ProgramMaster Logo
Conference Tools for 2023 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2023 TMS Annual Meeting & Exhibition
Symposium Advanced Real Time Imaging
Presentation Title In-situ TEM Study of Rapidly Solidifed AlCuLi Based Alloys
Author(s) Rostislav Kralik, Lucia Bajtošová, Barbora Křivská, Miroslav Cieslar
On-Site Speaker (Planned) Rostislav Kralik
Abstract Scope AlCuLi based alloys are high strength, low density alloys which have been of high interest for bulk applications to the aircraft and automotive industries when prepared by ingot casting methods. Rapidly solidified AlCuLi alloys present a sparsely studied system, which could find use in other applications, such as MEMS components. The high solidification rate leads to formation of a fine grained to amorphous microstructure and formation of highly non-equilibrium crystalline and quasicrystalline phases. Systems where crystallite size is comparable to size of strengthening and constituent phases can be of interest for potential applications, but also studying of fundamental processes of materials science such as and phase transformations. When studied by in-situ annealing and phase mapping in TEM these processes are observed in real time with very high resolution.
Proceedings Inclusion? Planned:
Keywords Aluminum, Phase Transformations, Characterization

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

4D Microstructural Evolution of Bismuth (Bi) Phase during Solidification of Sn-58Bi Solder
Behavior of Plastic Ashes in Gasification Environments
Energy Absorption Properties of Open-Cell Rhombic Dodecahedron Cellular Lattice Structures Under Shock Compression
Estimation of Interfacial Strain Response for a Bi-material Strip in Tensile and Shear Loading Using THz-TDS
High-Temperature Wetting of Calcium Alloys and Molten Salts
In-situ Monitoring and Post Operando Analysis of Additively Manufacturing Lunar Regolith Simulants Parts
In-situ TEM Study of Rapidly Solidifed AlCuLi Based Alloys
In-situ Visualization of Retrograde Melting Phenomenon During Solidification of Boron-bearing Steels
L-9: In-situ Magnetic Computed Tomography for Additive Manufacturing
Machine Learning for In-situ Detection of Local Heat Accumulation in Additive Manufacturing
Mapping the Melt Pool Variability in L-PBF Additive Manufacturing by High-Speed Imaging
Microstructure Evolution during Laser-based Powder Bed Fusion Studied by Operando X-ray Radiography
Prediction of Laser Absorptivity from Synchrotron X-ray Images Using Deep Convolutional Neural Networks
Real-time Plasmon-Enhanced Colorimetric Imaging
Real Time Imaging of Laser Melting and Re-Solidification
Recent Advances in Ultrafast Real-time Imaging of Sonoprocessing Advanced Materials
Study of Fracture Behaviors of Epoxy-Alumina Composite Using Mechanical Testing Coupled with Micro-CT
The Influence of Temperature on Strength: Are Concentrated BCC Alloys Different than Elements and Dilute Alloys?
Thermal Stability of fcc-bcc Nanolaminates Containing 3D Interfaces
Three-dimensional Assessment of Strain Localization at the Sub-grain Level of a Ni-based Superalloy at Low and High Temperature Using Laser Scanning Confocal Microscopy
Visualization of Molten Slag Suspension by Electrical Impedance Tomography

Questions about ProgramMaster? Contact programming@programmaster.org