ProgramMaster Logo
Conference Tools for MS&T22: Materials Science & Technology
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting MS&T22: Materials Science & Technology
Symposium 50 Years of Characterizing Structural Ceramics and Glasses: Recognizing the Contributions of George Quinn
Presentation Title Failure Analysis of Sub-ballistic Contact in Glass
Author(s) Erick Van Duyne, Kody Bornstein, Camden Isenberg, Amber Tremper, Robert Burguess, Steven DeMartino, G. Scott Glaesemann
On-Site Speaker (Planned) Erick Van Duyne
Abstract Scope Damage introduction and failure of glasses and ceramics from contact with sharp, hard objects is well-understood. This understanding is built upon knowledge gained from relatively slow quasi-static testing as well as that performed under ballistic conditions. Many current applications have failure modes for glass materials that are on the faster end of quasi-static impact, where damage introduction occurs in milli-seconds. This regime is much faster than traditional quasi-static testing, but is well short of the ballistic regime. This study brings together high speed video, load tracking and fractography within a fracture mechanics framework to deconstruct failure scenarios under these sub-ballistic dynamic conditions.
Proceedings Inclusion? Undecided

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

A Quintessential Standards Writer and the Tangible Benefits of Standards
Advanced Proof Testing for Structural Ceramics
Failure Analysis of a Large SiC Component
Failure Analysis of Sub-ballistic Contact in Glass
Fractal Analysis of Brittle Fracture and Crack Branching
Fracture Mechanics Implications of Complex Contact Damage on Measured Strength of Glass
Interpretation of ZerodurŪ Strength Data
Observations in Fracture Toughness Testing of Glasses and Optical Ceramics
On the 3rd Edition of the NIST Guide to Fractography of Ceramics and Glasses
On the Controversies during the Creation of Flexure Strength Standards MIL STD 1942 and ASTM C 1161
On the Elastic Isotropy of the Entropy-stabilized Oxide (Mg, Co, Ni, Cu, Zn)O Compound
Sectored-flexural and Rotational-Flexural-strength Testing of Brittle Material Cylinders and Tubes
Static and Dynamic Compression Strength of Ceramics and Glasses

Questions about ProgramMaster? Contact programming@programmaster.org