ProgramMaster Logo
Conference Tools for 2022 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Symposium
Meeting 2022 TMS Annual Meeting & Exhibition
Symposium Advanced Real Time Imaging
Sponsorship TMS Structural Materials Division
TMS: Advanced Characterization, Testing, and Simulation Committee
TMS: Alloy Phases Committee
TMS: Biomaterials Committee
Organizer(s) Jinichiro Nakano, US Department of Energy - National Engergy Technology Laboratory
David E. Alman, National Energy Technology Laboratory
Il Sohn, Yonsei University
Hiroyuki Shibata, Tohoku University
Antoine Allanore, Massachusetts Institute of Technology
Noritaka Saito, Kyushu University
Anna Nakano, US Department of Energy National Energy Technology Laboratory
Zuotai Zhang, Southern University of Science and Technology
Candan Tamerler, University of Kansas
Bryan Webler, Carnegie Mellon University
Wangzhong Mu, Kth Royal Institute of Technology
David Veysset, Stanford University
Pranjal Nautiyal, University of Pennsylvania
Scope Real time observations can provide important information needed to understand materials behavior, as these techniques can provide temporal and spatial insights free from artifacts otherwise induced from conventional experimental techniques. Traditional and emerging advanced imaging techniques, which may be optical or non-optical, would allow such observations. Methods may be enhanced with capabilities that enable heating and cooling, controlled atmospheres, and application of stresses; and can be used to generate real time thermodynamic and kinetic data needed to study a variety of materials and processes. This symposium encompasses a broad range of materials science topics enabling cross-cutting opportunities for multiple disciplines (biomaterials, energy materials, functional materials, structural materials, etc.) while topics will be separately categorized in the technical program. Presentations are solicited on the application of these methods to materials science and industrial processes, as well as on development of such techniques.

Topics include, but not limited to:

• Studies using real time optical (e.g., visible light, white light, laser, IR, and UV) and non-optical (e.g., scanning probe, electron, and ultrasound) imaging techniques
• Researches using in-situ, in-operando, in-vitro, and in-vivo observation imaging techniques, such as thermal imaging furnace and other real time imaging methods
• Confocal techniques, including fluorescence and reflection types, which may be equipped with capabilities such as heating/cooling chambers, gas chambers, mechanical testing, Raman spectroscope, mass spectrometry, and FTIR
• Microscopic or telescopic imaging methods include hot thermocouple, resistance heating, and sessile drop techniques used for high temperature phenomena.
• Thermodynamic and kinetic data from these techniques, useful for phase diagram constructions, oxidation/corrosion modeling, phase formation kinetics studies, etc.
• Work using high speed and slow speed cameras
• Materials used in manufacturing real time imaging devices
• Novel technologies and methodologies for emerging imaging devices

The symposium plans to have joint sessions with:
• The Bio-Nano Interfaces and Engineering Applications symposium
• The Mechanical Response of Materials Investigated through Novel In-situ Experiments and Modeling symposium

Respective papers may participate in part of the dedicated sessions.

Abstracts Due 07/19/2021
Proceedings Plan Planned:
PRESENTATIONS APPROVED FOR THIS SYMPOSIUM INCLUDE

Advances in the Development of White-Light Interferometry for In-Situ Uranium Hydride Kinetic Growth
Analysis of In-Situ X-Ray Tomography Datasets of Dendritic Solidification Using 2D and 3D Machine Learning Algorithms
Application of High-Temperature Laser Confocal Scanning Microscopy in Phase Transformation and Microstructures Real Time Observation of Steels
Assessing the evolution of pit growth kinetics during atmospheric corrosion using in-situ X-ray tomography
Ca2+ and pH Imaging during Dissolution of CaSiO3 into Aqueous Solution
Challenges for Quantitative High-Temperature Confocal Scanning Laser Microscopy: Understanding the Temperature Profile
Determination of Strain Path Envelope in an Optimized Biaxial Cruciform Specimen of AISI 1008 Steel under Linear, Bilinear, and Nonlinear Strain Paths
Dissolution Behavior of Non-metallic Inclusions in Refining Slag Observed Using Confocal Scanning Laser Microscopes
Estimation of interfacial strain response for a bi-material strip in tensile and shear loading using THz-TDS
Evaluating cellular-level inhomogeneity through high-frequency ultrasound- a computational study
Evaluation of Dynamic Wetting Properties of Si/C Interface
Evaluation of Interfacial Energy between Molten Fe- 18%Cr-9%Ni Alloy and Non-Metallic Inclusion-Type Oxides at 1873K
High temperature in situ imaging and strain measurement during synthesis of monolithic zirconium hydride components
In-operando interactions of refractory materials with ash/slag from mixed feedstock gasification
In-situ investigation of deformation behavior of 5Mn steel at different strain rates by digital image correlation
In-situ observation of phase transformations in Co-based dual phase entropic alloys using high temperature confocal laser scanning microscopy
In-situ observation of SO2 gas formation at the magnetite/matte interface at 1200℃
In-situ X-ray imaging of melt flow and melt pool variation during laser metal additive manufacturing process
In Situ Atomic Force Microscopy Evaluation of the Normal Pressure-Dependent Lubrication Mechanism of Phosphonium Phosphate Ionic Liquid
In situ evidence of dynamic interactions between droplets and dendrites during rapid solidification of immiscible alloys
In Situ Observation and Investigation of the Wetting Behaviors of Mold Flux on Steel Substrate
Investigation of Echo Source and Signal Deterioration in Ultrasound Measurement of Metal Melt
Molten State Physical Properties of Divalent and Trivalent Alkaline Earth, Transition Metal, and Rare Earth Oxides
Observing nanoscale defect populations in nickel through transient elasticity
Phase evolution in water at high pressures from XRD and Raman spectroscopy: A combined MD simulation and experimental investigation
Pseudo-4D characterization of lamella orientations in locked Al-Al2Cu eutectic colonies
Real-Time Deformation Mechanisms of Hierarchically Structured Nanocomposites using High-Resolution In Situ Testing
Real-time optical visualization of battery reactions and processes
Real time observation of Reactive Spreading and Interfacial Reactions between Liquid AlNi alloy and Solid Ni
Real Time Quantification of Nickel, Cobalt, and Manganese Concentration Using Ultraviolet-Visible Spectroscopy- A Feasibility Study
Simultaneous extraction of nickel and vanadium from petroleum byproducts
Tension Compression Asymmetry and Plastic Anisotropy in Mg Single Crystal Response Evaluated Using Micromechanical Tests
Three-dimensional time evolution behavior of short fatigue crack morphology and crack closure in Ti-6Al-4V alloy assessed using high-energy imaging type CT
TWO-COLOR PYROMETRY AS A DEFECT PREDICTOR IN THE ADDITIVE MANUFACTURING OF 316L STAILESS STEEL
Ultrafast real-time imaging and modelling of the dynamics of fatigue liquid exfoliation of 2D graphite under ultrasound
Ultrasonic Doppler Velocimetry Technique for Investigation of Flows in Liquid Metal Batteries
Understanding deformation at the nanoscale via in situ SEM mechanical testing
Visualizing the Path of Corroding Mg Alloys using High Phase Contrast X-ray Computed Tomography


Questions about ProgramMaster? Contact programming@programmaster.org