ProgramMaster Logo
Conference Tools for 2023 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2023 TMS Annual Meeting & Exhibition
Symposium Aluminum Reduction Technology
Presentation Title Mathematical Modelling of the Desulfurization of Electrolysis Cell Gases in a Low Temperature Reactor
Author(s) Arash Fassadi Chimeh, Duygu Kocaefe, Yasar Kocaefe, Yoann Robert, Jonathan Bernier
On-Site Speaker (Planned) Arash Fassadi Chimeh
Abstract Scope SO2 is one of the main sources of acid rain and air pollution. Use of powdered alkaline sorbents is an effective means of removing SO2. This semi-dry process is more economical and efficient than wet or dry desulfurization processes. The reaction between the sorbent (hydrated lime, Ca(OH)2) and SO2 is dominated by the adsorption process. In this study, a mathematical model has been developed to simulate the lab-scale desulfurization reactor employed for the low temperature gases containing low SO2 concentration coming out of the electrolysis cells used for aluminum production. A parametric study was carried out in order to examine the effects of certain parameters, such as inlet SO2 concentration and sorbent flowrate on the desulfurization efficiency. The model and some of the results will be presented in this article.
Proceedings Inclusion? Planned: Light Metals
Keywords Environmental Effects, Modeling and Simulation, Other

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

Achieving Low Pot Failure Rate at Aditya Aluminium
Application of Cell Retrofit in GP320 Aluminum Reduction Cell Line
CFD Modelling of Solidification and Melting of Bath during Raft Formation
Dissimilar Results in Restarting Two Different Potlines
Evaluation of Methodologies for Assessment of SO3 Concentration in Industrial Off-gas
Experimental Investigation of the Alumina Cloud During Alumina Injections in Low And High Temperature Conditions
Fundamental Mass Transfer Correlations Based on Experimental and Literature Data
Fundamentals of Pot Ventilation in Aluminum Smelters
Mathematical Modelling of the Desulfurization of Electrolysis Cell Gases in a Low Temperature Reactor
Numerical Investigation of the Thermal, Electrical and Mechanical Behaviour of Aluminum Reduction Cell during Preheating Phase
Potential of Production Al-Si Green Alloys in AP18 Aluminium Reduction Cell
Preheat, Start-up and Early Operation of DX+ Ultra Pots at 500 kA
Recent Improvements to a Mathematical Model Replicating the Wave and Stream at the Bath-metal Interface
Restart of Albras’ Potline 2 – Improving Performance and Changing Paradigms
Simplified 3D MHD Model for Quick Evaluation of Aluminium Electrolysis Cell Design
The Expanded Industrial Pilot of SAMI’s NCCT+ Technology
The SY500 Potline Technology Development

Questions about ProgramMaster? Contact programming@programmaster.org