ProgramMaster Logo
Conference Tools for 2022 TMS Annual Meeting & Exhibition
Register as a New User
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Symposium
Meeting 2022 TMS Annual Meeting & Exhibition
Symposium Aluminum Alloys, Processing and Characterization
Sponsorship TMS Light Metals Division
TMS: Aluminum Committee
Organizer(s) Andre B. Phillion, McMaster University
Dmitry G. Eskin, Brunel University
Scope The Aluminum Alloys, Processing and Characterization Symposium is part of the Light Metals program. This is an excellent opportunity to interact with experts from the Light Metals industry and academia from all over the world and get the latest update on key issues in the industry. The symposium covers all aspects of the physical and mechanical metallurgy of aluminum alloys as well as processing methods (continuous casting is covered by Cast Shop Technology), product development, testing, and implementation of aluminum for end applications, including transportation (automotive, aerospace, and marine), packaging, and other key product segments. You are invited to submit papers of fundamental and applied research in the following subject areas:

- Alloy Development
- Microstructure Evolution and Characterization
- Defect Detection and Control
- Surface Modification and Control
- Mechanical Behavior
- Material and Process Modeling
- Processing Innovation
- Process Control and Measurements
- New Applications and Products

Note regarding publication: Authors seeking an oral presentation opportunity must submit a manuscript for the Light Metals proceedings or be accepted for publication in a TMS journal. Authors seeking a poster presentation are not required to publish a paper, which would be an exceptional case taken by the symposium chair.

Abstracts Due 07/19/2021
Proceedings Plan Planned: Light Metals

0.18 mm 5042 H49 Alternative 0.18 mm 5754 H49 Pre-painted Product Production Used in Suspended Ceiling Profiles
A study on the improvement of plastic deformability and thermal conductivity of high strength aluminum alloy
Al-Mg2Si-Mg alloys: Microstructure and mechanical properties from high pressure die casting to additive manufacturing
Alloy Design Strategies for the Coloring Alloys: Development of Al-Mg-Si Alloys with ADC12 and AZ91 Alloys
An advanced industrial methodology for optimizing the properties and the process of homogenization for extruded AA2xxx & AA6xxx
An Analysis of the Mechanical Properties of Two Aluminum Automotive Sheet Alloys Processed from Thin Gauge As-Cast Ingot
Co-extrusion of dissimilar Al alloys via shear assisted processing and extrusion
Computational and Microstructural Analysis to understand the Correlation between Precipitate Distribution and Mechanical Properties in Al-Cu-Mg-Mn Wire Material
Correlation between electrochemical and standard testing of aluminum alloys
Corrosion Evaluations of Aluminium for Pre-Painted Products with Alternative Alloys and Comparable Test Methods
Deep neural network for the process recommendation of high strength Al-Zn-Mg-Cu alloys
Designing super-strong Al-Cu-Li alloys by engineering δ'/θ'/δ' composite precipitates
Development and Analysis of Near Shape Powder Processed Aluminum Alloy Materials
Development of a Machine Learning Model to Predict Constitutive Behaviour of Macrosegregated A356 Alloy
Development of high-strength 6xxx aluminium nanocomposites by direct-chill casting and thermo-mechanical processing
Effect of acoustoplasticity on forming force, material movement, and microstructure of incrementally formed sheets
Effect of alloying elements on strength properties and casting properties of corrosion resistant quench-free Al-Ca alloys
Effect of Bi Alloying Element Addition on Microstructural Change in Al-Mg-Si Alloys
Effect of cold rolling reduction and annealing temperature on stretcher strain marking behavior of a new Al-6Mg alloy
Effect of extrusion parameters and heat treatment on strength performance of low Sc 5181 alloy
Effect of graphene on the microstructure and properties of as-cast B319 aluminum alloy
Effect of homogenization on anodic film and electrochemical behavior of an A535 alloy after sealing with stearic sealant
Effect of interfacial bridging atoms in the Al/CNTs composites: machine-learning-based detection and experimental validation
Effect of minor alloying elements on mechanical properties of 6xxx series aluminum alloy sheets
Effect of post extrusion heat treatment on mechanical property of aluminum alloy 2024 tube produced using Shear Assisted Processing and Extrusion (ShAPE)
Effect of Step Aging Conditions on Mechanical Properties of AlMgSi Alloy Profiles for Automotive Industry
Effect of TiC nanoparticles on solidification processing and properties of Al-1.4Mg-0.8Si Alloy
Effects of Different Homogenization Conditions on High Strength Al-Mg-Si Alloys with Cu Addition
Enhanced electrical conductivity of aluminum and graphite nanoparticle alloys via temperature-controlled Shear Assisted Processing and Extrusion (ShAPE)
Enhanced load transfer and ductility in Al-9Ce alloy through heterogeneous lamellar microstructure design by cold rolling and annealing
Evaluation of As-Built Properties of Aluminum Alloys Manufactured using Various Directed Energy Deposition Techniques
Evaluation of corrosion properties of extruded Al-(6~9)Mg alloy sheets through a combination of extrusion and rolling process
Evolution of work hardening in 6xxx aluminum alloys in the course of natural aging following continuous annealing
Experimental and Modelling Investigation of Oxide Layer Fragmentation and Metal Micro-extrusion Behavior During Cold Rolling of Aluminum Alloy
Fabricating tubes with variable properties via shear assisted processing and extrusion
Fabrication of Aluminum Alloy 6063 Tubing from Secondary Scrap with Shear Assisted Processing and Extrusion
Formation Mechanisms of Surface Blistering in AA6xxx Rolled Products: Microstructure Characterization, Ultrasonic Analysis, and Rolling Tests
Grain Boundary Relaxation and its Effect on Plasticity in Nanocrystalline Aluminum
Growth morphology of nodular primary silicon in hypereutectic Al-Si alloy and growth mechanism
Heat-treatment response of Al–Mg–Si alloys with varying Mg/Si ratio
High Pressure Heat Treatment of Additively Manufactured High Strength Aluminum Alloys
High speed observations of ultrasonic fragmentation and de-agglomeration process of free-floating intermetallics and oxide particles
In-Situ Atom Probe Tomography to Study Interfacial Solute Segregation in a High-Temperature Al-Cu-Mn-Zr alloy
In situ processing of rapidly solidified Al-33wt%Cu droplets
Influence of heat treatment on the electrical resistivity of aluminum alloyed with zirconium and scandium
Influence of the Mg/Si ratio on speed extrusion of 6XXX alloys
Influence of tungsten nanoparticles on the structure and mechanical behavior under quasi-static loading
Interaction between recrystallization and second phase particles in Al-Mn alloy with impurities (Fe, Si)
Interplay Between Cooling Rate, Microstructure, and Mechanical Properties of an Al-Ce-Ni-Mn Alloy
Investigation of the effect of basalt fibers on the structure and mechanical properties of an А359 aluminum alloy
Investigation on the Deformation Mechanisms and Mechanical Properties of a Novel Al-Ce-Mg Alloy at Micro- and Macroscales
Joining of Aluminum Alloy 6061 using Additive Friction Stir Deposition
Light on: In Situ Investigation of Structural Transformation of Additive Manufactured Aluminum Alloys using Synchrotron Methods
Machine learning enhanced synchrotron X-ray tomography analysis of the convoluted 3D Fe-rich intermetallic phases in a recycled Al alloy
Micro and Mechanical Characteristic of Hotband Annealed of a Continuous Cast Al-1.5Cu alloy with Potential Application in High Strength and Low-cost Auto Forming Parts & Sheets
Microstructural Characterization and Vibration Damping Behavior of Al-NiTi Composites
Microstructural evolution of high Zn 7000-series aluminum alloy with addition of titanium
Microstructure and Mechanical properties of Mn-Sr modified iron containing Al-Si alloys
Microstructure and properties of graphene reinforced A356 aluminum alloy composites fabricated by gravity casting
Modeling of Springback Behavior in AA6016-T4 Sheet via an Elastoplastic Self-Consistent Model Incorporating Backstress
Multi-Alloy Aluminum Tubing via Shear Assisted Processing and Extrusion
New 6xxx Al-Mg-Si Alloy with High Formability for Structural Automotive Parts and Suitable for E-mobility Applications
On the Influence of Alloy Composition and Sn Micro-Alloying on Mechanical Properties and Corrosion Resistance of EN-AW 6056
Optimization of PBF process conditions for AlMg10ScZr alloy with balanced porosity level
Optimization of Twin Roll Casting Method of 5XXX Series Alloys for Automotive Applications Possible to be Produced with 6XXX Series Alloy
Phase transformation and microstructure evolution of Al-Mn alloy made by laser additive manufacturing
Precipitation hardening in innovative processing of 6xxx aluminum alloys
Quantification of Plastic Strain in the Precipitate Free Zone of Natural Aged Al-Mg-Si Alloys
Re-generating low value scrap into an innovative material with high integrated properties
Sample preparation influence on a direct artificially aged Al-Si-Mg alloy elaborated by laser beam melting
Solid Stir Extrusion: an innovative solid-state extrusion process
Solubility limit of Iron in Aluminum and its Alloys: Role on Recrystallization, Grain Growth, Texture and Interfacial Segregation leading to Ductile Failure
Strain Localization and Crack Initiation during Tensile Loading of High Strength 7XXX Aluminum Alloy
TEM dislocation interaction with the microstructure of an Al-Si-Mg alloy elaborated by laser beam melting
TEM study of dispersoid phases in 6082 alloys with Zr addition
Tensile Deformation Behavior of New Al-6Mg Alloys in Cold-rolled and Annealed States as Functions of Temperature and Strain Rate
The Effect of Strain Reversal on the Evolution of Microstructure and Hardness during High Pressure Torsion in Al-2.5wt% Mg alloy
The Flow Stress Behavior and Microstructural Evolution of Al-9Mg Extruded Sheet during Warm Tensile Deformation
The study on the relationship with rolling condition and properties in Al alloys
Through thickness localized strain distribution and microstructural characterization of functionally graded Al/GNP composite fabricated by friction stir processing
TiC Nanoparticles Effect on Natural Aging of Al-Zn-Mg Alloys
Understanding Pre-Solidified Grains in Structural Castings of Nemalloy HE700 Experiments
Weldability Study of AlMg5ScZr Alloys versus Common 5083 Alloy

Questions about ProgramMaster? Contact