ProgramMaster Logo
Conference Tools for 2023 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2023 TMS Annual Meeting & Exhibition
Symposium Magnesium Technology 2023
Presentation Title Development of Compound-vertical-retort Technology for Magnesium Production and its Application
Author(s) Fengqin Liu, Shaojun Zhang, Rongbin Li, Peixu Yang, Jinhui Liu, Michael A. Ren
On-Site Speaker (Planned) Michael A. Ren
Abstract Scope This paper introduces a new silicothermic process, compound-vertical-retort technology for magnesium production. It solves problems such as low mechanization, low productivity, short retort service life, high heat-resistant steel consumption, low magnesium yield, adhesion and glaze, poor furnace temperature uniformity, large heat losses, high carbon emissions and poor working environment, etc. A 1200 t/a Demonstration Plant has been built to demonstrate this technology. Ceramic-lined steel retort solved the problem of ‘adhesion and glaze’, with mechanical slag releasing; 99.8% Magnesium metal purity has been achieved via new compound magnesium crystallizer with radiation heating surface and sectional crystallization. Waste heat is recovered by a boiler for high-temperature slag for further saving energy and decreasing the CO2 emission. New dual-regenerative furnace was developed to realize temperature uniformity, to further improve combustion efficiency and heat efficiency. this new technology’s economic and technical indices are significantly better than that of the Pidgeon process.
Proceedings Inclusion? Planned:
Keywords Magnesium, Other, Other

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

A Comparative Corrosion Study of Magnesium Alloys Processed via Shear Assisted Processing and Extrusion
A Comparative Study about Hydroxyapatite Coated AZ31 and AZ91 Mg Alloys
A Theoretical Model for Predicting Stacking Fault Energies of Ternary Magnesium Alloys Based on High-throughput Calculation and Machine Learning
Advances in Magnesium Primary Production by Reactive Cathode Molten Salt Electrolysis with G-METS Distillation
Barrel Finishing of Magnesium Alloys
Combined Effect of Alloying and Grain Size on the Deformation Behavior of Magnesium Alloys
Design of the Continuous Gravity-driven Multiple Effect Thermal System (G-METS) for Efficient Low-cost Magnesium Recycling
Designing Highly Corrosion-resistant Mg Alloys via Second-phase Control
Development of Compound-vertical-retort Technology for Magnesium Production and its Application
Development of Magnesium-Strontium / Calcium (Mg-Sr/Ca) Based Alloys with Improved Sinterability for Next Generation Biomedical Implants
Development of Mg-based Superelastic Alloy through Aging Heat Treatment
E-13: Advanced In-situ Investigation of Deformation Behavior in a Textured Magnesium Alloy AZ31
E-14: Critical Resolved Shear Stresses for Slip and Twinning in Mg-Y-Ca Alloys and Their Effect on Ductility
E-15: Effect of Differential Speed Rolling (DSR) on the Dynamic Recrystallization of Mg5Zn Under Different Temperatures
E-16: Effect of Grain Size on Bio-corrosion Properties of AZ31 Magnesium Alloy
E-17: European Sustainable Magnesium from Chromite Production and Dolomite Excavation Residues
E-18: Flammability Resistant Magnesium Alloys Processed by Equal Channel Angular Pressing
E-19: Formation of CO2 Absorption Induced Corrosion Resistant Magnesium Carbonate Layer Formation on Various Magnesium Alloys
E-20: In Vitro and In Vivo Degradation Behavior of Novel Corrosion-resistant Mg Alloys
E-21: Investigating the Corrosion Response of Cast and Extruded ZK60 Magnesium Alloy Processed via Shear Assisted Processing and Extrusion
E-22: Investigation of Transformation-mediated Nanotwin Nucleation Mechanisms in Magnesium Using Deep Neural Network Interatomic Potentials
E-23: Kink Bands Strengthening of LPSO Mg-Zn-Y alloys After Processing by High-pressure Sliding (HPS)
E-24: Nucleation of {1012} Twins in Magnesium Through Reversible Martensitic Phase Transformation
E-25: Simulations of Microgalvanic Effects in Corrosion of Mg Alloys
E-26: Strain Rate Dependent Deformation Behavior and Microstructure Evolution of Magnesium Alloys
E-27: Strain-localized Deformation Banding during Tensile Deformation of Pre-compressed AZ31 Mg Alloy
E-28: Towards Improved Understanding of Press and Sinter Processing of Mg and Mg Alloy Powders
E-29: Understanding the Influence of Alloying on Texture Development in Mg-(Zn-Ca) Alloys During Recrystallization
Effect of Deformation Speed on Stress Corrosion and Fracture Toughness of Extruded Mg10Dy and Mg10Dy1Nd using C-ring Tests
Effect of Second Phases Evolved Through Heat Treatment on Mechanical and Bio-corrosion Behaviour of a Mg-Zn-Ca-Mn Alloy
Effects of Ca and Zn Additions on the Static Recrystallization Kinetics and Texture Evolution in Wrought Magnesium Alloys
Engineered Bioabsorption for Implant Applications
In Situ Study of the Degradation Behaviour Under Load of Mg1.8Y0.6Zn(1Ag) Using Synchrotron Tomography
In Vitro Degradation Assessment of Magnesium Wire in Sternal-closure-like Conditions
Influence of Corrosion Extent on Residual Tensile Strength and Corrosion Fatigue Properties of an Mg-Y-Nd Alloy Characterized by µCT
Influence of Preforging in Extrusion as well as in Equal-channel Angle Extrusion (ECAPEX) on the Properties of Magnesium Rods
Integrating Multimodal Corrosion with Correlative Microscopy Across Multiple Length Scales
Metastable – stable
Microstructure and Properties of Wrought Mg-Gd-Y-Zn-Zr Alloy (VW94) Alloy
Multiscale, Multimodal Characterization of Recrystallized and Non-recrystallized Grains during Recrystallization in a Hot-compressed Mg-3.2Zn-0.1Ca wt.% Alloy
Open-air Plasma Assisted Si-O-C Layer Deposition on AZ91D Mg Alloy for Corrosion Mitigation
Optimization of the Microstructure and Performance of Aluminum Alloy Cold Spray Coatings on Magnesium Alloys
Precipitation Behavior in Low-alloyed Mg-Ca-Zn Alloys
Processing Map and Performance of a Low-cost Wrought Mg Alloy: ZAXEM11100
Protective Micro-arc Oxidation Surface Coating on AZ80 Forged Magnesium Alloy
Quantifying the Role of Coarse Intermetallic Particles on Twinning Behavior
Recent Advances in PRISMS-plasticity Software for Simulation of Deformation in Mg Alloys
Reductant Consideration in Thermal Pathways to Primary Magnesium Metal Production
Solid Phase Processing of Mg-Al-Mn-Ca for High Strength and Ductility
Sustainable Domestic Manufacturing and Protecting IP in a Post-AIA World
The Effects of Temperature and Strain Rate on the Tensile Behaviour of Die-cast Magnesium Alloy AE44
The Mechanisms to Improve Creep Resistance in a Die-cast MgREMnAl Alloy

Questions about ProgramMaster? Contact programming@programmaster.org