ProgramMaster Logo
Conference Tools for 2021 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2021 TMS Annual Meeting & Exhibition
Symposium Advanced High Strength Steels V
Presentation Title Correlation of Rolling Schedules, Mechanical Properties, and SCC Susceptibility of API X70 Steel
Author(s) Anthony Roccisano, Shahrooz Nafisi, Reza Ghomashchi
On-Site Speaker (Planned) Anthony Roccisano
Abstract Scope The role of thermomechanical rolling schedules on the development of crystallographic texture and mechanical properties were studied in an API (American Petroleum Institute) 5L X70 steel. The finish rolling temperature and deformation (rough and finish rolling) were highly influential on the development of crystallographic texture and the resulting mechanical properties. Complete rolling above the TNR resulted in the formation of large, equiaxed grains and the highest yield strength and ultimate tensile strength. When decreasing the finish rolling temperature, but remaining above the Ar3, an increase in the initial rough rolling deformation increased the proportion of granular bainite within the structure. In addition, marked increase in the higher intensity of {554}<225> and {332}<113> textures was observed with increasing rough rolling deformation. Finish rolling in the two-phase region increased the polygonal ferrite formation, resulting in the worst mechanical properties of the rolled steels.
Proceedings Inclusion? Planned:

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

A Novel Study on Plasticity Mechanisms during Yield Point Elongation in Medium Manganese Steels
A Spatial Spin Average Approach to Model Austenitic Steels Using First Principle Calculations
Carbon Content in Carbide-free Bainite during Isothermal Transformations
Correlation of Rolling Schedules, Mechanical Properties, and SCC Susceptibility of API X70 Steel
Cryogenic Tensile and Microstructural Behaviors of High Manganese Steel Welds
Dislocation Densities during Martensite Transformation in a Low-carbon Steel Determined by In Situ High Energy X-ray Diffraction
Effect of Nb and Mo Addition on Tensile Properties and Bendability of Hot-rolled and Tempered Matensitic Steels
Effect of Phase Stability of Retained Austenite during Deformation in Low-alloy Multiphase Steels
Effect of Rolling Conditions on Microstructure and Mechanical Properties of Medium Mn Steel
Effects of Cold Rolling on Austenite Formation in a QLT-Treated High-Ni Martensitic Steel
Effects of V and Mo Additions on the Suppression of HAZ Softening of Friction Stir Welded Si-Mn Martensitic Steel
Ferrite Recrystallization Investigated by In Situ High Energy X-ray Diffraction Experiments
High-resolution Integrated Experimental-numerical Testing of Ferrite-pearlite Steels
High Strength Transformation Induced Plasticity-maraging Stainless Steel
In Situ Investigation of Stacking Fault Energy Dependent Deformation Response of a Medium-Mn Steel
Low-density Steels: Processing Pathways and Alloying Strategies in Medium Mn, Al-added Steels
Methods for Improving the Hydrogen Embrittlement Resistance in Press-hardened Steel
Microstructural and Plastic Deformation Study of a Multi-phase Advanced High Strength Steel
Microstructural Characterization of Fracture in Fe-10 pct Ni Gas Metal Arc Welds
Microstructural Refinement and Homogenization of High Strength Austenitic Steels for Lightweighting Using Equal Channel Angular Pressing
Microstructure-based Predictions of the Effect of Inclusions on the Bendability of Advanced High Strength Dual-phase Steels
Nanoscale Investigation of Austenite/Ferrite Interfaces in Medium Carbon Fe-Mn-C Steels at Different Inter-critical Temperatures
Phase Evolution of Triple Nano-precipitate Strengthened Mn-stabilized Austenitic Steel
Properties and Performance of Fe-Mn-Al-C Alloys as a Function of Composition
Revisit the Slow Strain Rate Test for Hydrogen Embrittlement of Press-hardened Steel
Role of Metal Carbides in the Formation of Austenite in a High-Ni Martensitic Steel
Stacking Fault Energy Dependent Deformation Mechanisms in Medium-Mn Steels
Static Recrystallization during Hot Deformation of HSLA Nb-Bearing Steels
Strain Path Effect on Martensitic Transformation in Medium Mn Steels
Strain Rate Sensitive Martensite Transformation in a Q&P Steel
Twinning-induced Plasticity of Austenitic Lightweight High-entropy Steel
Use of Physical Simulations for Accelerated Welding Procedure Development in Supermartensitic Stainless Steels
Use of Thermo-mechanical Simulation to Assess Liquid Metal Embrittlement (LME) in Zinc Coated Advanced High Strength Steels

Questions about ProgramMaster? Contact programming@programmaster.org