ProgramMaster Logo
Conference Tools for 2020 TMS Annual Meeting & Exhibition
Register as a New User
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2020 TMS Annual Meeting & Exhibition
Symposium Refractory Metals 2020
Presentation Title Molybdenum Foil Tensile Testing
Author(s) Brandon M. Kenny, Gary A. Rozak
On-Site Speaker (Planned) Brandon M. Kenny
Abstract Scope The tensile properties of molybdenum (Mo) foil (<0.13 mm thick) are sparsely documented in open literature. Older tensile data may not reflect the current commercially pure Mo because refining methods are improving purity levels over time. Additionally, the strength of Mo is affected by the thermo-mechanical processing history. This presentation examines the tensile properties of molybdenum foil in various conditions with testing guided by ASTM protocol. Mo foil is prepared with different heat treat conditions, various sample preparation techniques, geometry, and test variables. The effects of processing and testing variables are evaluated via tensile properties, stress-strain curves, and fracture surfaces for a variety of test conditions. Molybdenum foil testing, results, and applications will be covered extensively throughout the presentation.
Proceedings Inclusion? Planned: Supplemental Proceedings volume


Alloying for Precipitation Hardening in Chromium
Development of Refractory Complex Concentrated Alloys RCCAs Using Diffusion Couple Approach
Dislocation Multiplication from a Frank-Read Source in Six Body-centered Cubic Refractory Metals
Dynamic Grain Growth in Refractory Metals
Effect of Dislocations and Grain Boundaries on Magnetic Flux Trapping in High-purity Niobium used for Superconducting Radio Frequency Cavities
Effect of Strain Rate on the Anisotropic Tensile Mechanical Properties of High Purity Niobium Single Crystals
Hot Isostatic Pressing of WC-3009 Niobium-Based Refractory Alloy
Intermetallic Precipitate Reinforced Refractory Metal Alloys toward ‘bcc-superalloys’
Mechanical Testing of Tungsten-Steel Laminate Composites for use in Fusion Applications
Microstructure, Microhardness and Oxidation Behavior of Mo-Si-B alloys in the Moss+Mo2B+Mo5SiB2 Three Phase Region
Modifying Grain Boundary Cohesion in Ultra-fine Grained Tungsten and Tungsten-based Nanocomposites through Systematic Doping
Molybdenum Foil Tensile Testing
Performance of Niobium and Molybdenum Alloys for High Temperature Sensing Applications
Pressureless Sintering and Microstructure Evolution of Ultrafine-grained Tungsten
Refractory Alloys 3D Printing for Missile and Space Applications
Seeking Toughness in Mo-Si-B: Composites of Stable Oxides
Static and Dynamic Grain Growth in Niobium at 1200 to 1500℃
The Influence of Dislocation Density on Thermal Conductivity in Pure Niobium from 2-9K
Thermally Activated Deformation Processes in W-Re Alloys
ZrC-W Composites Prepared by Reactive Melt Infiltration of Zr2Cu Alloy into Binder-jet Printed WC Preforms

Questions about ProgramMaster? Contact