ProgramMaster Logo
Conference Tools for 2024 TMS Annual Meeting & Exhibition
Login
Register as a New User
Help
Submit An Abstract
Propose A Symposium
Presenter/Author Tools
Organizer/Editor Tools
About this Abstract
Meeting 2024 TMS Annual Meeting & Exhibition
Symposium Aluminum Reduction Technology
Presentation Title Preliminary Testing and Simulations of Pot Integrated Abart (PIA) at Alcoa Mosjøen
Author(s) Asbjørn Solheim, Anders Sørhuus, Ole S. Kjos, Håvard Olsen, Helene M.E Granlund
On-Site Speaker (Planned) Håvard Olsen
Abstract Scope As most electrolysis pots in an aluminium potline will have different rates of fluoride losses, while the secondary alumina from the GTC will contain an average fluorine content an imbalance will occur over time leading to instability and require corrections by additions of fluoride or removal of excess bath. The development of the Pot Integrated Abart (PIA) technology from REEL will address this issue by having dedicated dry scrubbers for each pot. A research PIA unit has currently been built and testing was started at Alcoa Mosjøen in Q4 2022. The results and findings from the early stages of operations will be discussed, as well as direct impacts on measurable cell parameters. Further the results will be used as input for predictions on how cell stability and operations in the potroom is affected by the introduction of the PIA.
Proceedings Inclusion? Planned: Light Metals
Keywords Aluminum, Environmental Effects, Process Technology

OTHER PAPERS PLANNED FOR THIS SYMPOSIUM

A Method for Anode Effect Prediction in Aluminum Electrolysis Cells Based on Multi-scale Time Series Modeling
A Method of Cell Heat Balance Control to Enable Variable Power Usage by Aluminium Smelters
A Review of Challenges and Solutions in Ledge Control and Measurement in Aluminium Electrolysis Cell
Accurate Measurement of Anode Current in Aluminum Electrolysis: From Ideal to Reality
Aluminium Carbide and Carbon Dust in Aluminium Electrolysis Cells. A Conceptual Model for Loss in Current Efficiency
Amperage Increase Program and Enablers in EGA Al Taweelah DX Technology Potlines
Application of SAMI Energy-saving and Current-intensifying Technology in a 330kA Potline
Cathode Inspection and Repair Procedure Improvements in ALBRAS
Cell Startup and Early Operational Improvements in ALBRAS
Combining New and Old Cathode Block Assembly to Increase the Lifetime of Pot at INALUM
Computational Simulation of Electromagnetic Fields in an Aluminum Electrolysis Cell
Construction and Application of Digital Twin in Aluminum Electrolysis
Correlation Between Corrosion Rate and Electrochemical Parameters of Anode Process on a Metallic Electrode in Molten Oxyfluorides
Cradle-to-Gate Carbon Footprint Assessment of Graphite Cathode for Aluminium Electrolysis Pots
Design and Trial of Electrical Collector Plate in Cathode Assemblies
Determination of the Air-gap Distribution at the Cast Iron to Carbon Cathode Interface Using a 3D Scanning Approach
Dimensional Analysis Applied to the Dissolution and Disintegration of Alumina Rafts: The Riddle of Dissolving Alumina Rafts Solved
Direct Production of Al-Mn Alloys during the Electrodeposition of Aluminium in a Laboratory Cell
Electrowinning of Al-Sc Master Alloys in the LiF-AlF3-Sc2O3 Melts
Estimation of the Spatial Alumina Concentration of an Aluminium Smelting Cell Using a Huber Function-based Kalman Filter
Factors Affecting the Performance of Oxygen Evolving Ni-Fe-Cu Anodes in Low Temperature Molten Fluoride Electrolyte for Aluminium Electrowinning
Fundamental Loss of Current Efficiency During Aluminium Electrolysis and its Correlation With Sodium Content Dissolved in the Aluminium
Influence of Low Temperature on the Surface and Morphological Properties of Hydrated Lime in SO2 Desulfurization Reaction
Limits for the Current Efficiency in Hall-Héroult Cells
Low Carbon Emission Technology Upgrading Industrial Pilot of 350kA Pots
Metal Tapping Yoke and Platform Modification for Improved Locking and Unlocking
MHD Stability of Aluminium Cells - Cathode Design Effects
Modeling and Design of the Cathode Block Assembly Using Different Types of Models
New 32h Tapping Cycle Implementation at ALBRAS
Novel Developments for Inert Anodes and Wettable Cathodes in Aluminium Electrolysis
Numerical Modeling of Anode Changes and Their Effect on Current Distribution and Magnetohydrodynamic Behavior of an Aluminium Cell
Online Monitoring of Metal Oxides in Molten Fluoride Electrolytes
Pot Failure Prediction at Emirates Global Aluminum (EGA)
Predicting Electrolyte and Liquidus Temperatures of Aluminium Smelting Cells for Power Modulation Using Dynamic Model
Preliminary Testing and Simulations of Pot Integrated Abart (PIA) at Alcoa Mosjøen
Re-usage of Big Butt
Regeneration of Aluminum Fluoride from Pure Bath
Restart of AP30 Cells at Boyne Smelters
SMARTCrane, a Fives' Digital Solution for Aluminium Production Optimization
Specific Energy Reduction Through Design Modifications at Aditya Aluminium Smelter
Study of the Degradation of Ordinary Refractory Bricks in an Aluminium Reduction Cell
Sustainability of Different Aluminium Production Technologies
Thermal Analysis of Operational Events Affecting Electrolysis Cells and Their Local Alumina Dissolution Conditions
Thermoelectrical Analysis of Lying-bed Patterns during Preheating Phase

Questions about ProgramMaster? Contact programming@programmaster.org