ProgramMaster Logo
Conference Tools for 2020 TMS Annual Meeting & Exhibition
Register as a New User
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Symposium
Meeting 2020 TMS Annual Meeting & Exhibition
Symposium Materials Processing Fundamentals
Sponsorship TMS Extraction and Processing Division
TMS: Process Technology and Modeling Committee
Organizer(s) Jonghyun Lee, Iowa State University
Guillaume Lambotte, Boston Metal
Samuel Wagstaff, Oculatus
Antoine Allanore, Massachusetts Institute of Technology
Fiseha Tesfaye, Abo Akademi University
Scope The key interest areas to be covered in this symposium are all aspects of the fundamentals, synthesis, analysis, design,
monitoring, and control of metals, materials, and metallurgical processes and phenomena.

Topics will include:
• Experimental, analytical, physical, and computer modeling of physical chemistry and thermodynamics
• Modeling on the transport phenomena in materials processing and metallurgical processes involving iron, steel, nonferrous metals, and composites
• Second-phase particles in metals and processes, such as non-metallic inclusions and bubbles in metals (steel,
aluminum, silicon, magnesium, etc.) or gas bubbles in slag or electrolyte (foaming, gas evolution or injection, etc.);
the fundamentals (experimental studies or theoretical studies) on the nucleation, growth, motion and removal of
these second-phase particles from the molten metal or reactors
• Physical chemistry, thermodynamics, and kinetics for the production and refining of rare earth metals
• Control of industrial processes in the field of extraction and processing of metals and materials: novel sensors for
hostile-environment materials processes, such as online inclusion detection, temperature, and velocity in molten
materials, surface condition of hot moving products, etc.; innovative online sampling and analysis techniques; models
for real-time process control and quality monitoring systems
Abstracts Due 07/15/2019
Proceedings Plan Planned:

A Quantitative Study of Microsegregation Mechanisms in Aluminum Binary Alloys
Contactless Ultrasound in Copper and Nickel Melts
De-mineralization of a High Ash Coal in Acidic Salt Solution
Effects of Al Substitution for Zn on the Non-equilibrium Solidification Behavior of Zn−3Mg Alloys
Empirical Study of Laser Cleaning of Rust, Paint and Mill Scale from Steel Surface
Heterogeneous Microstructure Induced Mechanical Responses in the Welded Joint of EH420 Shipbuilding Steel under High Heat Input Electro-gas Welding
Hot Deformation Behavior and Processing Maps of 9Cr1Mo Rotor Steel
Influence of Laser Intensity and Speed of Scanning on the Ultimate Tensile Strength and Metallurgical Properties of Laser Cladded Ti-6Al-4V+Ni/Ti-6Al-4V Composite Coating
Investigating Short-chain Alcohol Based Microemulsions as Viable Nanoparticle Synthesis Systems: Do Reverse Micelles Form in Ethanol/AOT/n-Heptane Systems?
M-66: Effects of Welding Conditions and Post Weld Heat Treatment on Precipitation of Widmanstätten-austenite of Duplex Stainless Steels
M-68: Experimental and Numerical Investigation on Surface Damage of Cold Rolled Sheet Caused by Inclusion Movement
M-71: Machine Learning Approaches for Prediction Mechanical Properties of Austenitic Stainless Steels
M-72: Morphological and Thermal Analysis of Peruvian Residues from a Sludge Site of an Integrated Steel Plant
M-73: Numerical Study of Inclusion Removal in Gas Stirred and Electromagnetically Stirred Ladles
M-74: Ordered Arrangements of BaTiO3 Powders of Cubic Morphologies
M-77: Thermodynamic Properties of Layered Tetradymite-like Compounds of the Ag–Ge–Sb–Te System
Mathematical Modeling of Strip Slipping on Bridle Roll of Skin Pass Mill During Speed-up Process
Modified Gouy-Chapman-Stern Model of the Aqueous Na-AOT Reverse Micelle Sub-structure with the Addition of Salts
Multiple Crystallization Pathways on Highly Supersaturated Aqueous Solutions
Non-crystallographic Branching in Polymer Crystallization: a Molecular Picture of the Onset of Spherulite Formation
Numerical Modelling of Additive Manufactured Ti-Al-Si-Cu/Ti-6Al-4V Composite by Direct Laser Metal Deposition (DLMD) Technique
Observation of Recrystallization Behavior of Nb-microalloyed Wide Flange Beams during Hot Rolling
Preliminary Research into the Effects of Electric Field & Current on Reactive Processing of Ni 3 Al-CNT Composites
Printed Circuit Board Leached Residue as a Substitute Reducing Agent in Pyrometallurgical Processes
Structural Study of a Levitated Salt Solution Using a Containerless Scattering Method
Structure-thermodynamics Interrelation for the GeO2 and PdO Containing MgO-saturated Ferrous Calcium Silicate (FCS) Slag Relevant to E-waste Processing
Teaching Metal-forming Processes Using a Laboratory Micro-extrusion Press
The Effect of Side Arcs on Current Distributions in Submerged Arc Furnaces for Silicon Production
The Effect of Thermomechanical Processing on the Microstructural Evolution of Nickel-based Alloy 625
Thermodynamic Modeling of as Oxide in the Na2O-CaO-MgO-SiO2 System and its Application to as Oxide Stabilization Process using Glass Formation
Thermodynamic Modeling of Metal Distribution in Electrolytic Extraction

Questions about ProgramMaster? Contact