Stainless Steel Manufactured through DED
The Effects of Microstructure and Chemistry on Corrosion Behavior in Additively-manufactured 316L Stainless Steel
The Effects of Post-Weld Processing on Friction Stir Welded Additive Manufactured AlSi10Mg
The Role of Nucleation in Determining the Microstructure Development in Rapidly Solidified Alloys
Thermal and Microstructural Characterizations of GRCop-84/In718 Composite Structure Fabricated by DED Machine
Tortuosity and Flow Characterization towards 3D Binder-Jet Printed N95 Mask Filter
Towards the Laser-based 4D Printing of Ni-Mn-Ga Magnetic Shape Memory Alloy Actuators
Tuning the Microstructure and Mechanical Properties of AlSi10Mg Alloy via In-situ Heat-treatments in Laser Powder Bed Fusion
Understanding the Effects of Residual Stress in Mechanical Behavior of SS-316L Manufactured by Laser-wire DED Process
Understanding Variations in Solidification Behavior of Additively Manufactured 316L Printed via Laser-Wire Directed Energy Deposition
Visualization of Metallic Alloy Microstructural Evolution under Additive Manufacturing Conditions


Questions about ProgramMaster? Contact programming@programmaster.org