ProgramMaster Logo
Conference Tools for 2020 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2020 TMS Annual Meeting & Exhibition
Symposium Materials Processing Fundamentals
Presentation Title Structure-thermodynamics Interrelation for the GeO2 and PdO Containing MgO-saturated Ferrous Calcium Silicate (FCS) Slag Relevant to E-waste Processing
Author(s) Mohammad Mehedi Hasan, M. Akbar Rhamdhani, Mohammad Hossaini Shuva, Geoffrey Brooks
On-Site Speaker (Planned) M. Akbar Rhamdhani
Abstract Scope In black copper smelting, the recovery of the valuable metals from the electronic waste depends on the slag and copper’s chemistries. It is therefore important to understand the slag chemistry and its relation to the structure, thermodynamics and how these are affected by processing conditions. This paper explains the recent work from the authors on the study of the structure of MgO saturated Ferrous-Calcium-Silicate (FCS) slags containing Cu2O, GeO2 and PdO investigated using FTIR (Fourier-Transformed Infra-Red) spectroscopy. The effect of slag chemistry on the structure of silicate slag was evaluated. The partition ratio of Ge and Pd in slag and copper was correlated to the structure of the FCS slags. It was found that acidic slags with lower nonbridging oxygen per tetrahedra (NBO/T) are more favourable for Ge-partitioning to copper and for Pd the relation is the opposite.
Proceedings Inclusion? Planned:

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

A Quantitative Study of Microsegregation Mechanisms in Aluminum Binary Alloys
Contactless Ultrasound in Copper and Nickel Melts
De-mineralization of a High Ash Coal in Acidic Salt Solution
Effects of Al Substitution for Zn on the Non-equilibrium Solidification Behavior of Zn−3Mg Alloys
Empirical Study of Laser Cleaning of Rust, Paint and Mill Scale from Steel Surface
Heterogeneous Microstructure Induced Mechanical Responses in the Welded Joint of EH420 Shipbuilding Steel under High Heat Input Electro-gas Welding
Hot Deformation Behavior and Processing Maps of 9Cr1Mo Rotor Steel
Influence of Laser Intensity and Speed of Scanning on the Ultimate Tensile Strength and Metallurgical Properties of Laser Cladded Ti-6Al-4V+Ni/Ti-6Al-4V Composite Coating
Investigating Short-chain Alcohol Based Microemulsions as Viable Nanoparticle Synthesis Systems: Do Reverse Micelles Form in Ethanol/AOT/n-Heptane Systems?
M-66: Effects of Welding Conditions and Post Weld Heat Treatment on Precipitation of Widmanstätten-austenite of Duplex Stainless Steels
M-68: Experimental and Numerical Investigation on Surface Damage of Cold Rolled Sheet Caused by Inclusion Movement
M-71: Machine Learning Approaches for Prediction Mechanical Properties of Austenitic Stainless Steels
M-72: Morphological and Thermal Analysis of Peruvian Residues from a Sludge Site of an Integrated Steel Plant
M-73: Numerical Study of Inclusion Removal in Gas Stirred and Electromagnetically Stirred Ladles
M-74: Ordered Arrangements of BaTiO3 Powders of Cubic Morphologies
M-77: Thermodynamic Properties of Layered Tetradymite-like Compounds of the Ag–Ge–Sb–Te System
Mathematical Modeling of Strip Slipping on Bridle Roll of Skin Pass Mill During Speed-up Process
Modified Gouy-Chapman-Stern Model of the Aqueous Na-AOT Reverse Micelle Sub-structure with the Addition of Salts
Multiple Crystallization Pathways on Highly Supersaturated Aqueous Solutions
Non-crystallographic Branching in Polymer Crystallization: a Molecular Picture of the Onset of Spherulite Formation
Numerical Modelling of Additive Manufactured Ti-Al-Si-Cu/Ti-6Al-4V Composite by Direct Laser Metal Deposition (DLMD) Technique
Observation of Recrystallization Behavior of Nb-microalloyed Wide Flange Beams during Hot Rolling
Preliminary Research into the Effects of Electric Field & Current on Reactive Processing of Ni 3 Al-CNT Composites
Printed Circuit Board Leached Residue as a Substitute Reducing Agent in Pyrometallurgical Processes
Structural Study of a Levitated Salt Solution Using a Containerless Scattering Method
Structure-thermodynamics Interrelation for the GeO2 and PdO Containing MgO-saturated Ferrous Calcium Silicate (FCS) Slag Relevant to E-waste Processing
Teaching Metal-forming Processes Using a Laboratory Micro-extrusion Press
The Effect of Side Arcs on Current Distributions in Submerged Arc Furnaces for Silicon Production
The Effect of Thermomechanical Processing on the Microstructural Evolution of Nickel-based Alloy 625
Thermodynamic Modeling of as Oxide in the Na2O-CaO-MgO-SiO2 System and its Application to as Oxide Stabilization Process using Glass Formation
Thermodynamic Modeling of Metal Distribution in Electrolytic Extraction

Questions about ProgramMaster? Contact programming@programmaster.org