ProgramMaster Logo
Conference Tools for 2021 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2021 TMS Annual Meeting & Exhibition
Symposium Energy Technologies and CO2 Management
Presentation Title Effects on Operational Capabilities and Lifecycle of Commercially Available Li-ion Batteries Due to Partial Nail Penetration from Drop Hammer Impact Test
Author(s) Casey M. Jones, Bing Li, Vikas Tomar
On-Site Speaker (Planned) Casey M. Jones
Abstract Scope The purpose of this work was to simulate the operation of a cell in an abusive environment, such as those found in electric vehicles, aerospace applications, etc. A drop hammer test rig implementing a nail was used to penetrate approximately halfway through each cell during cycling at a rate of 1C, and the cells were allowed to continue cycling afterwards. The penetrations caused a rapid spike in temperature, resulting in decomposition of the electrolyte and solid electrolyte interface. Combined with the physical damage to the electrodes, this generated an accelerated aging of the cells under test. The discharge capacity for the first cycle after penetration was approximately 10% lower for each cell, and each cell’s capacity reached end-of-life criteria in an average of 43 cycles after the penetration. Peak incremental capacity values decreased approximately 15% by end-of-life as well, also showing a decreasing state of health after penetration.
Proceedings Inclusion? Planned:

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

A Study of Numerical Modeling of Jet Heating Phenomenon in a Porous Media
CO2 Emission Calculation Model of Integrated Steel Works Based on Process Analysis
Effects on Operational Capabilities and Lifecycle of Commercially Available Li-ion Batteries Due to Partial Nail Penetration from Drop Hammer Impact Test
Excitonic Effects in Absorption Spectra of Carbon Dioxide Reduction Photocatalysts
Experimental Study and Numerical Modeling of Nanoparticle Injection Technology for Remediating Leaks of CO2 Storage
Experimental Study on Dust Removal Performance of Dynamic Wave Scrubber for Smelting Flue Gas
High Temperature Properties in Ferritic Heat Resistant Steels with Intermetallic Precipitates for High Efficient Heat Recovery Systems
Homogenization of the Dense Composite Membranes for Carbon-dioxide Removal
Hydrodynamics of Gas-liquid Two-phase Flow in Reverse Spray Washing Process
In-situ Electrode Temperature Monitoring and Thermal Runaway Detection of Li-ion Pouch Cell
Influence of Coal Reactivity on Carbon Composite Briquette Reaction in Blast Furnace
Low Energy Mesoporous Silica Recovery from a Nigerian Kaolinite Ore for Industrial Value Additions
Prediction Model of Converter Oxygen Consumption Based on Recursive Classification and Feature Selection
Reduction Behaviors of Hematite to Metallic Iron by Hydrogen at Low Temperatures
Simulation and Optimization of Defluorination and Desulfurization Processes of Aluminum Electrolysis Flue Gas
The Influence of Hydrogen Injection on the Reduction Process in the Lower Part of Blast Furnace: A Thermodynamic Study

Questions about ProgramMaster? Contact programming@programmaster.org